TOEMP #10 - Scoundrels and Wyrds... Complete!

A lazy Sunday afternoon doing laundry afforded me some time to finish off the last of the models for the 10th Tale Of Even More Painters challenge - the final two Psyker Battle Squad models, Sanctioned Psyker Morrin Dannel  and Commissar Lord Fidel Arden.

With these done, the Psyker Battle Squad is complete. In most games the PBS will be accompanied by the Sanctioned Psyker. As I read it, the fact that he is part of the squad will mean the unit will count as having 8 psykers for purposes of determining their psychic strength.

I wanted to keep the Overseer stylistically connected to the unit but as he isn't a psyker himself I decided that he shouldn't wear the standard green of the Adeptus Astra Telepathica. Instead I gave him a leather coat based on the tips that Ron posted over at From The Warp. I did attempt to paint the symbol of the Astra Telepathica on his back banner, though I'm not sure that it 'pops' enough against the green background.

With these, and the King Russ tanks from the last challenge, I really feel like I made some good headway on the army. I'd updated the painting chart and was pleased to see that at this point all the Elites are complete! Once I finish off the Techpriests and servitors, the HQ will be finalized as well, so I think I'll be attacking them next...

Getting closer and closer to finishing off the army. ...Of course right about here is where I start thinking "Hmm, what if I replaced this with that, and maybe add a couple of these?" I'm doing my best to resist such urges however!

TOEMP #10 - Scoundrels and Wyrds... Part 2

More than halfway done with the tenth challenge for the Tale of Even More Painters at this point. I had a quiet evening yesterday to finish off Dunno's Deadeyes, a 5-man group of Ratling Snipers seconded to the Mordian 7th Regiment:

Fairly straightforward paint scheme, though they were rather fun to paint as they each have a lot of personality. I went with grey fatigues as they are an Elites choice (the veterans all wear grey fatigues and red armor), but since the Ratlings don't really wear armor, they ended up being a bit monochromatic. That works for me however, as the bright red armor would sort of stands at odds with the Ratlings sneaky nature.

Some folks asked for a scale shot of the Termites that I picked up from Ramshackle games, so I pulled out the Drop Pod and snapped a quick picture. It was nice enough outside over the weekend to get a mess of stuff primered, and I'm actually quite looking forward to painting the Termites, they should come together pretty quickly.

Four more models remain for this stage of the TOEMP challenge, three Psykers and the Commissar which I hope to finish off over the weekend. Once that's done, all the HQ and Elites for the Mordian 7th will be complete!

TOEMP #9 - Heavy Metal, part 4

I managed to get the King Russ tanks painted up, but the weather is so cold I'm unable to seal them and add the water slide transfers:

Vanquisher and Battlecannon turrets - The Vanquisher is the must-have variant for me. It definitely makes my marine opponents sweat!

Punisher cannon and Heavy Bolter sponsons for maximum horde-killing!

Executioner and Plasma Sponsons - All of the turrets are swappable, and along with the alternate sponson weapons, I will be able to arm the tank in all sorts of combinations. The one thing I really like about the new Leman Russ kit is the swappable weapons. Definitely nice for flexibility!

I've been gathering bits to build an Ordinatus Minoris for the Adeptus Mechanicus, and the newest addition is a set of interesting-looking tracks. I'm still working on how I want it to look, the intent is to make a gantry section in the back using some Necromunda bulkheads, but I'm unsure how I want to approach the front section. Many sketches have been made and rejected, though I'm leaning towards using a Chimera kit and a mess of plasticard to extend and bulk out the command section. It's not going to be super-massive like the huge Ordinatus Majoris from the old epic game, but I do want to make it an homage to its style:

This will definitely be a long-term project. I don't want to rush into it, and I'm still gathering appropriate bits. I'm going to focus on the Guard for a while though, there's a lot of little projects left for the Mordian 7th that I need to polish off before I hare off on some monstrosity!

TOEMP #9 - Heavy Metal, part 3

I hope everyone has been having an enjoyable holiday so far! The weeks leading up to the new year are always packed full so squeezing in some brush time is tough. On the up side, I have a few days off coming up and I hope to be able to finish off the King Russ tanks.

In the home stretch on the tanks, though - I started the detailing process, and laid down the Dark Flesh undercoat for the red sections.

 

I decided on blocking in the red side panels on one of the tanks to see how it looked, and I think I like how it's coming along. I'm going to go back and make the cogs along the upper track guard red, but other than I think I'll leave the rest of the detail in grey and pick out the winged skull in gold.

 I received a package in the mail on Wednesday, which contained a few models from eBay - more bits for the Adeptus Mechanicus army. I've seen some interesting conversions done with the Imex "Robogear" models, and poked around to see what was available. This 'Spider' model caught my eye, and I thought I might be able to use it to make a Myrmidon Assault Engine - described in the codex as being like a somewhat smaller version of the Defiler. Multi-legged chassis, a pair of dreadnought close combat weapons and a twin-linked autocannon, but lacking the Battle Cannon and having slightly weaker armor. I was really pleased with the contents of kit, for a 'snap-fit' model, it's rather well detailed and it appears it will work out nicely!

TOEMP #9 - Heavy Metal, part 2

Well, I managed some forward motion on the King Russ tanks over the last few days, and got the main hulls and tracks painted. One of the nice things about painting tanks to me is that it really feels like you're getting a lot done. While it may take an hour to lay the base colors on, once it's done it certainly looks like I've accomplished a lot.

I start with a Shadow Grey basecoat followed by a drybrush of Fortress Grey, which is quick and easy, and I find it to be a good neutral color against which almost any other color I may choose to use stands out nicely.

 

On the tracks my standard scheme is a heavily drybrushed basecoat of Dark Flesh followed by a light drybrush of Snakebite Leather. I find that doing so ties the tanks in thematically with the infantry bases, which I rim in Dark Flesh. Once I get them all detailed out I'll go back and add a little road grime and mud-spatter along the bottom edges of the hull using the same earth tones.

 

Once I'm done with those stages, I go back over the tanks and re-black anything that's going to be painted in other colors, these shots are all taken after that step, but suffice it to say that following the drubrushing of the hulls, not only are the weapons, exhausts and what-have-you fairly spattered, but my hands (and occasionally forearms) are too. It's not the most tidy of painting methods!

 

 Painting up all of these at the smae time ensures that I'll be able to mix and match without there being egregious color variations between turret and hull. Although I use the same colors on all my tanks, when you set one that I painted six months ago next to one I painted three months ago, there's a noticable variation between them. One I may have drybrushed a bit heavier, or (and I've noticed this from time to time) one pot of Shadow Grey was a little bit darker or lighter than the next, and the tank is just not quite the same shade. It's not really a big deal, but it is noticable.

The 'heavy lifting' on the tanks is now complete, so all I have to do now is go over them and pick out all the detail work and add the heraldry. My intent is to use these interchangeably between the Mordian 7th and the Adeptus Mechanicus armies, so I'm considering painting in the side panels in red, but I'm not entirely sold on that idea just yet...

TOEMP #9 - Heavy Metal, part 1

The next Tale of Even More Painters challenge was issued a couple days back, and the option du jour for me this go-around is a minimum of two Heavy Support choices. My intention is to finish a trio of King Russ tanks that have been sitting around in a cleaned-but-not-assembled stage for the better part of 6 months, so I took advantage of the nice weather on Sunday to finish building the tanks and get them primered. Of course, these pictures of black primered models are somewhat grainy-looking since I had to crank up the mid-tones and contrast to even be able to see any of the details, but I figured I'd document the process from start to finish anyway!

First up is my favorite incarnation of the Leman Russ turret options, the Vanquisher. Several of my usual opponents are marine-playing cheese mongers, and facing off against multiple Land Raiders is a common occurrence. The Vanquisher is always handy in those situations for the massive armor penetration, and is the one tank that is guaranteed to instill a sense of dread in my opponents. This particular tank has no side sponsons, giving me a lower-cost hull option for lower-point value games.

Next up is the "Hold on, I don't have enough dice" variant - the King Russ Punisher, with hull mounted and sponson Heavy Bolters (from the Predator kit). It performs admirably against horde armies, but I find that even though the Punisher Cannon is AP-, it is still surprisingly effective vs. MEQ armies just due to the sheer number of saves the opponent is called upon to make. I built this one as an answer to a friend's Baal Predator, adding the Heavy Stubber on a pintle mount just for fun. 32 dice dropping on the table at once is always a fun sound...

Next is the most modular of the three hulls, currently shown armed with the "vanilla" Leman Russ turret. As a test the side sponsons on this tank were taken from the new Leman Russ Demolisher kit (which is also where the Punisher cannon came from). I really like the fact that the model designers gave us the option to do swappable weapon options, and the more I look at it, the more I like the look with the enclosed sponsons (though I don't dislike Predator-style sponsons either). Part of my intention for these three tanks is for them to be usable in the Mordian 7th and the Adeptus Mechanicus armies that I'm working on, so the experimental nature of the tanks load outs can be handwaved away as "Field Expediency Trials"...

 

Lastly, as I had a spare turret left over from an earlier project, I decided to utilize some of the leftover turret bits from the Demolisher kit and make an alternate Executioner turret for the King Russ variants. My intent is to use this one in concert with the insertable Plasma Cannon sponson options for maximum Plasma goodness.

I'm planning on painting all three of these tanks concurrently so that the paint tint and highlights match up exactly and the turrets and hulls can be swapped out interchangeably. Further updates to follow as I get some brush time logged!

TOEMP #8 Complete - Forces of the Imperial Navy

I managed to finish off the second Heavy Support choice for the 8th Tale of Even More Painters challenge - An Imperial Navy Vulture. As soon as Forge World released the model with the twin Punisher Cannon upgrades, I knew I had to have one. Taking the lessons learned in assembling the first Valkyrie served to make this model go together rather smoothly.

I went with the khaki/bone/slate grey color scheme that I'd used for the previous Naval flyers, though I decided to pick out a slightly different set of panels for the bone color than I did with the Valkyrie to make them a bit more individualized. I still need to add the transfers to both of them, but as the weather is so cold at the moment I can't seal this model and as such the decals will have to wait.

 

I pulled out the other models to get a group shot and realized I still have yet to finish the base for the Thunderbolt fighter. There's still one more flyer in the queue - a Vendetta, to round out the various Naval options. Time to get cracking on that, I suppose!

TOEMP #7 - All Hail The Omnissiah! Part 3 (finally complete!)

Better late than never, as they say - With the extended Thanksgiving holiday I had time to finish off the models I had on deck for the 7th Tale of Even More Painter's challenge. I just wasn't happy with the initial paint scheme I'd chosen for the Archmagos Veneratus, and ended up re-primering it and starting anew.

Overall it turned out more or less like what I had envisioned - This model is by far the most heavily-converted thing I've made, and I was worried that it was going to end up just looking like a pile of random bits based on what it looked like before I primered it. I did notice while painting it however that somewhere along the assembly stage I managed to get one of the banner poles facing the wrong way - I ended up just trying to make do as best I could in the painting stage, as trying to remove the banner pole and reposition it would undoubtedly result in the complete destruction of the model... Doh.

Part of the previous challenge was to finish up a piece of terrain as well (lord knows I have enough unpainted terrain lurking in the Closet of Doom), so I dragged out the Shrine of the Aquila, assembled it and gave it a dash of paint.

I went with a concrete grey scheme but it ended up looking pretty bland, so to spice it up a bit I ran off a couple banners on the ol' color printer, distressed them a bit and made a set of mounting brackets. The splash of red and white definitely makes the piece pop a bit more than it did before. Only a half dozen more buildings to go... Ugh.

Last but not least my FLGS let me know they got in a Fortress of Redemption, and as I don't have nearly enough terrain (hah!) I figured what the heck. It's really quite huge once it's all assembled, so I built it to come apart into two sections for storage. The two sections fit together quite snugly on the tabletop, so I don't foresee much of an issue during gameplay. I'm still pondering how I want to paint it however... With big wide brushes regardless of color, I suppose!

TOEMP #8 - A (Strength 10) Blast from the Past... And some other random nonsense.

Well, after a couple rather non-productive weeks and a failed challenge, deadline-wise on #7, I wanted to get back in form. The challenge this go-round is fairly open as far as unit types to paint, so I decided that I'd crank out one of the final Heavy Support choices for the Mordian 7th - It had been too long since I'd painted any guard, after all!

Although no longer available in the current Guard codex, the Rapier Laser Destroyer is a quad-barreled lascannon mounted on a tracked unit. In the original RT-ere rule set it was rather deadly, and the fine folks over at the Tempus Fugitives website have created a set of rules for it that my local opponents don't seem to mind playing against. I decided on a more red-dominated scheme on this, to represent it being provided to the army and maintained by the Adeptus Mechanicus forces that are part of the 7th.

Speaking of the Adeptus Mechanicus, I ended up re-primering the Archmagos Veneratus after a disappointing initial paint scheme, and I have gotten the base reds back on to the model. I'm hoping to get it finished off over the upcoming Thanksgiving holiday, if all goes according to plan. Of course, as is my modus operandi, over the last week or so I did hare off on another small side project as well...

Now before anyone goes into shock about the non-GW models, rest assured that they will be put to use in the 40k universe. These models are the next batch of adversaries for my upcoming Rogue Trader campaign, which I'm planning on kicking off over the new year. These six will represent the group's main villains - Haderach Fel and his group of cronies. I did finish up one model so far, as the fluffy bustled dress and sniper rifle combo was just too much fun to resist! The models are from Fantasy Flight Games Anima Tactics range, with a few 40k-stule weapon swaps here and there. Scale-wise they're all a touch taller than the standard 40k model, but not egregiously so. Well, the one guy in the back on the 40mm base is about 7.5' tall apparently, but I'm going to work that into the story, so it'll work out just fine.

This model will represent Lady Irina Demephon, a mad noblewoman with a penchant for dashing ship's captains. ...Dashing ship's captains brains out with high-calibre rounds, to be more specific!

Lastly is the first of several Battlefleet Gothic miniatures in the works - One can't play Rogue Trader without a selection of spacecraft, after all! This will be the player's initial vessel, the Eclipse Du Normandie - a Dauntless-class light cruiser.

I'm looking forward to running the game of Rogue Trader, as I think there's going to be a lot of good crossover opportunity for modeling and painting between that game and 40k. For example, the Eldar Corsairs that I'd built will be pulling double duty - As a Troops choice for the Eldar army, and as members of the Stygian Reavers, a group of Eldar pirates that will be a thorn in the side of the players in the RPG!

TOEMP #7 - All Hail The Omnissiah! Part 2

I managed to finish off the Tech Magos Cabal over the weekend, but haven't made much forward progress on the Archmagos Veneratus - I'm not entirely sure I like where the paint scheme is going on it and may start over. However, I'm fairly pleased with how these five turned out:

On the other hand, after painting up three sets of these over the years, I just now figured out that what I took to be an odd little aspergils in the right hand of the Magos Prime is actually supposed to be connected to the little port on the back of his cherub. Of course, I didn't come to this realization until after I'd finished painting them. Argh.

I've had the Magos Biologis and the two servitors that are part of the set painted for several years, so it's nice to finally have the whole set painted up and ready to use!

It looks to be a relatively quiet weekend coming up, so I'm hoping I can get some brush time and finish off the Archmagos Veneratus. After that I really need to get back to painting the guard...

TOEMP #7 - All Hail The Ommnissiah! Part 1

Well we're coming up on the deadline for the 7th TOEMP challenge, and unfortunately it looks like I'm going to fall short on this one by a day or two. The last couple weeks have been chock full of long hours at work, houseguests, band shenanigans and other distractions and I haven't had a lot of time to put brush to model. However, I wanted to post what I have gotten done thus far! After building and painting the Knight Paladin I was all enthused about the burgeoning Adeptus Mechanicus army that's been lurking on my shelves for years. Using the codex from the Tempus Fugitives website I figured the old Skullz-era models would work well for a Tech Magos Cabal, and I started work on the faces, armor and robes:

I still need to do the metallics, power cables and the yellow/black hazard stripes on them, but they're approaching completion. These have always been hands down my favorite tech priest models, and over the years I've gone through three sets of them. Once I get these five done I'll take a picture of the whole set (several of which have been painted for years).

Next up is the other HQ choice - the Archmagos Veneratus. As described in the codex: "One of the original Tech Priests who codified the Mysteries and Warnings of the Cult Mechanicus over ten millenia ago. As age and technological enhancement stripped them of their humanity, so they became more detached from the day-to-day affairs of the Mechanicus and spent longer periods of time in solitude musing on the destiny of humanity. Occasionally, an Archmagos Veneratus will arrive without warning to take command of a Skitarii Legio. They are answerable to no one, not even the Fabricator General. Their word is Lore and their reasons for involving themselves are unfathomable, much like the exotic battlesuits they pilot into battle."

The model was based on the work of a friend of mine who sent me a box full of Ad-Mech goodies. I ended up rendering it down for parts, but kept to the spirit of the original build - a half-machine torso attached to a massive four-legged walker and armed with a mix of archeotech weaponry. In this case, a Conversion Beamer and a Multi-Melta.

I took advantage of a warm day to primer it and started thinking about how I wanted to paint it - though I only got the basest touch of paint on it before I had to do something else.

Definitely a fun model to build, the Ad-Mech are second only to the Orks in conversion potential, which is one of the main things that draws my interest in the army. Many a bits box delve goes into making the models, that's for sure!

It appears that I have a relatively free weekend coming up, so I hope to be able to finish these off in the next few days. A little short of the deadline, but when push comes to shove, Real Life(tm) must take precedence over the hobby (much as I'd wish otherwise at times)...

TOEMP #6 - Back to Basics. ...Well, Elites.

Back during challenge #4 for the Tale of Even More Painters, I'd finished building a squad of Storm Troopers utilizing bits from the Marine Scout and Storm models, various Cadian bits, some Forge World heads and the odd length of guitar string. Following my brief foray into the Eldar, I figured that I'd swing back over to the guard for a unit and painted them up:

I enjoyed using the Scouts from the Land Speeder Storm kit - they afforded some interesting poses, I particularly liked building the trooper who's vaulting over a section of wall. I'm not 100% happy with the hellguns however, in retrospect I think I should have utilized the shotguns that come with the scouts as the basis for the weapon as they would have turned out a bit beefier. To make up for it, I added chainswords to various models to remind me that they do in fact carry both a pistol and a CCW.

Part of the current challenge is to utilize a technique that you don't ordinarily try. Since I need the guard to look as uniform as possible, I figured I'd try something new on a Dire Avengers squad instead. First off I primered the models white, which is something that I haven't done in the better part of 20 years! I decided that I'd also go with an ink wash base which is rather atypical as well - I don't use a lot of washes, mostly just on metallics.

It should be interesting to see how they turn out, nonetheless!