SANDNES CORNELIA 2409
GARN CARDIGAN _08
EN
CORNELIA CARDIGAN
#CORNELIACA RDIGAN / N O 8 / I N S T R UCT I O N : V I CTO R I A BJ EL L AN D
SKIL L L EV EL * * * * EXP ER I EN CED
SIZE SUGGESTED KNITTING NEEDLES
(XS) S-M (L) XL (2XL) 3XL Circular 4 mm and 4.5 mm
Small circular 4 mm and 4.5 mm for sleeves
MEASUREMENTS Needle sizes are only suggestions. If your knitting shows tighter
Bust: (100) 119 (129) 138 (143) 152 cm tension, use thicker needles, for looser tension use thinner needle.
Length: (50) 52 (52) 54 (54) 56 cm, or suitable
Sleeve length: 48 cm, or suitable TENSION
All measurements are for the finished garment = personal body 17 sts and 26 rnds diagram with double yarn and 4.5
measurements + movement allowance. The measurements are all mm ndls = 10 cm
according to given tension.
GSR = GERMAN SHORT ROWS
THE GARMENT After each turning always sl first st p-wise with yarn
Work cardigan from neck down and with pattern in front of work, lead yarn over right ndl and pull yarn
according to diagram. firmly at the back until 2 loops on ndl. The 2 loops
Begin to cast on sts for the back, and work back and count as 1 st. When working rows/rnds with loops
forth with turning rows to shape slanting shoulders. work loops tog to 1 st.
Cont back and forth until underarms. Knit up sts for
front parts, and dec and inc to shape neckline. Work INC RIGHT
fronts back and forth until underarms, then join back From back insert left ndl under yarn between 2 sts
and fronts to same circular ndl. Work back and forth and k the new stitch.
until full length and end with ribbing.
Knit up sts on armholes for sleeves. Work sleeves in INC LEFT
rnds according to diagram to full length, end with From front insert left ndl under yarn between 2 sts
ribbing. Work front bands and neckband. and k tbl the new stitch.
Work garment with double yarn = 1 strand Alpakka INC P1
Ull + 1 strand Alpakka Følgetråd. From back insert left ndl under yarn between 2 sts
and p the new stitch.
YARN
ALPAKKA ULL (60 % alpaca, 40 % wool, 50 g = 100 Edge sts: knit every row
m)
ALPAKKA FØLGETRÅD (100 % alpaca, 50 g = 400 BACK
m) With double yarn and 4.5 mm circular ndl cast on (70)
86 (94) 102 (102) 110 sts.
YARN REQUIRED Place marker (24) 32 (36) 40 (40) 44 sts in from each
ALPAKKA ULL side (= shoulders).
Scarlet red #4018: (9) 11 (12) 13 (14) 15 balls Work diagram A inside 1 edge st on each side, and turn
ALPAKKA FØLGETRÅD with GSR as shown in diagram. First row from WS.
Scarlet red #4018: (2) 3 (3) 3 (4) 4 balls When (6) 8 (9) 10 (10) 11 times of turnings are finished
and all sts are knitted, work diagram A further back
NOTIONS and forth inside 1 edge st on each side, until back meas
5 buttons (18) 19 (20) 21 (22) 22 cm, meas at armhole side.
Tips: Make a mark on diagram for last row worked,
EV ENTUELLE RET T EL S ER F I N N ER DU PÅ SAN D N ESG AR N .N O
3XL
3XL
A
BACK
XL (2XL)
XL (2XL)
BEGIN HERE
END HERE
(L)
(L)
S−M
S−M
and end fronts with the same row in diagram.
Next RS row inc sts for armholes as follows:
Row 1 (= RS): Work 1 edge st, inc left, work diagram A
until 1 st rem, inc right, work 1 edge st = 2 sts inc.
(XS)
(XS)
Row 2 (= WS): Work 1 edge st, work diagram A until 1
st rem, 1 edge st.
Work row 1 - 2, (4) 4 (4) 4 (6) 6 times = (78) 94 (102)
110 (114) 122 sts.
Note: For size (XS) work new sts in diagram as they
arise. For size S-M (L) XL (2XL) 3XL work p over new
sts.
Cut yarn, put back aside and work fronts.
RIGHT FRONT
With double yarn and 4.5 mm circular ndl knit up
(24) 32 (36) 40 (40) 44 sts on slanting shoulder, from
armhole towards neck.
Work diagram B for right front inside 1 edge st on each
side, first row from WS. Turn with GSR, dec and inc as
shown in diagram.
When all sts are inc, there are (34) 42 (46) 50 (50) 54
sts on ndl.
Work diagram back and forth inside 1 edge st on each
side until armhole meas approx (20) 21 (22) 23 (24)
25 (25) cm.
Note: End with same row as the back.
K ON RS, P ON WS
P ON RS, K ON WS
TRANSFER 3 STS TO EXTRA NDL IN BACK OF WORK,
K3, KNIT STS FROM EXTRA NDL
K2TOG TBL
(XS)
(XS)
YO
K2TOG
TRANSFER 3 STS TO EXTRA NDL AND HOLD IN FRONT OF WORK,
K3, KNIT STS FROM EXTRA NDL
S−M
S−M
WORK 2ND ST K TBL IN BACK OF 1ST ST, KNIT 1ST ST,
LIFT BOTH STS OFF NDL
END HERE
(L)
(L)
END HERE
KNIT 2ND ST, KNIT 1ST ST,
XL (2XL)
XL (2XL)
LIFT BOTH STS OFF NDL
3XL
3XL
EV ENTUELLE RET T EL S ER F I N N ER DU PÅ SAN D N ESG AR N .N O REPEAT
B RIGHT FRONT
RONT 38 STS RIGHT FRONT
LAST ROW
BEFORE RIBBING
REPEAT
TRANSFER 2 STS TO EXTRA NDL IN BACK OF WORK.
TRANSFER 3 STS TO EXTRA NDL IN FRONT OF WORK,,
WORK CABLE OVER 5 STS AS FOLLOWS:
WORK CABLE OVER 5 STS AS FOLLOWS:
K3, KNIT STS FROM EXTRA NDL
K2, KNIT STS FROM EXTRA NDL
3XL
XL (2XL)
(L)
S−M
(XS) END HERE
BEGIN HERE ALL SIZES BEGIN HERE ALL SIZES
B RIGHT FRONT
38 STS LEFT FRONT
B LEFT FRONT
LAST ROW
BEFORE RIBBING
REPEAT
TRANSFER 2 STS TO EXTRA NDL IN BACK OF WORK.
TRANSFER 3 STS TO EXTRA NDL IN FRONT OF WORK,,
WORK CABLE OVER 5 STS AS FOLLOWS:
WORK CABLE OVER 5 STS AS FOLLOWS:
K3, KNIT STS FROM EXTRA NDL
K2, KNIT STS FROM EXTRA NDL
3XL
XL (2XL)
(L)
S−M
END HERE (XS)
BEGIN HERE ALL SIZES BEGIN HER
EV ENTUELLE RET T EL S ER F I N N ER DU PÅ SAN D N ESG AR N .N O
Next RS row inc sts for armhole as follows: Next RS row, inc sts for armhole as follows:
Row 1 (= RS): Work 1 edge st, inc left, work diagram, Row 1 (= RS): Work 1 edge st, work diagram until 1 st
end with 1 edge st = 1 st inc. rem, inc right, work 1 edge st = 1 st inc.
Row 2 (= WS): Work 1 edge st, work diagram, end with Row 2 (= WS): Work 1 edge st, work diagram, end with
1 edge st. 1 edge st.
Work row 1 - 2, (4) 4 (4) 4 (6) 6 times = (38) 46 (50) 54 Work row 1 - 2, (4) 4 (4) 4 (6) 6 times = (38) 46 (50) 54
(56) 60 sts. (56) 60 sts.
Note: For size (XS) work new sts in diagram as they Note: For size (XS) work new sts in diagram as they
arise. For size S-M (L) XL (2XL) 3XL work p over new arise. For size S-M (L) XL (2XL) 3XL work p over new
sts. sts.
Cut yarn, put back aside and work left side front. Join fronts and back as follows:
Work 1 edge st, work diagram B over left front, end
LEFT FRONT with 1 edge st, cast on 6 new underarm sts, 1 edge st,
With double yarn and 4.5 mm circular ndl knit up (24) work diagram A over sts for back, end with 1 edge st,
32 (36) 40 (40) 44 sts on slanting shoulder, from neck cast on 6 new underarm sts, 1 edge st, work diagram B
towards armhole using the short yarn tail, for first row over right front, end with 1 edge st.
to be worked from RS.
Work diagram B for left front inside 1 edge st on each BACK AND FRONT
side. Turn with GSR, dec and inc as shown in diagram. = (166) 198 (214) 230 (238) 254 sts.
When all sts have been inc, there are (34) 42 (46) 50 Work 1 row from WS and place 6 markers as follows:
(50) 54 sts on ndl. Work 1 edge st, place marker, work 38 sts diagram B
Work diagram back and forth inside 1 edge st on each over right front, place marker, knit (4) 20 (28) 36 (40)
side until garment meas approx (21) 22 (23) 24 (25) 48 sts, place marker, work 80 sts diagram C over back,
25 cm. place marker, knit (4) 20 (28) 36 (40) 48 sts, place
Note: End with same row as the back. marker, work 38 sts diagram B over left front, place
marker, 1 edge st.
K ON RS, P ON WS
Note: Markers show beg and end for diagram. Work p
P ON RS, K ON WS
over side sts on every row.
SL 1 K−WISE, TRANSFER ST TBL BACK
Work back and forth in this order until garment
TO LEFT NDL AND K2TOG TBL.
meas (42) 44 (44) 46 (46) 48 cm, or until 8 cm before
K2TOG suitable length, meas straight down from cast on at
INC LEFT neck back.
INC RIGHT End with at least 3 rows without cable twisting.
K2TOG
Work one RS row before ribbing, with dec and inc as
follows:
YO
Work 1 edge st, work last row for diagram B over left
K2TOG TBL
front, work (1) 9 (13) 17 (19) 23 p sts, inc p1, work
TRANSFER 3 STS TO EXYTRA NDL IN BACK OF WORK,
p2, inc p1, work p until next marker, work last row of
K3, KNIT STS FROM EXTRA NDL
diagram C, work (1) 9 (13) 17 (19) 23 p sts, inc p1, work
TRANSFER 3 STS TO EXTRA NDL IN FRONT OF WORK, p2, inc p1, work p to next marker, work last row of
K3, KNIT STS FROM EXTRA NDL
diagram B over right front, 1 edge st = (148) 180 (196)
CAST ON 1 NEW STITCH 212 (220) 236 sts.
P2TOG Change to 4 mm circular ndl and work 8 cm ribbing
EV ENTUELLE RET T EL S ER F I N N ER DU PÅ SAN D N ESG AR N .N O
back and forth as follows: FOR SIZE (L) XL (2XL) 3XL
(First row = WS): Work 1 edge st, k2, *p2, k2*, rep from Change to 4 mm circular ndl and work 12 cm ribbing
*-* to end of row, end with 1 edge st. as follows:
Work Italian cast-off. Work p1, *k2, p2*, rep from *-* in the rnd, end with p1.
Tips: By use of an extra ndl move sts to be arranged as ALL SIZES
k1, p1 on ndl and work regular Italian cast-off. Work Italian cast-off.
Tips: By use of an extra ndl move sts to be arranged as
SLEEVES k1, p1 on ndl, and work regular Italian cast-off.
Beg at middle underarm. With double yarn and small
4.5 mm circular ndl knit up 1 st in every st on armhole LEFT FRONT BAND
edge. With double yarn and 4 mm circular ndl knit up 1 st in
Place marker at middle underarm = beg of rnd. every st/row, but miss every 5th st/row = approx (80)
Knit 1 rnd, at the same time adjust number of sts to 84 (84) 88 (88) 92 sts.
(80) 80 (84) 84 (94) 94. Number of sts a multiple of 4.
Cont in rnds according to diagram C as follows: Work 4 cm ribbing back and forth as follows:
Work (10) 10 (12) 12 (17) 17 p sts, work 60 sts diagram (First row = WS): Work 1 edge st, p2, *k2, p2*, rep
C, work p to beg of rnd. from*-* to end of row, end with 1 edge st.
Cont in rnds in this order until sleeve meas 36 cm, or Work Italian cast-off as for back/front.
until 12 cm before suitable length.
K ON RS, P ON WS
End with at least 3 rnds without cable twisting.
FOR SIZE (XS) S-M (L) XL P ON RS, K ON WS
Work 1 rnd with dec and inc before ribbing as follows: TRANSFER 3 STS TO EXTRA NDL IN BACK OF WORK,
Work p1, inc p1, work p until marker, work last rnd of K3, KNIT STS FROM EXTRA NDL
diagram C until marker, work p until 1 st before beg of K2TOG TBL
rnd, inc p1, p1 = (76) 76 (80) 80 sts. YO
FOR SIZE (2XL) 3XL K2TOG
Work 1 rnd with dec and inc before the ribbing as
TRANSFER 3 STS TO EXTRA NDL AND HOLD IN FRONT OF WORK,
follows: K3, KNIT STS FROM EXTRA NDL
Work p until marker, work last rnd of diagram C, work
WORK 2ND ST K TBL IN BACK OF 1ST ST, KNIT 1ST ST,
p until marker, work last rnd of diagram C, work p
LIFT BOTH STS OF NDL
until beg of rnd = (88) 88 sts.
KNIT 2ND ST, KNIT 1ST ST,
FOR SIZE (XS) S-M
LIFT BOTH STS OFF NDL
Change to small 4 mm circular ndl and work 12 cm
ribbing in rnds as follows: P2TOG
Work k1, *p2, k2*, rep from *-*, end with k1. WORK K1 AND K1 TBL IN SAME STITCH
C BACK AND SLEEVES
LAST ROW/RND
BEFORE RIBBING
REPEAT
END HERE SLEEVE BEGIN HERE SLEEVE
END HERE BACK BEGIN HERE BACK
EV ENTUELLE RET T EL S ER F I N N ER DU PÅ SAN D N ESG AR N .N O
RIGHT FRONT BAND
Knit up sts in same manner as for left front band, but
place markers for 5 buttonholes as follows:
Place marker approx 2 cm from lower edge of ribbing,
between 2 p sts. The upper buttonhole will be worked
on neckband. This is done later. Place markers for 3
buttonholes evenly spaced between the upper and
lower, and always between 2 p sts.
Work in same manner as left front band, but work
buttonhole by markers when band meas 2 cm as
follows:
Row 1 (= RS): Work 1 edge st, *work ribbing until 2 sts
before marker, work k2tog tbl, 1 yo, p1*, rep from *-* a
total of 4 times, work ribbing to end of row, end with
1 edge st.
Row 2 (= WS): Work 1 edge st, work ribbing to end of
row, 1 edge st.
NECKBAND
With double yarn and 4 mm circular ndl knit up 1 st in
every st/row on neck edge = approx 80 sts.
Number of sts a multiple of 4.
Place marker for 5th buttonhole in line with the
others, and between 2 p sts.
Work 4 cm ribbing back and forth as follows:
(First row = WS): Work 1 edge st, p2, *k2, p2*, rep from
*-* to end of row, end with 1 edge st.
Note: Work buttonhole when band meas 2 cm.
Work Italian cast-off as for front bands.
EV ENTUELLE RET T EL S ER F I N N ER DU PÅ SAN D N ESG AR N .N O
