MJE15028, MJE15030 (NPN)

MJE15029, MJE15031 (PNP)

Preferred Device

Complementary Silicon
Plastic Power Transistors
These devices are designed for use as high−frequency drivers in
audio amplifiers. http://onsemi.com
Features
• DC Current Gain Specified to 4.0 Amperes 8 AMPERE
hFE = 40 (Min) @ IC = 3.0 Adc POWER TRANSISTORS
= 20 (Min) @ IC = 4.0 Adc COMPLEMENTARY SILICON
• Collector−Emitter Sustaining Voltage − 120−150 VOLTS, 50 WATTS
VCEO(sus) = 120 Vdc (Min); MJE15028, MJE15029
= 150 Vdc (Min); MJE15030, MJE15031
• High Current Gain − Bandwidth Product
fT = 30 MHz (Min) @ IC = 500 mAdc
• TO−220AB Compact Package
• Pb−Free Packages are Available*

MAXIMUM RATINGS
Rating Symbol Value Unit TO−220AB
CASE 221A−09
Collector−Emitter Voltage VCEO Vdc 1 STYLE 1
MJE15028, MJE15029 120 2
3
MJE15030, MJE15031 150
Collector−Base Voltage VCB Vdc
MJE15028, MJE15029 120
MJE15030, MJE15031 150 MARKING DIAGRAM
Emitter−Base Voltage VEB 5.0 Vdc
Collector Current − Continuous IC 8.0 Adc
− Peak ICM 16
Base Current IB 2.0 Adc
Total Device Dissipation @ TC = 25_C PD 50 W
Derate above 25°C 0.40 W/_C
Total Device Dissipation @ TC = 25_C PD 2.0 W MJE150xxG
Derate above 25°C 0.016 W/_C
AY WW
Operating and Storage Junction TJ, Tstg −65 to _C
Temperature Range +150

THERMAL CHARACTERISTICS
Characteristics Symbol Max Unit
Thermal Resistance, Junction−to−Case RqJC 2.5 _C/W
MJE150xx = Device Code
Thermal Resistance, Junction−to−Ambient RqJA 62.5 _C/W
x = 28, 29, 30, or 31
Maximum ratings are those values beyond which device damage can occur. G = Pb−Free Package
Maximum ratings applied to the device are individual stress limit values (not A = Assembly Location
normal operating conditions) and are not valid simultaneously. If these limits are
Y = Year
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected. WW = Work Week

ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 5 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques Preferred devices are recommended choices for future use
Reference Manual, SOLDERRM/D. and best overall value.

© Semiconductor Components Industries, LLC, 2006 1 Publication Order Number:

February, 2006 − Rev. 4 MJE15028/D
 MJE15028, MJE15030 (NPN) MJE15029, MJE15031 (PNP)

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted)

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Characteristic Symbol Min Max Unit
OFF CHARACTERISTICS
ÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎ ÎÎÎÎ
Collector−Emitter Sustaining Voltage (Note 1) VCEO(sus) Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ
ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ
(IC = 10 mAdc, IB = 0) MJE15028, MJE15029 120 −
MJE15030, MJE15031 150 −

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎ
Collector Cutoff Current
ÎÎÎ ÎÎÎÎ ICEO mAdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎ
(VCE = 120 Vdc, IB = 0)

ÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
(VCE = 150 Vdc, IB = 0)
ÎÎÎ
ÎÎÎ
ÎÎÎÎ ÎÎÎÎ
ÎÎÎÎ
MJE15028, MJE15029
MJE15030, MJE15031
−
−
0.1
0.1

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎ ÎÎÎÎ
Collector Cutoff Current ICBO mAdc
(VCB = 120 Vdc, IE = 0) MJE15028, MJE15029 − 10

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ ÎÎÎ
ÎÎÎÎ ÎÎÎÎ
(VCB = 150 Vdc, IE = 0) MJE15030, MJE15031 − 10

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
Emitter Cutoff Current

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ
ÎÎÎ ÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎ
(VBE = 5.0 Vdc, IC = 0)

ÎÎÎ ÎÎÎÎ
IEBO − 10 mAdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎ ÎÎÎÎ
ON CHARACTERISTICS (Note 1)

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎ
DC Current Gain hFE −
(IC = 0.1 Adc, VCE = 2.0 Vdc) 40 −

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎ
(IC = 2.0 Adc, VCE = 2.0 Vdc) 40 −
(IC = 3.0 Adc, VCE = 2.0 Vdc)

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎ
40 −
(IC = 4.0 Adc, VCE = 2.0 Vdc) 20 −

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎÎ
DC Current Gain Linearity

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ hFE Typ

ÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎÎ
(VCE From 2.0 V to 20 V, IC From 0.1 A to 3 A) 2
(NPN to PNP) 3

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ
ÎÎÎ
ÎÎÎÎ ÎÎÎÎ
Collector−Emitter Saturation Voltage

ÎÎÎÎ
(IC = 1.0 Adc, IB = 0.1 Adc)
VCE(sat) − 0.5 Vdc

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎ ÎÎÎÎ
Base−Emitter On Voltage VBE(on) − 1.0 Vdc
(IC = 1.0 Adc, VCE = 2.0 Vdc)

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎ ÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎ ÎÎÎÎ
DYNAMIC CHARACTERISTICS
Current Gain − Bandwidth Product (Note 2) fT 30 − MHz

ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎ
(IC = 500 mAdc, VCE = 10 Vdc, ftest = 10 MHz)
1. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2.0%.
2. fT = ⎪hfe⎪• ftest.

TA TC
PD, POWER DISSIPATION (WATTS)

3.0 60

2.0 40

TC

1.0 20 TA

0 0
0 20 40 60 80 100 120 140 160
T, TEMPERATURE (°C)

Figure 1. Power Derating

http://onsemi.com
2
 MJE15028, MJE15030 (NPN) MJE15029, MJE15031 (PNP)

1.0
0.7
D = 0.5
0.5
RESISTANCE (NORMALIZED)
r(t), TRANSIENT THERMAL

0.3
0.2
0.2
0.1
0.1 P(pk)
ZqJC(t) = r(t) RqJC
0.07 0.05 RqJC = 1.56°C/W MAX
0.05 D CURVES APPLY FOR POWER
0.02
PULSE TRAIN SHOWN t1
0.03
READ TIME AT t1 t2
0.02 0.01 TJ(pk) − TC = P(pk) ZqJC(t)
SINGLE PULSE DUTY CYCLE, D = t1/t2
0.01
0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 500 1.0 k
t, TIME (ms)

Figure 2. Thermal Response

20 There are two limitations on the power handling ability of

16
10 100 ms a transistor: average junction temperature and second
IC, COLLECTOR CURRENT (AMP)

breakdown. Safe operating area curves indicate IC − VCE

5ms limits of the transistor that must be observed for reliable
dc operation, i.e., the transistor must not be subjected to greater
1.0 dissipation then the curves indicate.
BONDING WIRE LIMITED The data of Figures 3 and 4 is based on T J(pk) = 150_C;
THERMALLY LIMITED TC is variable depending on conditions. Second breakdown
SECOND BREAKDOWN pulse limits are valid for duty cycles to 10% provided TJ(pk)
0.1 LIMITED @ TC = 25°C < 150_C. TJ(pk) may be calculated from the data in Figure 2.
MJE15028
MJE15029 At high case temperatures, thermal limitations will reduce
MJE15030 the power that can be handled to values less than the
MJE15031
0.02 limitations imposed by second breakdown.
2.0 5.0 10 20 50 120 150
VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS)

Figure 3. Forward Bias Safe Operating Area

8.0 1000

Cib (NPN)
IC, COLLECTOR CURRENT (AMP)

500
Cib (PNP)
C, CAPACITANCE (pF)

5.0 200

IC/IB = 10
TC = 25°C 100 Cob (PNP)
3.0 50
VBE(off) = 9 V
2.0 5V 30 Cob (NPN)
3V 20
1.0
1.5 V
0 0V 10
0 100 110 120 130 140 150 1.5 3.0 5.0 7.0 10 30 50 100 150
VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS)

Figure 4. Reverse−Bias Switching Figure 5. Capacitances

Safe Operating Area

http://onsemi.com
3
 MJE15028, MJE15030 (NPN) MJE15029, MJE15031 (PNP)

fT, CURRENT GAIN−BANDWIDTH PRODUCT (MHz)

100 100
90 (PNP)
hfe , SMALL SIGNAL CURRENT GAIN

50
(NPN)
30 60
VCE = 10 V 50
20 IC = 0.5 A PNP
TC = 25°C
NPN
10
20
10
5.0 0
0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 0.1 0.2 0.5 1.0 2.0 5.0 10
f, FREQUENCY (MHz) IC, COLLECTOR CURRENT (AMP)

Figure 6. Small−Signal Current Gain Figure 7. Current Gain−Bandwidth Product

NPN — MJE15028 MJE15030 PNP — MJE15029 MJE15031

1K 1K
VCE = 2.0 V VCE = 2 V
500 500
hFE , DC CURRENT GAIN

hFE , DC CURRENT GAIN

TJ = 150°C TJ = 150°C
200 200
150
TJ = 25°C TJ = 25°C
100 100
70 TJ = −55°C
50 TJ = −55°C 50
30
20 20

10 10
0.1 0.2 0.5 1.0 2.0 5.0 10 0.1 0.2 0.5 1.0 2.0 5.0 10
IC, COLLECTOR CURRENT (AMP) IC, COLLECTOR CURRENT (AMP)
Figure 8. DC Current Gain

NPN PNP

TJ = 25°C 1.8 TJ = 25°C

1.6
V, VOLTAGE (VOLTS)

V, VOLTAGE (VOLTS)

1.4
1.2
1.0 1.0
VBE(sat) @ IC/IB = 10 0.8 VBE(sat) @ IC/IB = 10

0.6 VBE(on) @ VCE = 2.0 V VBE(on) @ VCE = 2.0 V

0.4
VCE(sat) = IC/IB = 20
0.2 VCE(sat) = IC/IB = 20
IC/IB = 10 IC/IB = 10
0
0.1 0.2 0.5 1.0 2.0 5.0 10 0.1 0.2 0.5 1.0 2.0 5.0 10
IC, COLLECTOR CURRENT (AMP) IC, COLLECTOR CURRENT (AMP)
Figure 9. “On” Voltage

http://onsemi.com
4
 MJE15028, MJE15030 (NPN) MJE15029, MJE15031 (PNP)

1.0 10
VCC = 80 V VCC = 80 V
IC/IB = 10 5.0 IC/IB = 10, IB1 = IB2
0.5
TJ = 25°C ts (NPN) TJ = 25°C
3.0
0.2 tr (PNP) td (NPN, PNP) 2.0
t, TIME (s)

t, TIME (s)
μ

μ
ts (PNP)
0.1 1.0

0.05 0.5 tf (PNP)

0.03 tr (NPN)
0.02 0.2 tf (NPN)

0.01 0.1
0.1 0.2 0.5 1.0 2.0 5.0 10 0.1 0.2 0.3 0.5 2.0 5.0 10
IC, COLLECTOR CURRENT (AMP) IC, COLLECTOR CURRENT (AMP)

Figure 10. Turn−On Times Figure 11. Turn−Off Times

ORDERING INFORMATION
Device Package Shipping
MJE15028 TO−220 50 Units / Rail
MJE15028G TO−220 50 Units / Rail
(Pb−Free)
MJE15029 TO−220 50 Units / Rail
MJE15029G TO−220 50 Units / Rail
(Pb−Free)
MJE15030 TO−220 50 Units / Rail
MJE15030G TO−220 50 Units / Rail
(Pb−Free)
MJE15031 TO−220 50 Units / Rail
MJE15031G TO−220 50 Units / Rail
(Pb−Free)

http://onsemi.com
5
 MJE15028, MJE15030 (NPN) MJE15029, MJE15031 (PNP)

PACKAGE DIMENSIONS

TO−220AB
CASE 221A−09
ISSUE AA

NOTES:
SEATING
−T− PLANE 1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
B F C 2. CONTROLLING DIMENSION: INCH.
T 3. DIMENSION Z DEFINES A ZONE WHERE ALL
S BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
4
INCHES MILLIMETERS
Q A DIM MIN MAX MIN MAX
A 0.570 0.620 14.48 15.75
1 2 3 B 0.380 0.405 9.66 10.28
U
C 0.160 0.190 4.07 4.82
H D 0.025 0.035 0.64 0.88
F 0.142 0.147 3.61 3.73
K G 0.095 0.105 2.42 2.66
Z H 0.110 0.155 2.80 3.93
J 0.018 0.025 0.46 0.64
K 0.500 0.562 12.70 14.27
L R L 0.045 0.060 1.15 1.52
N 0.190 0.210 4.83 5.33
V J Q 0.100 0.120 2.54 3.04
R 0.080 0.110 2.04 2.79
G S 0.045 0.055 1.15 1.39
T 0.235 0.255 5.97 6.47
D U 0.000 0.050 0.00 1.27
N V 0.045 −−− 1.15 −−−
Z −−− 0.080 −−− 2.04

STYLE 1:
PIN 1. BASE
2. COLLECTOR
3. EMITTER
4. COLLECTOR

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free ON Semiconductor Website: http://onsemi.com
Literature Distribution Center for ON Semiconductor USA/Canada
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Order Literature: http://www.onsemi.com/litorder
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 For additional information, please contact your
Email: orderlit@onsemi.com Phone: 81−3−5773−3850 local Sales Representative.

http://onsemi.com MJE15028/D
6