Hazel the Husky

amigurumi pattern

Created by ©YarnWave
© Banga Vaicekauskienė 2022
All rights reserved.
Hello!
This pa�ern is protected by interna�onal copyright laws and is intended
for personal use only. Transla�ng, altering instruc�ons, sharing and/or
publishing as well as selling is prohibited by any means.

If you have any trouble following the pa�ern feel free to contact me. You
can write to yarnwave@gmail.com or send a message directly from the
shop. Thank you and enjoy!
YarnWave

Selling finished items Abbreviations

You may sell any items made by following this • st - s�tch
pa�ern as long as it is not used for mass • sl - slip s�tch
produc�on. Please make a reference to and • ch - chain
credit YarnWave as the pa�ern author. • sc - single crochet
• hdc - half double crochet
If you're selling a finished product, please • dc - double crochet
make sure you follow mandatory laws, • inc - increase (2 single crochets in one s�tch)
regula�ons and product safety requirements • dec - invisible decrease (2 s�tches together
of your country. working in front loops only)
• hdcdec - invisible decrease made with hdc
s�tches
Materials needed • BLO - back loops only
• DK (3 or light worsted) weight yarn in • (..) - repeat between () number of �mes
colours white, gray and pink indicated
The exact weight of the yarn is 250m in 100g • [..] - total number of s�tches in the round or
ball (3,53Oz - 274 yds) row
• Black embroidery thread
• 2 mm (B-1) crochet hook Crochet in con�nuous rounds. Do not join, slip
• Fiberfill for stuffing s�tch or turn unless otherwise stated in the
• 8 mm safety eyes pa�ern.
• Yarn needle and scissors
• Pins and s�tch markers
Yarn info
The height of the finished toy is about 14 cm DK weight yarn used for the husky:
(5.5 in), it might vary if you use a different • Scheepjes CATONA
weight yarn or hook size. White - 105
Gray - 501
• Yarn and colours MUST-HAVE
Pink - 044

https://www.instagram.com/yarnwave/
© Banga Vaicekauskienė 2022. All rights reserved.
2
Changing the yarn Head and neck
colour • Work in rounds.
• Start with white colour yarn.
While doing a single crochet:
1. sc 6 in a magic ring [6]
Start the single crochet s�tch as normal.
2. inc 6 [12]
3. (sc 1, inc) repeat 6 �mes [18]
4. (sc 1, inc, sc 1) repeat 6 �mes [24]
5. (sc 3, inc) repeat 6 �mes [30]
6. (sc 2, inc, sc 2) repeat 6 �mes [36]
7. (sc 5, inc) repeat 6 �mes [42]
8. (sc 3, inc, sc 3) repeat 6 �mes [48]
Yarn over and pull through, leaving two loops 9. (sc 7, inc) repeat 6 �mes [54]
on your hook. 10 - 18. sc 54 [54]
19. (sc 7, dec) repeat 6 �mes [48]
20. (sc 3, dec, sc 3) repeat 6 �mes [42]
21. (sc 5, dec) repeat 6 �mes [36]
22. (sc 2, dec, sc 2) repeat 6 �mes [30]
23. sc 7, change the yarn colour to gray, sc 15,
change the yarn colour to white, sc 8 [30]
Wrap the new colour yarn around the hook. 24. sc 5, change the yarn colour to gray, sc 19,
change the yarn colour to white, sc 6 [30]
25. sc 4, change the yarn colour to gray, sc 26
[30]
26. (sc 2, inc, sc 2) repeat 6 �mes [36]
27. (sc 5, inc) repeat 6 �mes, mark the last st
with a s�tch marker [42]
28. sc 21, leave the remaining s�tches
unworked [42]
Pull the new colour through the two loops on
Fasten off and leave a long tail for sewing. The
your hook, comple�ng the single crochet
s�tch and the colour change. s�tch marker marks the centre of the face.
Insert safety eyes between rounds 13 and 14
with an interspace of 8 s�tches and stuff the
head.

Con�nue as normal with the new colour.

Eye spots (make 2)

• Use gray colour yarn.
1. ch 6 [6]
If you need to start a round with a new colour, Fasten off and leave a tail for sewing.
do these steps on the last s�tch of the
previous round.

https://www.instagram.com/yarnwave/
© Banga Vaicekauskienė 2022. All rights reserved.
3
 9. sc 8, mark the last st with a s�tch marker,
Head cover sc 22 [30]
• Work in rounds. Sl 1, fasten off and leave a yarn tail for sewing.
• Start with gray colour yarn.
1. sc 6 in a magic ring [6]
2. inc 6 [12]
3. (sc 1, inc) repeat 6 �mes [18]
4. (sc 1, inc, sc 1) repeat 6 �mes [24]
5. (sc 3, inc) repeat 6 �mes [30]
6. (sc 2, inc, sc 2) repeat 6 �mes [36]
7. (sc 5, inc) repeat 6 �mes [42]
8. (sc 3, inc, sc 3) repeat 6 �mes [48]
9. (sc 7, inc) repeat 6 �mes [54]
Ears
10 - 16. sc 54 [54] LEFT EAR
17. sc 15, 2 hdc in the next st, dc 5, 2 hdc in --- Inner part ---
the next st, sc 10, 2 hdc in the next st, dc 5, 2 • Work in rows.
hdc in the next st, sc 15 [58] • Start with pink colour yarn.
18. sc 15, hdc 1, 2 hdc in the next st, dc 6, ch 1. ch 2 [2]
1, sc 1, sl 10, sc 1, ch 1, dc 6, 2 hdc in the next 2. Start in the second ch from the hook:
st, hdc 1, sc 15 [60 + 2ch] inc [2]
Sl 1, fasten off and leave a yarn tail for sewing. 3. ch 1, turn, sc 1, inc [3]
4. ch 1, turn, sc 2, inc [4]
5. ch 1, turn, sc 3, inc [5]
6. ch 1, turn, inc, sc 4 [6]
7. ch 1, turn, sc 2, hdc 2, dc 1, 2 dc in the
next st [7]
8. ch 2, turn, dc 3, hdc 2, sc 2 [7]
9. ch 1, turn, sc 6, 3 sc in the next st, con�nue
working on the side of the ear: sc 8, 3 sc in the
corner st, con�nue on the other side of the
ear: sc 6, inc, change the yarn colour to
Snout white [28]
• Start around a founda�on chain and work in
rounds.
• Use white colour yarn.
sc
6
sc

• Leave a yarn tail at the beginning.

6,
in

1. ch 5 [5]
c

2. Start in the second ch from the hook: inc, sc 3 sc in

2, 4 sc in the next st, con�nue on the opposite 3 sc in sc 8
this stitch this stitch
side of the founda�on chain: sc 2, inc in the
last ch [12]
3. inc 2, sc 2, inc 4, sc 2, inc 2 [20]
Take a yarn needle and weave the star�ng tail
through the founda�on chain to hide the
s�tch gaps.
4. (sc 1, inc) repeat 2 �mes, sc 2, (sc 1, inc)
repeat 4 �mes, sc 2, (sc 1, inc) repeat 2 �mes
[28]
5 - 7. sc 28 [28] 10. ch 1, turn, inc, sc 19, inc, leave the
8. sc 16, hdc 1, 2 hdc in the next st, dc 8, 2 hdc remaining s�tches unworked [23]
in the next st, hdc 1 [30] Fasten off and set aside.

https://www.instagram.com/yarnwave/
© Banga Vaicekauskienė 2022. All rights reserved.
4
--- Outer part --- --- Outer part ---
• Work in rows. • Work in rows.
• Use gray colour yarn. • Use gray colour yarn.
1 - 8. Repeat the instruc�ons of the inner 1 - 8. Repeat the instruc�ons of the inner
part. part.
9. ch 1, turn, sc 6, 3 sc in the next st, con�nue 9. ch 1, turn, sc 6, 3 sc in the next st, con�nue
working on the side of the ear: sc 8, 3 sc in the working on the side of the ear: sc 6, 3 sc in the
corner st, con�nue on the other side of the corner st, con�nue on the other side of the
ear: sc 6, inc [28] ear: sc 8, inc [28]
10. ch 1, turn, inc, sc 19, inc, leave the 10. ch 1, turn, inc, sc 19, inc, leave the
remaining s�tches unworked [23] remaining s�tches unworked [23]
Take the inner ear and join these both parts in Take the inner ear and join these both parts in
the following round. the following round.
11. ch 1, turn, place inner ear on top your
work with the wrong side facing up and
crochet through both parts: sc 23 [23]
Fasten off and leave a yarn tail for sewing.
Hide all the remaining yarn tails inside.

11. ch 1, turn, place inner ear on top your

work with the wrong side facing up and
crochet through both parts: sc 23 [23]

Assemble the head

A�aching gray colour pieces on white
parts might be tricky. To make the seam
less visible you could use gray sewing
thread and a thin needle instead of the
Fasten off and leave a yarn tail for sewing. remaining yarn tail. This is a nice trick to
Hide all the remaining yarn tails inside. make the sewing less visible.

RIGHT EAR
--- Inner part ---
• Work in rows. 1. Place the eye spots around the upper part
• Start with pink colour yarn. of the eyes. Pin them in place and sew using
1 - 6. Repeat the instruc�ons of the le� ear the remaining yarn tail.
inner part.
7. ch 2, turn, 2 dc in the next st, dc 1, hdc 2,
sc 2 [7]
8. ch 1, sc 2, hdc 2, dc 3 [7]
9. ch 1, turn, sc 6, 3 sc in the next st, con�nue
working on the side of the ear: sc 6, 3 sc in the
corner st, con�nue on the other side of the
ear: sc 8, inc, change the yarn colour to
white [28]
10. ch 1, turn, inc, sc 19, inc, leave the
remaining s�tches unworked [23]
Fasten off and set aside.
https://www.instagram.com/yarnwave/
© Banga Vaicekauskienė 2022. All rights reserved.
5
2. Place the head cover on the head part with
the slip s�tch sec�on in the centre of the face.
The edge of the head cover should appear
right above the eye spots. Pin the cover in
place and sew around using the remaining
yarn tail.
sl 10 section

6. Take a strand of black embroidery thread

and embroider the nose on rounds 3 - 4 of the
snout.

3. Take a strand of white yarn and embroider

a li�le white spot in the centre of the head
cover. It should hide the edge of it and cover
the last three rounds.

7. Place the ears on the sides of the head as

shown in the pictures below. The ears should
appear on rounds 7 - 14 of the head cover and
4. Take a strand of gray yarn and embroider there should be 7 s�tches in between them.
two lines around the white spot that we've round 7
just added. rnd
14

5. Place the snout with the s�tch marker in

the middle point between safety eyes. Pin the
snout in place and sew around using the
remaining yarn tail. Stuff firmly before closing
up the seam.

https://www.instagram.com/yarnwave/
© Banga Vaicekauskienė 2022. All rights reserved.
6
 Pin them in place and sew the outer parts of 24 - 29. sc 30 [30]
the ears to the head using the remaining yarn 30. (sc 3, dec) repeat 6 �mes [24]
tails. Note that the inner parts do not need to 31. (sc 1, dec, sc 1) repeat 6 �mes [18]
be a�ached. Stuff the body firmly.
32. (sc 1, dec) repeat 6 �mes [12]
33. dec 6 [6]
Fasten off and weave the remaining yarn tail
through the front loops of the last round. Pull
�ght to close completely and weave in the
remaining tail.

Body
• Work in rounds.
• Use white colour yarn.
1. sc 6 in a magic ring [6]
2. inc 6 [12]
Body cover
3. (sc 1, inc) repeat 6 �mes [18] • Work in rows
4. (sc 1, inc, sc 1) repeat 6 �mes [24] • Use gray colour yarn.
5. (sc 3, inc) repeat 6 �mes [30] • Note that the body cover shouldn't be
6. (sc 2, inc, sc 2) repeat 6 �mes [36] crocheted very �ghtly.
7. (sc 5, inc) repeat 6 �mes [42] 1. ch 16 [16]
8 - 16. sc 42 [42] 2. Start in the second ch from the hook: (sc 2,
17. sc 15, (sc 3, dec, sc 4) repeat 3 �mes [39] inc, sc 2) repeat 3 �mes [18]
18. sc 15, (sc 5, dec, sc 1) repeat 3 �mes [36] 3. ch 1, turn, (sc 5, inc) repeat 3 �mes [21]
19. sc 15, (sc 2, dec, sc 3) repeat 3 �mes [33] 4. ch 1, turn, (sc 3, inc, sc 3) repeat 3
20. sc 15, (sc 3, dec, sc 1) repeat 3 �mes [30] �mes [24]
21. sc 15, hdc 15 [30] 5. ch 1, turn, (sc 7, inc) repeat 3 �mes [27]
22. sc 17, hdc 11, sc 2 [30] 6. ch 1, turn, (sc 4, inc, sc 4) repeat 3
23. sc 23, mark the last s�tch with a s�tch �mes [30]
marker, sc 7 [30] 7. ch 1, turn, (sc 9, inc) repeat 3 �mes [33]
Take a different colour yarn and a yarn needle. 8 - 9. ch 1, turn, sc 33 [33]
Embroider a ver�cal line right below the s�tch 10. ch 1, turn, skip 1 st, sc 32 [32]
marker to mark the centre of the belly. This 11. ch 1, turn, skip 1 st, sc 31 [31]
marking will help us later to assemble the 12. ch 1, turn, skip 1 st, sc 30 [30]
dog. Remove the s�tch marker. 13. ch 1, turn, skip 1 st, sc 29 [29]
14. ch 1, turn, skip 1 st, sc 28 [28]
15. ch 1, turn, skip 1 st, sc 27 [27]
16. ch 1, turn, skip 1 st, sc 26 [26]
17. ch 1, turn, skip 1 st, sc 25 [25]
18. ch 1, turn, skip 1 st, sc 24 [24]
19. ch 1, turn, skip 1 st, sc 23 [23]
20. ch 1, turn, skip 1 st, sc 22 [22]
21. ch 1, turn, skip 1 st, sc 21 [21]
22. ch 1, turn, skip 1 st, sc 20 [20]
YarnWave 23. ch 1, turn, skip 1 st, sc 19 [19]
Like my page on 24. ch 1, turn, skip 1 st, sc 18 [18]
Facebook!
https://www.instagram.com/yarnwave/
© Banga Vaicekauskienė 2022. All rights reserved.
7
 25. ch 1, turn, skip 1 st, sc 17 [17] 15. (sc 1, change the yarn colour to gray, sc 1,
26. ch 1, turn, skip 1 st, sc 16 [16] change the yarn colour to white) repeat 7
27. ch 1, turn, skip 1, (sc 1, dec) repeat 5 �mes, sc 1, change the yarn colour to gray,
�mes [10] sc 1 [16]
Fasten off and leave a yarn tail for sewing.

16. Con�nue in gray: sc 16 [16]

Start stuffing the leg.
17. (sc 7, inc) repeat 2 �mes [18]
18. (sc 4, inc, sc 4) repeat 2 �mes [20]
19. (sc 9, inc) repeat 2 �mes [22]
20. (sc 5, inc, sc 5) repeat 2 �mes [24]
21 - 22. sc 24 [24]
23. (sc 1, dec, sc 1) repeat 6 �mes [18]
Finish stuffing the leg. Lower half of the leg
should be stuffed firmly and the upper half
lightly.
Hind legs (make 2) 24. (sc 1, dec) repeat 6 �mes [12]
• Work in rounds. 25. dec 6 [6]
• Start with gray colour yarn. Fasten off and weave the remaining yarn tail
1. sc 6 in a magic ring [6] through the front loops of the last round. Pull
2. inc 6 [12] �ght to close completely and leave a
3. (sc 1, inc) repeat 6 �mes and change the remaining tail for sewing.
yarn colour to white [18]
Stuffed lightly
4. Work in BLO: sl 18 [18] Stuffed firmly
5. Work in BLO: (sc 1, inc, sc 1) repeat 2 �mes,
hdc 1, 2 hdc in next st, (2 dc in next st) repeat
2 �mes, 2 hdc in next st, hdc 1, (sc 1, inc, sc 1)
repeat 2 �mes [26]

6 - 7. sc 26 [26]
8. (sc 2, dec) repeat 2 �mes, hdc 1, (hdcdec)
repeat 4 �mes, hdc 1, (sc 2, dec) repeat 2
�mes [18] Front legs
9. (sc 7, dec) repeat 2 �mes [16] LEFT LEG
10 - 14. sc 16 [16] • Work in rounds.
• Start with gray colour yarn.
YarnWave 1 - 8. Repeat the instruc�ons of the hind leg.
Follow me on 9. (sc 4, dec) repeat 3 �mes [15]
Instagram!

https://www.instagram.com/yarnwave/
© Banga Vaicekauskienė 2022. All rights reserved.
8
10. sc 7, dec, sc 6 [14] RIGHT LEG
11 - 12. sc 14 [14] • Work in rounds.
13. (sc 1, change the yarn colour to gray, sc 1, • Start with gray colour yarn.
change the yarn colour to white) repeat 6 1 - 13. Repeat the instruc�ons of the le� leg.
�mes, sc 1, change the yarn colour to gray, Note that you do not need to sc 3 before
sc 1 [14] star�ng the round 14 when making the right
Sc 3 before star�ng the next round. leg.
Stuff the leg. The following part of the leg 14. ch 9, skip 5 st, sc 9 [18]
does not need stuffing. 15. Work in ch s�tches: sc 9, con�nue
14. sc 9, ch 9, skip the remaining 5 s�tches normally: sc 9 [18]
[18] 16 - 25. Repeat the instruc�ons of the le� leg.
Fasten off and finish as in the le� leg.

15. sc 9, work in ch s�tches: sc 9 [18]

Tail
• Work in rounds.
• Start with white colour yarn.
1. sc 6 in a magic ring [6]
2. (sc 1, inc, sc 1) repeat 2 �mes [8]
3. (sc 3, inc) repeat 2 �mes [10]
16 - 23. sc 18 [18]
4. (sc 2, inc, sc 2) repeat 2 �mes [12]
24. (sc 1, dec) repeat 6 �mes [12]
5. (sc 5, inc) repeat 2 �mes [14]
25. (dec) repeat 6 �mes [6]
6. (sc 3, inc, sc 3) repeat 2 �mes [16]
Fasten off and weave the remaining yarn tail
7. (sc 7, inc) repeat 2 �mes, change the yarn
through the front loops of the last round. Pull
colour to gray [18]
�ght to close completely and leave a
8. (sc 1, change the yarn colour to white, sc 1,
remaining tail for sewing. Fla�en the upper
change the yarn colour to gray) repeat 9 �mes
part of the leg as shown in a pictures below.
[18]
Stuffed firmly Con�nue in gray.
9 - 16. sc 18 [18]
Flattened 17. (sc 7, dec) repeat 2 �mes [16]
18. (sc 3, dec, sc 3) repeat 2 �mes [14]
19. (sc 5, dec) repeat 2 �mes [12]
20. (sc 2, dec, sc 2) repeat 2 �mes [10]
Fasten off and leave a tail for sewing.

https://www.instagram.com/yarnwave/
© Banga Vaicekauskienė 2022. All rights reserved.
9
Assembly.
1. Place the body cover on the back side of
the body (embroidered line marks the centre
of the belly) as shown in the pictures below.
You might need to stretch the body cover
slightly so it fits close to the body.
4.Place the front legs on the front side of the
15 stitches
13 body, below the neck seam. There should be a
stitches
gap of just a few s�tches between the legs.
Pin them in place and sew using the
remaining yarn tails.

round 31 round 5

Pin the cover in place and sew around using

the remaining yarn tail.
2. Place the head on the wider side of the
body. Dog's snout should be aligned with the
centre of the belly. The front edge of the neck
should appear on round 3 of the body. Pin the
Remove the embroidered line from the belly
head in place and sew around using the
a�er sewing.
remaining yarn tail. If needed add some
5. Place the hind legs on the sides of the body.
stuffing to the neck before closing the seam.
Pin them in place and try placing the dog on a
flat surface to check if it sits properly. Adjust
the posi�on if needed and sew using the
remaining yarn tails.

3. Take a strand of gray colour yarn and

embroider paw prints on all four legs. Li�le
toe prints should appear on hdc and dc
s�tches.
https://www.instagram.com/yarnwave/
© Banga Vaicekauskienė 2022. All rights reserved.
10
6. Place the tail on the back side of the body.
Pin the tail in place and sew around using the
remaining yarn tail.

Thank you for making

Hazel!

https://www.instagram.com/yarnwave/
© Banga Vaicekauskienė 2022. All rights reserved.
11