Free Pattern
Terms of Use
This is a free pattern developed by me, Ana K. Ramalho -
Instagram: @furifuri.amigurumi. Its commercialization is
prohibited and its intellectual property is protected by
Brazilian Copyright Law (Law No. 9.61/1998). If you reproduce
it, please tag me in your posts so I can see your work.
Share only by sending the link to my profile, please.
Materials
Crochet hook of your choice;
Basic materials (stuffing,
scissors, tapestry needle, stitch
marker);
Acetate or cardboard;
Galvanized wire;
Craft glue;
Mix of white glue and water
(ratio 1:1) + brush;
Yarns in the colors: Gray, black,
medium brown and mustard.
FREE PATTERN | 2023 | FURIFURI AMIGURUMI
Coffee Pot Body
Attention! Do not use the mismatched increases
technique on this piece. The aligned increases will give
the hexagonal shape that we want to keep.
With the gray yarn:
1) 6sc in the MR
2) 6inc [12]
3) (1sc, 1inc) x6 [18]
4) (2sc, 1inc) x6 [24]
5) (3sc, 1inc) x6 [30]
6) (4sc, 1inc) x6 [36]
This round will be worked differently: add 1ch between
the single crochet stitches of the increases (you will do
1sc, 1ch, 1sc in the same stitch).
7) (5sc, 1inc) x6 [42]
In this next round ignore the previous chains. They serve
only to give the piece a more pointed appearance.
8) 42sc in the third loop (or bpsc)
Glue a piece of acetate or cardboard to the base of the
piece so that it will stand upright.
FREE PATTERN | 2023 | FURIFURI AMIGURUMI
9 to 14) 42sc - 6 rounds
15) (5sc, 1dim) x6 [36]
16) BLO: 36sl st
17) BLO: 36sc
18) 36sc
Make a round in BLO of 36sl st.
This round does not enter the count.
Continue:
19) FLO: 36sc (The extra round
will disappear.)
20) (5sc, 1inc) x6 [42]
21 to 23) 42sc - 3 rounds
24) (6sc, 1inc) x6 [48]
25 and 26) 48sc - 2 rounds
The next round is worked in the same
way as round 7, making 1ch between
the single crochet stitches of the
increases:
27) (7sc, 1inc) x6 [54]
Finish off and hide the yarn scraps.
Place stuffing halfway up the piece.
TIP: Adjust the stuffing with a felting needle.
FREE PATTERN | 2023 | FURIFURI AMIGURUMI
Lid
Attention! Do not use the mismatched increases
technique on this piece. The aligned increases will give
the hexagonal shape that we want to keep.
With the gray yarn:
1) 6sc in the MR
2) 6inc [12]
3) (1sc, 1inc) x6 [18]
4) (2sc, 1inc) x6 [24]
5) (3sc, 1inc) x6 [30]
6) (4sc, 1inc) x6 [36]
7) (5sc, 1inc) x6 [42]
8) (6sc, 1inc) x6 [48]
This round will be worked differently:
add 1ch between the two sc's in the increases.
9) (7sc, 1inc) x3, 1sc, 1hdc, 1dc, 3tr in the same stitch, 1dc,
1hdc, 1sc, (1inc, 7sc) x2, 1inc [56]
Finish off. Leave some yarn left over for sewing.
FREE PATTERN | 2023 | FURIFURI AMIGURUMI
Knob
With the brown yarn:
1) 5sc in the MR
2) 5inc [10]
3) 10sc in the third loop (or bpsc)
4) (3sc, 1dec) x2 [8]
5) 8sl st
Finish off and leave some yarn
left over for sewing, if you prefer.
You can also choose to glue the
knob to the lid.
Valve
With the mustard thread (I used a
thread size 10):
1) 7sc in the MR, close it 1sl st
Finish off, hide the yarn scraps. Glue
the valve to the side of the coffeepot.
FREE PATTERN | 2023 | FURIFURI AMIGURUMI
Handle
With the gray yarn:
1) 5sc in the MR
2) 5inc [10]
3) 10sc in the third loop (or bpsc)
Switch to the black yarn:
Make a round in BLO of 10sl st. This
round does not enter the count.
4) 10sc (On both sl st loops. The extra
round will disappear.)
5) (3sc, 1dec) x2 [8]
6 to 13) 8sc - 8 rounds
14) 4dec [4]
Insert a piece of wire inside the
handle. Finish by making an inverted
MR and hide the leftover yarn. Fold
the handle following the guide
picture.
Glue the handle to the coffeepot at
the height of round 27.
FREE PATTERN | 2023 | FURIFURI AMIGURUMI
Spout
With the gray yarn, make 8ch.
Skip the first one and continue:
1 and 2) 7sc
3) 3sc, 1inc, 3sc [8]
Finish off.
Position the spout in the same
direction as the handle, pin it in
the shape shown in the guide
image. Then sew.
Assembly
Position the lid on the coffeepot, align
the increases and the lid spout. Sew
only the back side, just above the
handle.
Apply the mix of white glue and water to
the inside of the lid and the inside of the
coffeepot. Wait for it to dry, and put
brown yarn inside to simulate the coffee.
FREE PATTERN | 2023 | FURIFURI AMIGURUMI
Mini Cup
Cup: Saucer:
1) 8sc in the MR 1) 6sc in the MR
2) 8inc [16] 2) 6inc [12]
3) BLO: 16sc 3) (1sc, 1inc) x6 [18]
4 to 6) 16sc - 3 rounds 4) (2sc, 1inc) x6 [24]
Make 1sl st, and go up 6 5) (3sc, 1inc) x6 [30]
Finish off and hide the
chains.
yarn leftover.
Cut the yarn and insert
into the side of the mug to
form the handle.
Place brown yarn inside to
simulate the coffee.
FREE PATTERN | 2023 | FURIFURI AMIGURUMI
It's Ready!
FREE PATTERN | 2023 | FURIFURI AMIGURUMI
