Bandits & Villagers for Pulp Alley's 'The Bounty Scenario'

 I'm taking two tables to the next Pulp Alley UK Games Day, as well as the re-skinned the Hollow, the other is The Bounty, where the Leagues are searching for a group of bandits (Which are the Major Plot Point)

I've just used whatever desert terrain I have, to represent what I think that an Old West  Mexican village would look like.

For the Bandits I Got Some Figures from the Gringo 40's Mexican Revolution range. These are nice miniatures but some of the rifles look a bit small on some of the figures, so I swapped them for other guns or a rope.

For the four minor plot points I've used some 1st Corps Miniatures Villager Figures, these are The Woman, The Beggar & The Kid. 

For The Stranger Plot point I decided it would be good to paint & use the Wargames Illustrated Giants in Miniature figure of  Alan Quatermain, as he looked suitably Western to me & he really needed painting.

Some Old School Citadel Goodness

 

As can be seen from the picture above, I've just been painting up some 

old Citadel Miniatures from the late 80's early 90's 

Judge Reed

A Chaos Warrior (at least I think it is, I can’t find him anywhere!) with a Metal Citadel embossed shield

A few Orcs (I seem to have missed the Varnish off the Orc Shield!)

The Brigadier & Sgt. Benton

& a Modern Statue that comes with the Cultists from 1st Corps

Sorry still rubbish at photos 🤣

A Few Pulp Miniatures

 Just been trying to take some pictures of my Pulp Alley Leagues & some plot points, so I thought I might as well share them on here, as they’ve not been shown all together 

First is The Tunbotham Detectives, then the next league is The Order of the Silver Cross a Vatican investigation team 

Following after are the plot points, with some scratch built & bought bits. 

Finally, there’s  three Perils 2 drunken sailors & a goose

A Pulp & Silver Bayonet photo Drop

 I seem to have let the time slip by again without posting any updates 😕

Anyway here's some more Silver Bayonet & Pulp Miniatures.

First Up are the figures for The Silver Bayonet 

Ghouls From the Silver Bayonet Range

A Quick job on a couple of Reaper Gargoyles

I touched up & Re-based The Specimen Miniature from Empire of the Dead range

A Dog-Head from the Silver Bayonet Range

Two Vyrkolakas again from the Silver Bayonet Range

Now for some Pulp Goodness, ready to play The China Station Campaign for Pulp Alley

Two North Star Figures flanking , A Copplestone Chinese Warlord Figure & an old Citadel miniature

Some North Star Railway workers

North Star Tongs

First Corps Miniatures from the follies range

More First Corps Miniatures from the follies range

Two Copplestone Back of Beyond figures

And thats it, thanks for looking

Pulp Miniatures Size Comparison Pictures

 Simon has asked about the size of the 1st Corps miniatures compared to other figures, so here’s a few photos with different figures

Foundry, Artizan, 1st Corps, Warlord/BoltAction, What The?! Miniature’s 

Hasselfree, Citadel, 1st Corps, crooked Dice

Pulp, 1st Corps, Pulp

1st Corps, Partizan Freebie, 1st Corps, Black Cat, Foundry, Artizan

1st Corps, Wargames Atlantic, 1st Corps, Partizan Freebie, White Knight, 1st Corps

Pulp, Foundry, 1st Corps, Pulp, 1st Corps, Pulp

I must remember to put some handles on those doors 🤣🤣

1st Corps Cultists & Charaters

 I’ve finally got a phone with a decent camera on it, so I thought that I had better start posting again & see how it goes 🤞

These are all from the Follies range sculpted by Mark Fuller. 

 https://1stcorps.co.uk/product-category/20th-century/20th-century-c20th-follies/ 

 Policemen, based on Will Hay & gang

Mechanic & figure that I use as a Customs officer 

The runaway couple

Cultists abducting someone in a carpet

Cultists with rifles

Cultists with pistols

Boy Scout Leader & Boy Scout

1st Corps Mechanic

 Finally found time to paint the Mechanic from 1st Corps that comes with the Fuel Pump set.

He’s a cracking little figure with plenty of Character. 

I’ve based him on a metal base insert from Black Cat Miniatures on top of one of the newer lipped Warlord games plastic bases. 

1stCorps Petrol Pumps

 I ordered The 1stCorps Petrol Pumps & Attendant & have Painted up the the pumps &Motor oil cabinet

This is a fantastic little set which I will be using for Pulp & WW2 games. 

I printed out some garage signs from the ‘tinterweb and painted the edges before glueing to to cabinet. 

The base for the pumps is an oval of mdf with sand paper for the tarmac & cardboard for the kerb stones. I also cut off the ‘shell’ from the top of the squat electric (blue) pump & replaced it with a large round pin head to represent a glass globe.  

I’ve photographed them with an mdf shed (can’t remember who makes it) & some oil drums that I picked up of eBay, I think 🤔 

I don’t know what has happened with the last 2 posts getting swapped round 🥴

1stCorps War Wagon

 

I recently painted one of the fantastic War Wagons from 1stCorps for my saga Rus Princes Warband. 

It has a resin main body & metal wheels etc. 

There was a couple of miscasts on the resin armour planking side, so I tried to make it look like battle damage. 

It doesn’t come with any crew & I had a couple of figures with open hands that a friend gave me (thanks Jim 😁) spare so I cut the swords down to resemble knives & put stones in their hand for the improvised weapons. I also added some chains to the ramp, a plastic helmet from the Fireforge Russian sprues, a spear & a hung pheasant from the old GW Bretonian Men at Arms sprues.