8050T
Descriptions
Silicon NPN transistor in a SOT-89 Plastic Package.
Features
Complementary pair with 8550T.
Applications
Power amplifier applications.
Equivalent Circuit
Pinning
1
2
3
PIN1Base PIN 2Collector PIN 3Emitter
Marking
hFE Classifications B C
Symbol D
hFE Range 85̚160 120̚200 160̚300
**
**
**
Marking HY1B HY1C HY1D
2018-05/33
REV:O
Absolute Maximum Ratings(Ta=25 Ȼ)
Parameter Symbol Rating Unit
Collector to Base Voltage VCBO 40 V
Collector to Emitter Voltage VCEO 25 V
Emitter to Base Voltage VEBO 6.0 V
Collector Current - Continuous IC 1.5 A
Collector Base - Continuous IB 0.5 A
Collector Power Dissipation PC 625 mW
Junction Temperature Tj 150 ć
Storage Temperature Range Tstg -55̚150 ć
Electrical Characteristics(Ta=25 Ȼ)
Parameter Symbol Test Conditions Min Typ Max Unit
Collector to Base Breakdown
VCBO IC=0.1mA IE=0 40 V
Voltage
Collector to Emitter Breakdown
VCEO IC=2.0mA IB=0 25 V
Voltage
Emitter to Base Breakdown Voltage VEBO IE=0.1mA IC=0 6.0 V
Collector Cut-Off Current ICBO VCB=35V IE=0 0.1 A
Emitter Base Cut-Off Current IEBO VEB=6.0V IC=0 0.1 A
hFE(1) VCE=1.0V IC=100mA 85 300
DC Current Gain hFE(2) VCE=1.0V IC=800mA 40
hFE(3) VCE=1.0V IC=5.0mA 45
Collector to Emitter Saturation
VCE(sat) IC=800mA IB=80mA 0.28 0.5 V
Voltage
Emitter to Base Saturation Voltage VBE(sat) IC=800mA IB=80mA 0.98 1.2 V
Emitter to Base Voltage VBE VCE=1.0V IC=10mA 0.66 1.0 V
Transition Frequency fT VCE=10V IC=50mA 100 190 MHz
VCB=10V IE=0
Collector Output Capacitance Cob 9.0 pF
f=1.0MHz
" " " "" " "
RATING AND CHARACTERISTICS CURVES (8050T)
" " " "" " "
Package Dimensions
" " " "" " "
Marking Instructions
HY1B
Note:
H: Company Code.
Y1: Product Type.
B hFE Classifications Symbol
**: Lot No. Code, code change with Lot No.
" " " "" " "
:KSVKXGZ[XK6XULORKLUX/88KLRU]9URJKXOTM6H,XKK
1.Preheating:25~150 ȭ, Time:60~90sec.
2.PeakTemp.:245r5ȭ, Duration:5r0.5sec.
3. Cooling Speed: 2~10ȭ/sec.
Resistance to Soldering Heat Test Conditions
Temp.:260±5 ć Time:10±1 sec
Packaging SPEC.
REEL
3
Package Type Units Dimension (unitġmm )
Units/Reel Reels/Inner Box Units/Inner Box Inner Boxes/Outer Box Units/Outer Box
Reel Inner Box Outer Box
SOT-89 1,000 7 7,000 8 56,000 7ͳ×12 180×120×180 385×257×392
" " " "" " "
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.
