Product Datasheet
Santoprene™ 101-64
Thermoplastic Vulcanizate
Product Description Key Features
A soft, black, versatile thermoplastic vulcanizate (TPV) in the • UL listed: file #QMFZ2.E80017, Plastics - Component; file
thermoplastic elastomer (TPE) family. This material combines good #QMFZ8.E80017, Plastics Certified For Canada - Component.
physical properties and chemical resistance for use in a wide range • Recommended for applications requiring excellent flex fatigue
of applications. This grade of Santoprene TPV is shear-dependent resistance.
and can be processed on conventional thermoplastics equipment for • Excellent ozone resistance.
injection molding, extrusion or blow molding. It is polyolefin based
and recyclable within the manufacturing stream.
General
Availability 1 • Africa & Middle East • Europe • North America
• Asia Pacific • Latin America
Applications • Automotive - Air Induction System Ducts
• Automotive - Boots and Bellows for Steering and Suspension
• Automotive - Plugs, Bumpers, Grommets, Clips
• Automotive - Seals and Gaskets
• Automotive - Weather Seals
• Consumer - Electronics
• Consumer - Floor Care
• Industrial - Seals and Gaskets
• Tubing
Uses • Appliance Components • Diaphragms • Seals
• Automotive Applications • Electrical Parts • Tubing
• Automotive Under the Hood • Gaskets
• Consumer Applications • Outdoor Applications
Agency Ratings • UL QMFZ2 • UL QMFZ8
RoHS Compliance • RoHS Compliant
Automotive Specifications • CHRYSLER MS-AR-100 BGN • FORD WSD-M2D379-A1 • GM GMW15813 Type 5
UL File Number • E80017
Color • Black
Form(s) • Pellets
Processing Method • Blow Molding • Extrusion Blow Molding • Multi Injection Molding
• Coextrusion • Injection Blow Molding • Profile Extrusion
• Extrusion • Injection Molding • Sheet Extrusion
Revision Date • 04/01/2017
Physical Typical Value (English) Typical Value (SI) Test Based On
Density / Specific Gravity 0.970 0.970 ASTM D792
Density 0.970 g/cm³ 0.970 g/cm³ ISO 1183
Outdoor Suitability f1 f1 UL 746C
Detergent Resistance f3 f3 UL 749
Detergent Resistance f4 f4 UL 2157
Hardness Typical Value (English) Typical Value (SI) Test Based On
Shore Hardness ISO 868
Shore A, 15 sec, 73°F (23°C) 70 70
Effective Date: 04/01/2017 ExxonMobil Page: 1 of 4
Product Datasheet
Santoprene™ 101-64
Thermoplastic Vulcanizate
Elastomers Typical Value (English) Typical Value (SI) Test Based On
Tensile Stress at 100% - Across Flow 410 psi 2.83 MPa ASTM D412
(73°F (23°C))
Tensile Stress at 100% - Across Flow 410 psi 2.83 MPa ISO 37
(73°F (23°C))
Tensile Strength at Break - Across Flow 938 psi 6.47 MPa ASTM D412
(73°F (23°C))
Tensile Stress at Break - Across Flow 938 psi 6.47 MPa ISO 37
(73°F (23°C))
Elongation at Break - Across Flow 450 % 450 % ASTM D412
(73°F (23°C))
Tensile Strain at Break - Across Flow 450 % 450 % ISO 37
(73°F (23°C))
Tear Strength - Across Flow ISO 34-1
73°F (23°C), Method Ba, Angle 131 lbf/in 22.9 kN/m
(Unnicked)
Compression Set ASTM D395B
158°F (70°C), 22 hr, Type 1 25 % 25 %
257°F (125°C), 70 hr, Type 1 44 % 44 %
Compression Set ISO 815
158°F (70°C), 22 hr, Type A 25 % 25 %
257°F (125°C), 70 hr, Type A 44 % 44 %
Thermal Typical Value (English) Typical Value (SI) Test Based On
Brittleness Temperature -76 °F -60 °C ASTM D746
Brittleness Temperature -76 °F -60 °C ISO 812
RTI Elec 194 °F 90.0 °C UL 746
RTI Str UL 746
0.04 in (1.0 mm) 194 °F 90.0 °C
0.06 in (1.5 mm) 194 °F 90.0 °C
0.12 in (3.0 mm) 203 °F 95.0 °C
Electrical Typical Value (English) Typical Value (SI) Test Based On
Volume Resistivity ASTM D257
73°F (23°C), 0.0787 in (2.00 mm) 1.0E+16 ohms·cm 1.0E+16 ohms·cm
73°F (23°C), 0.126 in (3.20 mm) 5.0E+15 ohms·cm 5.0E+15 ohms·cm
Dielectric Strength ASTM D149
73°F (23°C), 0.0787 in (2.00 mm) 680 V/mil 27 kV/mm
Dielectric Constant ASTM D150
73°F (23°C), 0.0780 in (1.98 mm) 2.50 2.50
Dielectric Constant IEC 60250
73°F (23°C), 0.0780 in (1.98 mm) 2.50 2.50
Comparative Tracking Index (CTI) PLC 0 PLC 0 UL 746
High Amp Arc Ignition (HAI) PLC 0 PLC 0 UL 746
High Voltage Arc Resistance to Ignition PLC 6 PLC 6 UL 746
(HVAR)
High Voltage Arc Tracking Rate (HVTR) PLC 1 PLC 1 UL 746
Hot-wire Ignition (HWI) PLC 2 PLC 2 UL 746
Effective Date: 04/01/2017 ExxonMobil Page: 2 of 4
Product Datasheet
Santoprene™ 101-64
Thermoplastic Vulcanizate
Injection Typical Value (English) Typical Value (SI)
Drying Temperature 180 °F 82 °C
Drying Time 3.0 hr 3.0 hr
Suggested Max Moisture 0.080 % 0.080 %
Suggested Max Regrind 20 % 20 %
Rear Temperature 350 °F 177 °C
Middle Temperature 360 °F 182 °C
Front Temperature 360 °F 182 °C
Nozzle Temperature 370 to 430 °F 188 to 221 °C
Processing (Melt) Temp 380 to 450 °F 193 to 232 °C
Mold Temperature 50 to 125 °F 10 to 52 °C
Injection Rate Fast Fast
Back Pressure 50.0 to 100 psi 0.345 to 0.689 MPa
Screw Speed 100 to 200 rpm 100 to 200 rpm
Clamp Tonnage 3.0 to 5.0 tons/in² 41 to 69 MPa
Cushion 0.125 to 0.250 in 3.18 to 6.35 mm
Screw L/D Ratio 16.0:1.0 to 16.0:1.0 to
20.0:1.0 20.0:1.0
Screw Compression Ratio 2.0:1.0 to 2.5:1.0 2.0:1.0 to 2.5:1.0
Vent Depth 1.0E-3 in 0.025 mm
Injection Notes
Santoprene™ TPV is incompatible with acetal and PVC. For more information regarding processing and mold design, please consult our Injection
Molding Guide.
Extrusion Typical Value (English) Typical Value (SI)
Drying Temperature 180 °F 82 °C
Drying Time 3.0 hr 3.0 hr
Melt Temperature 385 °F 196 °C
Die Temperature 390 °F 199 °C
Back Pressure 725 to 2900 psi 5.00 to 20.0 MPa
Extrusion Notes
Santoprene™ TPV is incompatible with acetal and PVC. For more information regarding processing and die design, please consult our Extrusion
Molding Guide.
Aging Typical Value (English) Typical Value (SI) Test Based On
Change in Tensile Strength in Air ASTM D573
302°F (150°C), 168 hr -9.4 % -9.4 %
Change in Tensile Strength in Air ISO 188
302°F (150°C), 168 hr -9.4 % -9.4 %
Change in Ultimate Elongation in Air ASTM D573
302°F (150°C), 168 hr -7.7 % -7.7 %
Change in Tensile Strain at Break in Air ISO 188
302°F (150°C), 168 hr -7.7 % -7.7 %
Change in Durometer Hardness in Air ASTM D573
Shore A, 302°F (150°C), 168 hr 1.3 1.3
Change in Shore Hardness in Air ISO 188
Shore A, 302°F (150°C), 168 hr 1.3 1.3
Continuous Upper Temperature Resistance SAE J2236
1008 hr 275 °F 135 °C
Flammability Typical Value (English) Typical Value (SI) Test Based On
Flame Rating UL 94
0.04 in (1.0 mm) HB HB
0.06 in (1.5 mm) HB HB
0.12 in (3.0 mm) HB HB
Effective Date: 04/01/2017 ExxonMobil Page: 3 of 4
Product Datasheet
Santoprene™ 101-64
Thermoplastic Vulcanizate
Additional Information
Where applicable, test results based on fan gated, 2.0 mm injection molded plaques. Tensile strength, elongation and tensile stress are measured
across the flow direction. All ASTM and ISO methods shown may be modified by the ExxonMobil laboratory. Test methods are available upon
request. Compression set at 25% deflection. All products purchased directly from an ExxonMobil affiliate in Europe are REACH compliant. For
products not imported into Europe by ExxonMobil, customers should assess their legal responsibilities under REACH.
Legal Statement
For detailed Product Stewardship information, please contact Customer Service.
This product, including the product name, shall not be used or tested in any medical application without the prior written acknowledgement of
ExxonMobil Chemical as to the intended use. For detailed Product Stewardship information, please contact Customer Service.
Processing Statement
Desiccant drying for 3 hours at 80°C (180°F) is recommended. Santoprene™ TPV has a wide temperature processing window from 175 to 230°C
(350 to 450°F) and is incompatible with acetal and PVC. For more information, please consult our Safety Data Sheet, Injection Molding Guide and
Extrusion Guide.
Notes
Typical properties: these are not to be construed as specifications.
1Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete
Country Availability.
For additional technical, sales and order assistance: www.exxonmobilchemical.com/ContactUs
©2020 ExxonMobil. ExxonMobil, the ExxonMobil logo, the interlocking “X” device and other product or service names used herein are trademarks of
ExxonMobil, unless indicated otherwise. This document may not be distributed, displayed, copied or altered without ExxonMobil's prior written
authorization. To the extent ExxonMobil authorizes distributing, displaying and/or copying of this document, the user may do so only if the document
is unaltered and complete, including all of its headers, footers, disclaimers and other information. You may not copy this document to or reproduce it
in whole or in part on a website. ExxonMobil does not guarantee the typical (or other) values. Any data included herein is based upon analysis of
representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when
not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not
represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent
infringement, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described. The user is solely
responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability
for any loss, damage or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in
this document. This document is not an endorsement of any non-ExxonMobil product or process, and we expressly disclaim any contrary implication.
The terms “we,” “our,” "ExxonMobil Chemical" and "ExxonMobil" are each used for convenience, and may include any one or more of ExxonMobil
Chemical Company, Exxon Mobil Corporation, or any affiliate either directly or indirectly stewarded.
exxonmobilchemical.com
Effective Date: 04/01/2017 ExxonMobil Page: 4 of 4
