Silva Fennica vol. 51 no. 2 | 2017

In the present study, the impact of geographical isolation and habitat conditions on genetic diversity and sexual reproduction was tested in four relict populations of dwarf birch Betula nana L. in Poland and Belarus. Amplified fragment length polymorphism (AFLP) method revealed that the endangered central European stands were not genetically extirpated compared with the widespread localities from Finland and Russia, which can result from infrequent outcrossing events in long-living clonal populations. However, genetic clustering methods indicated significant differentiation of the Polish populations because of their small sizes and long-term geographical isolation. Considerable numbers of empty seeds were observed in both relict and central locations, although fully developed seeds germinated better in widespread populations. Analysis of groundwater chemical parameters indicated that two relict populations were significantly different from the remaining samples with respect to pH, electrical conductivity and concentrations of phosphorus ions, which can also influence the efficiency of sexual reproduction. In the light of results obtained it seems that endangered B. nana localities are relatively stable.

• Jadwiszczak, Institute of Biology, University of Białystok, Ciołkowskiego 1J, 15-245 Białystok, Poland http://orcid.org/0000-0002-9345-8891 E-mail: jadwiszczak2010@gmail.com
• Kłosowski, Department of Environment Protection and Modelling, The Jan Kochanowski University, Świętokrzyska 15, 25-406 Kielce, Poland E-mail: stanislaw.klosowski@ujk.kielce.pl
• Zalewska, Faculty of Pharmacy, Medical University of Białystok, Mickiewicza 2a, 15-222 Białystok, Poland E-mail: iwonazalewska1988@gmail.com
• Banaszek, Institute of Biology, University of Białystok, Ciołkowskiego 1J, 15-245 Białystok, Poland E-mail: banaszek@uwb.edu.pl
• Chrzanowska, Institute of Biology, University of Białystok, Ciołkowskiego 1J, 15-245 Białystok, Poland E-mail: maga.chrzanowska@gmail.com

Exploring the possibility to produce nation-wide forest attribute maps using stereophotogrammetry of aerial images, the national terrain model and data from the National Forest Inventory (NFI). The study areas are four image acquisition blocks in mid- and south Sweden. Regression models were developed and applied to 12.5 m × 12.5 m raster cells for each block and validation was done with an independent dataset of forest stands. Model performance was compared for eight different forest types separately and the accuracies between forest types clearly differs for both image- and LiDAR methods, but between methods the difference in accuracy is small at plot level. At stand level, the root mean square error in percent of the mean (RMSE%) were ranging: from 7.7% to 10.5% for mean height; from 12.0% to 17.8% for mean diameter; from 21.8% to 22.8% for stem volume; and from 17.7% to 21.1% for basal area. This study clearly shows that aerial images from the national image program together with field sample plots from the NFI can be used for large area forest attribute mapping.

• Bohlin, Department of Forest Resource Management, Swedish University of Agricultural Sciences, S-901 35 Umeå, Sweden http://orcid.org/0000-0002-3318-5967 E-mail: jonas.bohlin@slu.se
• Bohlin, Department of Forest Resource Management, Swedish University of Agricultural Sciences, S-901 35 Umeå, Sweden http://orcid.org/0000-0003-1224-6684 E-mail: inka.bohlin@slu.se
• Jonzén, Department of Forest Resource Management, Swedish University of Agricultural Sciences, S-901 35 Umeå, Sweden E-mail: jonas.jonzen@slu.se
• Nilsson, Department of Forest Resource Management, Swedish University of Agricultural Sciences, S-901 35 Umeå, Sweden http://orcid.org/0000-0001-7394-6305 E-mail: mats.nilsson@slu.se

The ongoing climate change may have a distinct effect on Norway spruce growth, one of the most important tree species in European forest management. Therefore, the understanding and assessment of climate-growth relationship can help to reveal relevant patterns in temporal variability that may result in lower tree vitality and decline. The main objective of our study was to evaluate the long-term climate-growth variability of Norway spruce in south-eastern Norway, at the northern edge of the temperate zone. We sampled in total 270 dominant and co-dominant trees from 18 plots in south-eastern Norway. We analysed stem cores and evaluated crown condition parameters to assess the retrospective tree growth and vitality. Despite considerable differences in the crown parameters, high similarity among tree-ring width (TRW) series allowed compiling the regional tree-ring width chronology. Correlations between TRW and climate parameters showed temporal instability in their relationship during the period 1915–2012. While we did not detect any significant relationships between TRW and climate parameters in the first half of the study period (1915–1963), a significant correlation between TRW and spring precipitation was observed for the period 1964–2012. This shift appeared concurrent with temperatures reaching above-average values compared to the average of the climate normal period 1961–1990.

• Čermák, Faculty of Forestry and Wood Technology, Mendel University in Brno, Zemědělská 3, 613 00 Brno, Czech Republic E-mail: cermacek@mendelu.cz
• Rybníček, Faculty of Forestry and Wood Technology, Mendel University in Brno, Zemědělská 3, 613 00 Brno, Czech Republic; Global Change Research Institute, The Czech Academy of Sciences, Bělidla 986/4a, 603 00 Brno, Czech Republic E-mail: michalryb@post.cz
• Žid, Faculty of Forestry and Wood Technology, Mendel University in Brno, Zemědělská 3, 613 00 Brno, Czech Republic E-mail: tom.z@centrum.cz
• Andreassen, Norwegian Institute of Bioeconomy Research (NIBIO), P.O. Box 115, NO-1431 Ås, Norway E-mail: Kjell.Andressen@nibio.no
• Børja, Norwegian Institute of Bioeconomy Research (NIBIO), P.O. Box 115, NO-1431 Ås, Norway E-mail: Isabella.Borja@nibio.no
• Kolář, Faculty of Forestry and Wood Technology, Mendel University in Brno, Zemědělská 3, 613 00 Brno, Czech Republic; Global Change Research Institute, The Czech Academy of Sciences, Bělidla 986/4a, 603 00 Brno, Czech Republic E-mail: koldatom@gmail.com

Polymorphisms at a set of eighteen nuclear (nSSR) and chloroplast (cpSSR) microsatellite loci were investigated in sixteen populations of Scots pine (Pinus sylvestris L.) derived from the provenance trial experiment and representative of the species distribution range and climatic zones in Poland. The patterns of genetic variation were compared to the reference samples from the species distribution in Europe and Asia. A similar level of genetic variation and no evidence of population structure was found among the Polish stands. They showed genetic similarity and homogenous patterns of allelic frequency spectra compared to the Northern European populations. Those populations were genetically divergent compared to the marginal populations from Turkey, Spain and Scotland. The population structure patterns reflect the phylogeography of the species and the divergence of populations that most likely do not share recent history. As the analysed provenance trial populations from Poland are diverged in phenotypic traits but are genetically similar, they could be used to test for selection at genomic regions that influence variation in quantitative traits.

• Hebda, University of Agriculture in Krakow, Faculty of Forestry, Institute of Forest Ecology and Silviculture, Department of Genetics and Forest Tree Breeding, 29 Listopada 46, 31-425 Kraków, Poland http://orcid.org/0000-0002-3149-8644 E-mail: ana.hebda@gmail.com
• Wójkiewicz, Institute of Dendrology, Polish Academy of Sciences, Parkowa 5, 62-035 Kórnik, Poland E-mail: bwojkiew@man.poznan.pl
• Wachowiak, Institute of Dendrology, Polish Academy of Sciences, Parkowa 5, 62-035 Kórnik, Poland; Institute of Environmental Biology, Faculty of Biology, Adam Mickiewicz University, Umultowska 89, 61-614 Poznań, Poland E-mail: witoldw@man.poznan.pl

Pruning was performed at midsummer in two genetically homogenous and managed planted silver birch stands in southern Sweden – one aged 9 and one aged 10 years. Wood defects were analysed 10 years thereafter, using the five uppermost twigs of the stems up to a height of 30 dm. The number of trees examined at each site was around 70, of which half were pruned. The main findings were that: a) compared to unpruned trees, pruned trees produced more defect-free wood outside the knots; b) most wood defects were found inside the knots; and c) wood defects like rot and bark ingrowth were similar for pruned and unpruned trees, while discolouration was marginally higher for pruned trees inside knots but similar outside knots. Overall, the results confirm previous findings that pruned birch trees will provide butt logs with higher value than unpruned trees.

• Stener, The Forestry Research Institute of Sweden, Ekebo 2250, 268 90 Svalöv, Sweden E-mail: lars-goran.stener@skogforsk.se
• Rytter, The Forestry Research Institute of Sweden, Ekebo 2250, 268 90 Svalöv, Sweden E-mail: lars.rytter@skogforsk.se
• Jansson, The Forestry Research Institute of Sweden, Uppsala Science Park, 751 83 Uppsala, Sweden E-mail: gunnar.jansson@skogforsk.se

Ungulate browsing results in important damages on the forests, affecting their structure, composition and development. In the present paper, we examine the occurrence of browsing damage in Norwegian forests, using data provided by the National Forest Inventory along several consecutive measurements (entailing the period 1995–2014). A portfolio of variables describing the stand, site and silvicultural treatments are analyzed using classification trees to retrieve combinations related to browsing damage. Our results indicate that the most vulnerable forest stands are young with densities below 1400 trees ha^–1 and dominated by birch, pine or mixed species. In addition, stand diversity and previous treatments (e.g. thinnings) increase the damage occurrence and other variables, like stand size, could play a role on forest susceptibility to browsing occurrence although the latter is based on weaker evidence. The methods and results of our study can be applied to implement management measures aiming at reducing the browsing damages of forests.

• Díaz-Yáñez, School of Forest Sciences, University of Eastern Finland, PO Box 111, 80101 Joensuu, Finland http://orcid.org/0000-0003-3829-5759 E-mail: olalla.diaz@gmail.com
• Mola-Yudego, Norwegian Institute of Bioenergy Research, P.O. Box, 115, 1431 Ås, Norway; School of Forest Sciences, University of Eastern Finland, PO Box 111, 80101 Joensuu, Finland http://orcid.org/0000-0003-0286-0170 E-mail: blas.mola@uef.fi
• González-Olabarria, Forest Sciences Centre of Catalonia (CTFC-CEMFOR), Ctra. de St. Llorenç de Morunys, km 2, 25280 Solsona, Spain http://orcid.org/0000-0002-5040-712X E-mail: jr.gonzalez@ctfc.es

Oceanic archipelagos provide an important platform from which to evaluate the effects of isolation and fragmentation on the genetic structure of species. As a result of oceanic isolation, such species usually show lower levels of genetic diversity and higher genetic differentiation than their mainland congeners. However, this is not necessarily the case for long distance dispersal species, whose genetic structure is not strictly defined by population isolation. We assessed the level and distribution of genetic diversity among Canarian populations of Juniperus turbinata in order to evaluate the influence of population isolation on its genetic structure. Using Amplified Fragment Length Polymorphism markers, we analyzed molecular diversity among 175 individuals from five populations occurring across the Canary Island and three Moroccan populations. Principal Coordinate Analysis, neighbor joining clustering, AMOVA and Bayesian-based analysis were applied to examine population structure. Despite the documented habitat loss and decline in Canarian populations, Amplified Fragment Length Polymorphism markers revealed levels of intra-population genetic diversity that were similar to those from mainland populations, and low levels of genetic differentiation. Bayesian analysis of population structure showed three main clusters, one comprising El Hierro population and a few individuals from several islands, a second cluster that grouped the remaining Canarian populations together, and a third cluster grouping Moroccan populations. Our results suggest that the main force driving the genetic structure of Canarian populations of J. turbinata is its capacity for long distance dispersal.

• Jimenez, Departamento de Biología Vegetal (Botánica), Universidad de Murcia, Campus de Espinardo s/n, E-30100 Murcia, Spain E-mail: fjimenez@um.es
• Sánchez-Gómez, Departamento de Biología Vegetal (Botánica), Universidad de Murcia, Campus de Espinardo s/n, E-30100 Murcia, Spain http://orcid.org/0000-0001-6754-1512 E-mail: psgomez@um.es
• Cánovas, Departamento de Biología Vegetal (Botánica), Universidad de Murcia, Campus de Espinardo s/n, E-30100 Murcia, Spain E-mail: joseluis.canovas@um.es
• Hensen,  Institut für Biologie, Martin-Luther Universitat, 06099 Halle, Germany E-mail: isabell.hensen@botanik.uni-halle.de
• Aouissat, Centre Universitaire Salhi Ahmed Naama, BP 66, Naâma, Algérie E-mail: aouissatm@yahoo.fr

The purpose of this research is to establish time consumption and productivity when using Husqvarna 365 chainsaw for resinous tree felling in mountainous regions. The research was conducted in the Romanian Southern Carpathians, in two mixed spruce (Picea abies (L.) H. Karst.) and fir (Abies alba Mill.) tree stands (S1 and S2). Only one team of workers, made up of a feller and an assistant, was used in the felling operation. This was divided into nine specific stages for which work times were measured. Work time structure used here includes WP – workplace time (PW – productive work time; SW – supportive work time, NT – non-work time) and NW – non-workplace time. The results indicated a productivity of 10.138 m³ h^–1 (4.55 tree h^–1) in S1 and of 11.374 m³ h^–1 (4.33 tree h^–1) in S2. Work time structure was WP 88.61% (PW 19.59%; SW 33.88%; NT 35.14%) and NW 11.39% in S1 and WP 83.77% (PW 17.66%; SW 30.73%; NT 35.38%) and NW 16.23% in S2. The results obtained showed that the power function best describes the relationship between productivity expressed by tree h^–1 and breast height diameter (dbh) (R2 = 0.89 in S1 and R2 = 0.94 in S2). When productivity is expressed by m³ h^–1 the results obtained in the case of power, exponential and linear functions are comparable (R2 = 0.65 to 0.67 in S1 and R2 = 0.81 to 0.92 in S2). Productivity is also influenced by stump diameter and the distance between trees. Their influence on productivity was emphasized by linear regression equations.

• Campu, Transilvania University of Braşov, Faculty of Silviculture and Forest Engineering, Department of Forest Engineering, Forest Management Planning and Terrestrial Measurements, Şirul Beethoven no. 1, 500123, Braşov, Romania E-mail: vasile.campu@unitbv.ro
• Ciubotaru, Transilvania University of Braşov, Faculty of Silviculture and Forest Engineering, Department of Forest Engineering, Forest Management Planning and Terrestrial Measurements, Şirul Beethoven no. 1, 500123, Braşov, Romania E-mail: ciuboarc@unitbv.ro

Although controlled release fertilizer (CRF) with single and multiple-layer coatings are extensively used in tree seedlings, studies that compare the impact of CRF type and application rate on seedling growth, nutrient storage, and, most importantly, outplanting performance, are lacking. In the current study, container-grown Pinus tabulaeformis Carr. (Chinese pine) seedlings were fertilized with commercial CRF with either one or multiple coating layers with equivalent formulation and longevity, at six rates ranging from 40 to 240 mg N seedling^–1. Seedlings were sampled for dry mass, non-structural carbohydrate (NSC) content, and mineral nutrient status at the end of the growing season in the nursery, and subsequently outplanted for one season. Compared to Chinese pine seedlings fertilized with single-layer CRF treatments, seedlings treated with multiple-layer CRF had higher starch concentrations but reduced dry mass and N, P, K concentrations in the nursery, and reduced diameter growth in the field. Fertilization rates of 80 and 120 mg N seedling^–1 generally yielded maximal plant dry mass and mineral nutrient content. Field survival peaked at 80 mg N seedling^–1. Seedling growth, soluble sugar content, and starch concentration in the nursery and survival in the field consistently decreased at rates of 200 and 240 mg N seedling^–1. In our study, optimal nursery and field performance of P. tabulaeformis were observed using single layer CRF at 80 mg N seedling^–1 (3.3 g CRF l^–1 media).

• Fu, Key Laboratory for Silviculture and Conservation, Ministry of Education, Beijing Forestry University; Beijing Laboratory of Urban and Rural Ecological Environment; 35 East Qinghua Road, Haidian District, Beijing 100083, China E-mail: bjfu_fu@163.com
• Oliet, Department of Natural Systems and Resources, Universidad Politécnica de Madrid, Ciudad Universitaria s/n, 28040 Madrid, Spain E-mail: juan.oliet@upm.es
• Li, Key Laboratory for Silviculture and Conservation, Ministry of Education, Beijing Forestry University; Beijing Laboratory of Urban and Rural Ecological Environment; 35 East Qinghua Road, Haidian District, Beijing 100083, China E-mail: glli226@163.com
• Wang, Key Laboratory for Silviculture and Conservation, Ministry of Education, Beijing Forestry University; Beijing Laboratory of Urban and Rural Ecological Environment; 35 East Qinghua Road, Haidian District, Beijing 100083, China E-mail: wjx198979@163.com

Chain flail delimbing and debarking may improve value recovery from small tree harvests, without renouncing the benefits of multi-tree processing. The technology is mature and capable of excellent performance, which has been documented in many benchmark studies. This paper offers new insights into the relationship between the performance of chain flail delimbing and debarking and such factors as tree volume, load volume, tree form and bark-wood bond strength (BWBS). The study was conducted in Chile, during the commercial harvesting of a Eucalyptus globulus Labill. plantation. In an observational study, researchers collected production data from over 780 work cycles, and work quality data from over 1000 individual trees. The analysis of these data shows that productivity is affected primarily by load volume. Work quality is affected by BWBS and by the number of trees in a load. Work quality degrades with increasing BWBS and tree number, since more trees tend to shield each other. Tree form has no effect on either productivity or work quality. Regression and probability functions are provided, and can be used for predictive purposes when trying to optimize current operations or to prospect the introduction of chain flail technology to new work environments.

• McEwan, Postgraduate Forest Programme, Faculty of Natural and Agricultural Sciences, University of Pretoria, Private Bag X20 Hatfield, Pretoria, 0028, South Africa E-mail: Andrew.McEwan@nmmu.ac.za
• Brink, Postgraduate Forest Programme, Faculty of Natural and Agricultural Sciences, University of Pretoria, Private Bag X20 Hatfield, Pretoria, 0028, South Africa E-mail: michal@cmo.co.za
• Spinelli, CNR IVALSA, Via Madonna del Piano 10, I-50019 Sesto Fiorentino (FI), Italy http://orcid.org/0000-0001-9545-1004 E-mail: spinelli@ivalsa.cnr.it

The forwarder loads processed wood and transports it to a landing. Productivity of forwarding could be improved by increasing driving speed, but difficult forest terrain limits this. According to current literature, crane work is the most time-consuming work element of forwarding, so improving crane work productivity is essential for improving forwarding productivity. One way to do this is through automation of recurrent boom movement patterns, or alternatively automation can be used to ease crane work. When using conventional boom control (CBC), the operator manually controls each of the independent boom joint movements and combines them to achieve a desired boom tip movement, but boom tip control (BTC) allows the operator to control boom tip movements directly. The objective of the present study was to examine whether BTC facilitates crane work and affects the slopes of learning curves for beginner-level forwarder operators. The study was carried out using a standardised test routine to evaluate effects of two fixed factors, system (levels: CBC, BTC) and point of time (four levels), on five dependent variables. Four of the five dependent variables measured ease of boom control and the fifth measured crane work productivity. The results showed that there were no significant differences in the slopes of learning curves between the systems but the BTC did increase crane work productivity and made boom control easier.

• Manner, The Forestry Research Institute of Sweden (Skogforsk), Uppsala Science Park, SE-751 83 Uppsala, Sweden http://orcid.org/0000-0002-4982-3855 E-mail: jussi.manner@skogforsk.se
• Gelin, The Forestry Research Institute of Sweden (Skogforsk), Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: olle.gelin@skogforsk.se
• Mörk, The Forestry Research Institute of Sweden (Skogforsk), Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: anders.mork@skogforsk.se
• Englund, The Forestry Research Institute of Sweden (Skogforsk), Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: martin.englund@skogforsk.se

Use of fast-growing tree plantations on dedicated areas is proposed as a means of reconciling fibre production with conservation objectives. Success of this approach however requires fine-tuning silvicultural scenarios so that survival and growth are optimized while management and environmental costs are minimized. This is particularly challenging for hybrid larch (Larix × marschlinsii Coaz), a shade-intolerant species planted on fertile sites in Quebec (Canada) where legislation prevents the use of chemical herbicides. In this context, multiple motor-manual release treatments are often required, with high impacts on costs and social issues related to the scarcity of a qualified workforce. We established a split-split-plot design on a recently harvested site to assess the main and interaction effects of mechanical site preparation (MSP) intensity (five modalities of trenching or mounding), motor-manual release scenario (one or two treatments) and planting depth (0–3 cm or 3–10 cm) on hybrid larch seedling growth and survival six years after planting. Mechanical site preparation intensity and planting depth did not influence seedling growth after 6 years. The lack of significant interaction between MSP and release scenarios indicates that these operations should be planned independently. A more intensive MSP treatment cannot replace a second motor-manual release on fertile sites, as proposed to reduce costs. Our results also show the significant advantage of performing two motor-manual release treatments two years apart (the first one early in the scenario), over performing a single treatment. Our study provides silvicultural guidelines for the establishment of high-yield exotic larch plantations.

• Thiffault, Direction de la recherche forestière, Ministère des Forêts, de la Faune et des Parcs du Québec, 2700 rue Einstein, Québec, QC, Canada G1P 3W8; Centre d’étude de la forêt, CP 8888, Succursale Centre-ville, Montréal, QC, Canada H3C 3P8 http://orcid.org/0000-0003-2017-6890 E-mail: nelson.thiffault@mffp.gouv.qc.ca
• Paquette, Centre d’étude de la forêt, CP 8888, Succursale Centre-ville, Montréal, QC, Canada H3C 3P8; Université du Québec à Montréal, Département des sciences biologiques, CP 8888, Succursale Centre-ville, Montréal, QC, Canada H3C 3P8 http://orcid.org/0000-0003-1048-9674 E-mail: alain.paquette@gmail.com
• Messier, Centre d’étude de la forêt, CP 8888, Succursale Centre-ville, Montréal, QC, Canada H3C 3P8; Université du Québec à Montréal, Département des sciences biologiques, CP 8888, Succursale Centre-ville, Montréal, QC, Canada H3C 3P8; Institut des Sciences de la Forêt tempérée (ISFORT), 58 rue Principale, Ripon, QC, Canada JOV 1V0 E-mail nelson.thiff E-mail: christian.messier@uqo.ca