Current issue: 58(4)

Under compilation: 58(5)

Scopus CiteScore 2023: 3.5
Scopus ranking of open access forestry journals: 17^th
PlanS compliant

Silva Fennica vol. 38 no. 3 | 2004

Category : Research article

article id 420, category Research article

Jukka Matero. (2004). Cost-effective measures for diffuse load abatement in forestry. Silva Fennica vol. 38 no. 3 article id 420. https://doi.org/10.14214/sf.420

Keywords: buffer strips; cost effectiveness; drainage maintenance; nutrient leaching

Abstract | View details | Full text in PDF | Author Info

This paper theoretically and empirically analyzes the design of cost-effective diffuse load abatement in forestry. Harvesting with related forest regeneration and drainage maintenance increases nutrient leaching, while riparian buffer strips and adjustments in drainage maintenance technology can be used to prevent this leaching. By utilizing a two-period model it is shown that cost-efficiency requires the establishment of a buffer strip system and a reduction in both current harvesting, and in drainage maintenance – if practized – relative to the private optimum to reflect their effects on water pollution. A simulation analysis was conducted to assess the magnitudes of the decision variables of the theoretical model, as well as to evaluate alternative technologies for the implementation and use of buffer strips and for the adjustment of drainage maintenance. The results for a representative forest holding in the southern half of Finland show that it is possible to considerably reduce total phosphorus leaching with minor cost.

Matero, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: jukka.matero@joensuu.fi

article id 419, category Research article

Tero Heinonen, Timo Pukkala. (2004). A comparison of one- and two-compartment neighbourhoods in heuristic search with spatial forest management goals. Silva Fennica vol. 38 no. 3 article id 419. https://doi.org/10.14214/sf.419

Keywords: simulated annealing; Hero; tabu search; 2-optimal heuristic; spatial optimisation; random ascent

Abstract | View details | Full text in PDF | Author Info

This study presents a comparison of the performance of four heuristic techniques with one- and two-compartment neighbourhoods in harvest scheduling problems including a spatial objective variable. The tested heuristics were random ascent, Hero, simulated annealing and tabu search. All methods seek better solutions by inspecting the neighbourhood solutions, which are combinations that can be obtained by changing the treatment schedule in one (one-compartment neighbourhood) or two (two-compartment neighbourhood) compartments. The methods and neighbourhoods were examined in one artificial and four real landscapes ranging from 700 to 981 ha in size. The landscapes had 608 to 900 stand compartments, and the examined planning problems had 2986 to 4773 binary decision variables. The objective function was a multi-objective utility function. The spatial objective variable was the percentage of compartment boundary that joins two compartments, both of which are to be cut during the same 20-year period. The non-spatial objectives were net incomes of three consecutive 20-year management periods and the remaining growing stock volume at the end of the third 20-year period. In another problem formulation, the total harvest of the first 20-year period was used as an objective variable together with the spatial objective. The results showed that a two-compartment neighbourhood was systematically and often clearly better than a one-compartment neighbourhood. The improvements were greatest with the simplest heuristics, random ascent and Hero. Of the four heuristics, tabu search and simulated annealing proved to be the best methods, but with a two-compartment neighbourhood the differences between methods were negligible.

Heinonen, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: th@nn.fi
Pukkala, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: timo.pukkala@joensuu.fi

article id 418, category Research article

Tron Eid. (2004). Testing a large-scale forestry scenario model by means of successive inventories on a forest property. Silva Fennica vol. 38 no. 3 article id 418. https://doi.org/10.14214/sf.418

Keywords: forest planning; growth; validation; large-scale scenario analyses

Abstract | View details | Full text in PDF | Author Info

Modellers of large-scale forestry scenario models face numerous challenges. Information and sub-models from different disciplines within forestry, along with statistical and mathematical methodology, have to be considered. The individual biological sub-models (i.e. models for recruitment, growth and mortality) applied in large-scale forestry scenario models are in general well documented and extensively evaluated. However, evaluations by means of full-scale comparisons of observed and predicted values for continuous forest areas, where the totality of the large-scale forestry scenario model including interactions between sub-models and other parts of the model, are considered, have rarely been seen. The aim of the present work was to test the totality of the Norwegian large-scale forestry scenario model AVVIRK-2000, and thereby evaluate the applicability of the model for use in management planning. The test was done by means of successive inventories and accurate recordings of treatments over a period of 30 years for a property comprising 78.5 ha forest-land. Seen in the perspective of management planning, the differences between observed and predicted values for potential harvest level, growing stock and growth were small, e.g. a difference between observed growing stock in year 2000 and growing stock in the same year predicted from 1970 of 2.6%. The model may therefore be applied for practical purposes without any fundamental changes or calibrations of the biological model basis. However, the present test should be seen as an example that failed to falsify the model, rather than a final validation. As long as the model is in practical use, further evaluations should continue and subsequent possible calibrations should be performed.

Eid, Agricultural University of Norway, Dept of Ecology and Natural Resource Management, P.O. Box 5003 NO-1432 Ås, Norway E-mail: tron.eid@ina.nlh.no

article id 417, category Research article

Jori Uusitalo, Sampsa Kokko, Veli-Pekka Kivinen. (2004). The effect of two bucking methods on Scots pine lumber quality. Silva Fennica vol. 38 no. 3 article id 417. https://doi.org/10.14214/sf.417

Keywords: harvesting; mechanized logging; tree bucking

Abstract | View details | Full text in PDF | Author Info

Modern harvesters are equipped with measurement and bucking optimization systems able not only to continuously measure the length and diameter of the stem but also to predict the profile of the unknown part of a stem and to calculate the optimal cross-cutting points for the whole stem. So far, tree-bucking optimization in the Nordic countries has been efficiently applied only with spruce because the quality of pine and birch varies much more both within a stem and between stems. Since limitations in the measuring equipment mean that the presence and position of grade limits as well as additional defects in the stem will normally have to be detected and estimated manually. Consequently, optimization works inefficiently because the harvester operator is continuously forced to disregard the cutting suggestions supplied by the harvester’s automatic system. This paper presents the outcome of research intended to define how change from the current quality bucking principle to automatic bucking affects lumber quality. The study is based on field experiments and test sawing data on 100 Scots pine (Pinus sylvestris) stems from southwestern Finland in 2001. Automatic bucking does not markedly lower the amount of good-quality lumber compared to quality bucking. Since automatic bucking inevitably leads to log distribution that matches the length requirements of customers better, it may be regarded as appropriate for these harvesting conditions.

Uusitalo, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: jori.uusitalo@joensuu.fi
Kokko, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: sk@nn.fi
Kivinen, University of Helsinki, Department of Forest Resource Management, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: vpk@nn.fi

article id 416, category Research article

Glen Murphy, John G. Firth, Malcolm F. Skinner. (2004). Long-term impacts of forest harvesting related soil disturbance on log product yields and economic potential in a New Zealand forest. Silva Fennica vol. 38 no. 3 article id 416. https://doi.org/10.14214/sf.416

Keywords: Pinus radiata; harvesting; compaction; tree growth; litter removal

Abstract | View details | Full text in PDF | Author Info

The effect of soil disturbance (litter removal, topsoil removal and compaction) from forest harvesting on the productivity, log product yields and economic potential of second-rotation Pinus radiata growing on a clay loam soil, was assessed in a long-term trial 21 years after planting. The results are projected forward to the expected harvest age of 28 years. Relative to control plots, average tree volume at 21 years was reduced by 8% in the plots where the litter had been removed and the topsoil had been compacted, and by up to 42% in the plots where the topsoil had been removed and the subsoil compacted. The “degree of compaction” did not have a significant effect on average tree volume in the plots where litter had been removed but did have a significant effect where the topsoil had been removed. Per tree economic potential was reduced to a greater extent (up to 60% loss in value) than average tree volume was reduced. This was largely due to changes in log product yield distribution. Projecting tree growth forward to the end of the rotation at age 28 indicated that the impacts of soil disturbance on tree growth, economic potential and log product yields are likely to be similar in relative terms to those found at age 21.

Murphy, Forest Engineering Department, Oregon State University, Corvallis, OR 97331, USA E-mail: glen.murphy@orst.edu
Firth, Forest Research, Sala Street, Rotorua, New Zealand E-mail: jgf@nn.nz
Skinner, Forest Research, Sala Street, Rotorua, New Zealand E-mail: mfs@nn.nz

article id 415, category Research article

Sandhya Samarasinghe, Don Kulasiri. (2004). Stress intensity factor of wood from crack-tip displacement fields obtained from digital image processing. Silva Fennica vol. 38 no. 3 article id 415. https://doi.org/10.14214/sf.415

Keywords: Pinus radiata; wood; fracture toughness; stress intensity factor; digital image correlation; orthotropic fracture theory

Abstract | View details | Full text in PDF | Author Info

Stress intensity factor of radiata pine (Pinus radiata) in Tangential-Longitudinal opening mode was determined from crack-tip displacement fields obtained from digital image correlation in conjunction with orthotropic fracture theory. For lower loads, experiments agreed with the linear elastic fracture theory but for higher loads, stress intensity factor and load relationship was nonlinear. For 41% of the specimens tested, tip-displacement based stress intensity factor agreed with that based on the ASTM standard formula for lower loads but deviated for higher loads closer to failure. The tip displacement plots showed that the nonlinear behaviour is due to large displacements which we attributed to large plastic deformations and/or micro-cracking in this region. The other 59% specimens showed a similar trend except that the crack-tip based stress intensity factor was consistently higher than the value obtained from the standard formula. The fracture toughness from tip displacements was larger than the standard values for all specimens and the two were related by a logarithmic function with an R2 of 0.61. The study also established that fracture toughness increases with the angle of inclination of the original crack plane to the Radial Longitudinal plane.

Samarasinghe, Lincoln University, P.O. Box 84, Canterbury, New Zealand E-mail: ss@nn.nz
Kulasiri, Lincoln University, P.O. Box 84, Canterbury, New Zealand E-mail: kulasird@lincoln.ac.nz

article id 414, category Research article

Markku Larjavaara, Timo Kuuluvainen, Heidi Tanskanen, Ari Venäläinen. (2004). Variation in forest fire ignition probability in Finland. Silva Fennica vol. 38 no. 3 article id 414. https://doi.org/10.14214/sf.414

Keywords: ignition; forest fuel moisture; forest fire; fire regime

Abstract | View details | Full text in PDF | Author Info

We examined climate-caused spatio-temporal variation of forest fire ignition probability in Finland based on empirical ignition experiments and 37 years of meteorological data from 26 meteorological stations scattered across Finland. First, meteorological data was used in order to estimate the variation in forest fuel moisture content with the model of the Finnish forest fire risk index. Second, based on data from empirical ignition experiments, fuel moisture content was linked with forest fire ignition probability. In southern Finland average forest fire ignition probability typically peaks in late May and early June, whereas in the northern part of the country the peak occurs at the end of June. There was a three-fold difference in the average annual ignition probability between the north-eastern part (3%) and south-western part of the country (9%). The observed differences in fire ignition probability suggest that the characteristics of the natural fire regime also vary considerably in the southern versus the northern part of the country.

Larjavaara, University of Helsinki, Dept of Forest Ecology, FI-00014 University of Helsinki, Finland E-mail: markku.larjavaara@helsinki.fi
Kuuluvainen, University of Helsinki, Dept of Forest Ecology, FI-00014 University of Helsinki, Finland E-mail: tk@nn.fi
Tanskanen, University of Helsinki, Dept of Forest Ecology, FI-00014 University of Helsinki, Finland E-mail: ht@nn.fi
Venäläinen, University of Helsinki, Dept of Forest Ecology, FI-00014 University of Helsinki, Finland E-mail: av@nn.fi

article id 413, category Research article

Mika Nieminen, Timo Penttilä. (2004). Inorganic and organic phosphorus fractions in peat from drained mires in northern Finland. Silva Fennica vol. 38 no. 3 article id 413. https://doi.org/10.14214/sf.413

Keywords: tree growth; drained peatland forests; phosphorus availability; sequential fractionation; site type classification

Abstract | View details | Full text in PDF | Author Info

Soil samples from 15 eutrophic, 26 herb-rich, 15 tall-sedge, and 11 low-sedge drained peatland sites were analysed for easily soluble and aluminum, iron, and calcium bound phosphorus (P) using the Chang and Jackson sequential fractionation method. Compared to earlier investigations, where only total and easily soluble P contents (e.g. NH4OAc or dilute H2SO4 extractable P) in peat have been analysed, significantly higher differences between sites were observed. The eutrophic sites were characterized by four to six-fold greater Ca-bound organic P and two to three-fold greater Ca-bound inorganic P contents than on the other three site type groups, whereas the average Al-bound inorganic P content of the eutrophic sites was only one-third of that at the other site types. Substantial differences between sites were also observed for Fe-bound inorganic P, i.e. two to four-fold greater Fe-P contents were measured at the herb-rich sites compared with the other three site type groups. The stand volume growth in the 67 studied drained peatland sites correlated significantly with Al-bound organic P and Fe-bound inorganic and organic P. The study showed that a detailed fractionation and discrimination of different forms of soil P is important in increasing the understanding of the relationship between P availability and vegetation community types and stand growth on drained peatlands.

Nieminen, Finnish Forest Research Institute, Vantaa Research Centre, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: mika.nieminen@metla.fi
Penttilä, Finnish Forest Research Institute, Vantaa Research Centre, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: tp@nn.fi

article id 412, category Research article

Xingliang Liu, Haiyun Xu, Frank Berninger, Olavi Luukkanen, Chunyang Li. (2004). Nutrient distribution in Picea likiangensis trees growing in a plantation in West Sichuan, Southwest China. Silva Fennica vol. 38 no. 3 article id 412. https://doi.org/10.14214/sf.412

Keywords: plantation; nutrient distribution; nutrient translocation; Picea likiangensis

Abstract | View details | Full text in PDF | Author Info

We measured nutrient distribution of Picea likiangensis (Franchet) E. Pritzel var. balfouriana trees growing in a plantation by field investigations, sample tree and plot harvest in West Sichuan, Southwest China. Based on the results in this study, the total biomass of plant compartments in plantation ecosystem was 114 829.1 kg ha–1. Tree, shrub, herb, bryophyte and litter layers accounted for 93.9%, 0.9%, 0.02%, 0.04%, 5.2%, respectively. The total biomass of tree layers was 107 817.1 kg ha–1. Needles, branches, stem wood, stem bark and roots accounted for 13.2%, 19.7%, 42.3%, 10.0% and 14.8%, respectively. The concentration of the nutrients was generally highest in the actively growing parts of the trees (e.g. needles) and lowest in the structural and not actively growing parts (e.g. stem wood). On the other hand, the concentrations of N, P, K and Mg were generally higher in the current year needles and branches than in the older needles and branches. These nutrient concentrations were also higher in the upper stem wood and bark than in the lower stem wood and bark, and in small roots than in large roots, whereas the opposite patterns were observed for the concentration of Ca in these compartments. The results will be helpful in understanding the nutrient behavior in a highly productive forest plantation and thereby providing decisive information for their sustainable management.

Liu, Chengdu Institute of Biology, Chinese Academy of Sciences, P.O. Box 416, Chengdu 610041, P. R. China; Sichuan Academy of Forestry, Chengdu 610081, P. R. China E-mail: xl@nn.cn
Xu, Chengdu Institute of Biology, Chinese Academy of Sciences, P.O.Box 416, Chengdu 610041, P. R. China E-mail: hx@nn.cn
Berninger, Département des sciences biologiques, Cp 8888 succ centre ville, Université du Québec à Montréal, Montréal (QC) H3C 3P8, Canada E-mail: fb@nn.ca
Luukkanen, Viikki Tropical Resources Institute, P.O. Box 28, FI-00014 University of Helsinki, Finland E-mail: ol@nn.fi
Li, Chengdu Institute of Biology, Chinese Academy of Sciences, P.O.Box 416, Chengdu 610041, P. R. China; Viikki Tropical Resources Institute, P.O. Box 28, FI-00014 University of Helsinki, Finland E-mail: licy@cib.ac.cn

Category : Research note

article id 421, category Research note

Pekka Helenius, Jaana Luoranen, Risto Rikala. (2004). Effect of thawing duration and temperature on field performance of frozen-stored Norway spruce container seedlings. Silva Fennica vol. 38 no. 3 article id 421. https://doi.org/10.14214/sf.421

Keywords: Picea abies; height growth; survival; frozen-planting; storage

Abstract | View details | Full text in PDF | Author Info

Increasing use of frozen storage in nurseries at northern latitudes calls for thawing methods that are safe, economical and easy to apply on a large scale. The easiest and most economical method would be to thaw seedlings in the same boxes they were stored in. However, doing this safely requires more knowledge about how long and at what temperatures seedlings should or can be kept in the boxes without reducing field performance. In this study, 1-yr-old frozen-stored Norway spruce (Picea abies (L.) Karst.) container seedlings were thawed for 4, 8 or 16 days at 4 or 12 °C in cardboard boxes before planting on a reforestation site and on experimental field in mid-June. Some seedlings were also planted on these locations after thawing for only 7 hours at 12 °C in order to separate frozen root plugs. We found some evidence that planting seedlings after short thawing periods (7 hours at 12 °C and 4 days at 4 °C), under which conditions the root plugs remain completely or partly frozen, has a negative effect on field performance of Norway spruce seedlings. Thawing over a 4-8 day period in cardboard boxes at ca. 12 °C appears to ensure complete thawing of the root plugs and unaffected field performance, but is short enough to prevent the growth of mould.

Helenius, Finnish Forest Research Institute, Suonenjoki Research Station, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: pekka.helenius@metla.fi
Luoranen, Finnish Forest Research Institute, Suonenjoki Research Station, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: jl@nn.fi
Rikala, Finnish Forest Research Institute, Suonenjoki Research Station, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: rr@nn.fi

Click this link to register to Silva Fennica.

If you are a registered user, log in to save your selected articles for later access.

Contents alert

Your selected articles

Follow @SilvaFennica