Parameters: ECG, RESP, NIBP, SpO 2, TEMP
MEC-1200
Patient Monitor
Technical Specifications
Safety Monitor mode: ≥ 105 dB
Meet requirement of IEC60601-1,CE Marking according to MDD93/42/EEC Surgery mode: ≥ 105 dB
Calibration Signal: 1mV 5%
Dimension and weight Bandwidth: Diagnostic mode: 1~15 Hz
Dimension: 258(W) x 128(D) x 244(H) mm Monitor mode: 0.5~35 Hz
Weight: 4.0 kg (max) Surgery mode: 0.05~100 Hz
Alarm Range: Adult: 15-300 BPM
Power Supply Pediatric/Neonatal: 15-350 BPM
Power Source: AC mains power or Internal battery power S-T detection: YES
AC Mains Power Source Measurement range: -2.0mV~2.0mV
Power Requirements: AC 100~240V (± 10%) Alarm range: -2.0mV~2.0mV
Line Frequency: 50/60 Hz (± 3Hz) Arrhythmia analysis: YES
Consumption: 80W Pacemaking analysis: YES
Battery Power(optional) Alarm: YES, audible and visual alarm, alarm events recallable
The maximum number of installed battery: 1
Battery Capacity: 2.3amp-hour Respiration
Operating time: 120 minutes under the normal use and full charge Method: RA-LL impedance
Measurement Range: Adult: 0~120 BrPM
Storage Environment Pediatric/Neonatal: 0~150BrPM
Temperature: -20℃ to +60℃ Resolution: 1 BrPM
Humidity: 10% to 95%, non-condensing Accuracy: ± 2% or± 2 BrPM, whichever is greater
Alarm Range: Adult: 0~120 BrPM
Operation Environment Pediatric/Neonatal: 0~150 BrPM
Temperature: 0℃ to +40℃ Apnea Alarm: YES, and apnea delay: 10-40 seconds
Humidity: 15% to 95%, non-condensing
NIBP
Patient Range Method: Oscillometric
Adult, pediatric and neonatal Operation Modes: Manual/Automatic/Continuous
Measurement Unit: mmHg/kPa selectable
Performance Specification Measurement Types: Systolic pressure, Diastolic pressure and Mean pressure
Display: 8.4" color active matrix TFT Measurement Range: Adult: 10-270 mmHg
Resolution: 800x600 Pediatric: 10-200 mmHg
Trace: 4 waveforms Neonatal: 10-135 mmHg
Sweep Speed: 6.25, 12.5, 25 and 50mm/s Over-pressure Protection: YES
Indicator: Alarm indicator light Resolution: 1 mmHg
Power indicator light Accuracy: Maximum Mean error: 5mmHg
Audio indicators for QRS beep and alarm sound Maximum Standard deviation: 8mmHg
Interface: Networking Alarm: Systolic, Diastolic and Mean
Battery: Rechargeable
Trend time: 1~72 hours Temperature
Alarm: 3-level audible and visual alarm Scale: 0℃ and oF selectable
Recorder(optional): Built-in, thermal array, 2 channels Measurement Range: 0~50 ℃ or 32-122 oF
Record width: 48mm, (record paper 50mm) Resolution: 0.1 ℃ or 0.1 oF
Record speed: 25mm/s, 50mm/s Accuracy: ± 0.1 C (0℃ to 50℃), exclusive of probe errors
± 0.2 F (32 o F to 122 o F), exclusive of probe errors
ECG Channel: 1 channel
Lead Type: 3-lead Alarm Range: 0~50 ℃
Input: 3-lead: RA; LA; LL or R; L; F
Lead Selection: 3-lead: I; II; III SpO 2
ECG Waveform: 1 channel SpO 2
Gain Selection: x0.25, x0.5; x1; x2; auto Range: 0~100%
Sweep Speed: 12.5mm/s, 25mm/s, 50mm/s Accuracy: 70% ~ 100%: 2%
Heart Rate Range: Adult: 15~300BPM 0% ~ 69%: unspecified
Pediatric/Neonatal: 15-350BPM Pulse Rate
Accuracy: 1BPM or ±1%, whichever is greater Range 20-254 BPM
Resolution: 1BPM Accuracy: ±2BPM or 2%, whichever is greater
Protection: Withstand 4000VAC/50Hz voltage in isolation.
Anti-electrosurgical interference and defibrillation
CMRR: Diagnostic mode: ≥ 90 dB
Standard Configuration Options
ECG, RESP, NIBP, TEMP, SpO 2 Thermal Recorder, Lead Acid Battery
P/N:ENG-MEC1200-210285-20070128
