Dumps traffic from CAN bus and prints the TDT messages as human readable interpretation

This class writes to CAN 2.0 Packets as if they were a continuous bit-level container

The AbstractCanPacket acts as a translator between CAN Packets and MiniPackets, in addition to holding a nodeID and message priority.

As part of a research and development project at the Institute for Energy Efficient Mobility (IEEM) at Karlsruhe University of Applied Sciences (HKA), an adapter for e-bikes was developed that reads data from a CAN bus, pasrt and sends it to a smartphone via Bluetooth Low Energy (BLE).

Mongoose os app to test MCP2515 CAN library ported from Arduino.

This repo contains a hello-world and speed test sketch tested on teensy 3.6

Support for Binary Log Files (BLF) from Vector Informatik. Forked from tobylorenz/vector_blf.

Crossplatform CAN bus library

BusBridge CORE is a cross-platform C++ middleware library for embedded communication buses.

Automotive1722 is E2E application using Open1722, Redis frameworks, etc., by data communication or distribution among different or same devices using IEEE1722 L2 Layer, CAN CC/FD, DBC Signals, Redis Database.

Arduino sketch for static bending lights activation based on CAN-bus messages about steering wheel angle

DIY cheap can-bus gauge, made from a box of scraps. In a cave

DIAS-MixCAN, CAN data authentication using Bloom Filters

CAN-FD library for STM32 microcontrollers using the Arduino framework. Currently only testes on Nucleo G474RE board.

A complete pipeline for processing and decoding CAN bus logs, uploading decoded data to a Hasura GraphQL backend, and replaying CAN traffic on an ESP32 with OTA update support. Includes Python, C, and Arduino components for automation, logging, and real-time playback.

MCP2515 CAN Controller Driver for Arduino CAN Shield

C++ Driver for actuator motors using CAN bus