UNISONIC TECHNOLOGIES CO.
, LTD
19N10 Preliminary Power MOSFET
100V N-Channel MOSFET
DESCRIPTION
The UTC 100V N-Channel enhancement mode power field
effect transistors (MOSFET) are produced by UTC’s planar stripe,
DMOS technology which has been tailored especially in the
avalanche and commutation mode to minimize on-state
resistance, provide superior switching performance, and
withstand high energy pulse. They are suited for low voltage
applications such as audio amplifier, high efficiency switching
DC/DC converters, and DC motor control.
FEATURES
* RDS(ON) = 0.1Ω @VGS = 10 V
* Ultra low gate charge ( typical 19nC )
* Low reverse transfer Capacitance ( CRSS = typical 32pF )
Lead-free: 19N10L
* Fast switching capability
Halogen-free: 19N10G
* Avalanche energy Specified
* Improved dv/dt capability, high ruggedness
SYMBOL
2.Drain
1.Gate
3.Source
ORDERING INFORMATION
Ordering Number Pin Assignment
Package Packing
Normal Lead Free Halogen Free 1 2 3
19N10-TM3-T 19N10L-TM3-T 19N10G-TM3-T TO-251 G D S Tube
www.unisonic.com.tw 1 of 6
Copyright © 2008 Unisonic Technologies Co., Ltd QW-R502-261.a
19N10 Preliminary Power MOSFET
ABSOLUTE MAXIMUM RATINGS (TC=25℃, unless otherwise specified)
PARAMETER SYMBOL RATINGS UNIT
Drain-Source Voltage VDSS 100 V
Gate-Source Voltage VGSS ± 25 V
Continuous Drain Current ID 15.6 A
Pulsed Drain Current (Note 2) IDM 62.4 A
Avalanche Current (Note 2) IAR 15.6 A
Single Pulsed Avalanche Energy (Note 3) EAS 220 mJ
Repetitive Avalanche Energy (Note 2) EAR 5.0 mJ
Peak Diode Recovery dv/dt (Note 4) dv/dt 6.0 V/ns
Power Dissipation 50 W
PD
Derate above 25°C 0.4 W/°C
Junction Temperature TJ +150 ℃
Storage Temperature TSTG -55 ~ +150 ℃
Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. Pulse width limited by TJ(MAX)
3. L=1.35mH, IAS=15.6A, VDD=25V, RG=25 Ω, Starting TJ=25°C
4. ISD≤19A, di/dt ≤ 300A/µs, VDD≤BVDSS, Starting TJ=25°C
THERMAL DATA
PARAMETER SYMBOL RATINGS UNIT
Junction-to-Ambient θJA 110 ℃/W
Junction-to-Case θJC 2.5 ℃/W
ELECTRICAL CHARACTERISTICS (TJ=25°C, unless otherwise specified)
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
OFF CHARACTERISTICS
Drain-Source Breakdown Voltage BVDSS VGS=0V, ID=250µA 100 V
Breakdown Voltage Temperature ∆BVDSS ID=250µA,
0.1 V/°C
Coefficient / ∆TJ Referenced to 25°C
Drain-Source Leakage Current IDSS VDS=100V, VGS=0V 1 µA
Forward VGS=25V, VDS=0V 100
Gate-Source Leakage Current IGSS nA
Reverse VGS=-25V, VDS=0V -100
ON CHARACTERISTICS
Gate Threshold Voltage VGS(TH) VDS=VGS, ID=250µA 2.0 4.0 V
Static Drain-Source On-Resistance RDS(ON) VGS=10V, ID=7.8A 0.078 0.1 Ω
Forward Transconductance gFS VDS=40V, ID=7.8A (Note 1) 11 S
DYNAMIC PARAMETERS
Input Capacitance CISS 600 780 pF
Output Capacitance COSS VDS=25V, VGS=0V, f=1.0 MHz 165 215 pF
Reverse Transfer Capacitance CRSS 32 40 pF
SWITCHING PARAMETERS
Total Gate Charge QG 19 25 nC
VDS=80V, ID=19A, VGS=10V
Gate Source Charge QGS 3.9 nC
(Note 1, 2)
Gate Drain Charge QGD 9.0 nC
Turn-ON Delay Time tD(ON) 7.5 25 ns
Turn-ON Rise Time tR VDD=50V, ID=19A, RG=25Ω 150 310 ns
Turn-OFF Delay Time tD(OFF) (Note 1, 2) 20 50 ns
Turn-OFF Fall-Time tF 65 140 ns
UNISONIC TECHNOLOGIES CO., LTD 2 of 6
www.unisonic.com.tw QW-R502-261.a
19N10 Preliminary Power MOSFET
ELECTRICAL CHARACTERISTICS (Cont.)
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
SOURCE- DRAIN DIODE RATINGS AND CHARACTERISTICS
Diode Forward Voltage VSD VGS=0V, IS=15.6A 1.5 V
Maximum Body-Diode Continuous Current IS 15.6 A
Maximum Pulsed Drain-Source Diode
ISM 62.4 A
Forward Current
Body Diode Reverse Recovery Time tRR VGS= 0V, IS=19A, 78 ns
Body Diode Reverse Recovery Charge QRR dIF/dt=100A/μs (Note 1) 200 nC
Note: 1. Pulse Test : Pulse width ≤300µs, Duty cycle ≤ 2%
Note: 2. Essentially independent of operating temperature
UNISONIC TECHNOLOGIES CO., LTD 3 of 6
www.unisonic.com.tw QW-R502-261.a
19N10 Preliminary Power MOSFET
TEST CIRCUITS AND WAVEFORMS
D.U.T. +
VDS
- L
RG
Driver VDD
* dv/dt controlled by RG
Same Type * ISD controlled by pulse period
VGS as D.U.T. * D.U.T.-Device Under Test
Fig. 1A Peak Diode Recovery dv/dt Test Circuit
VGS Period P. W.
D=
(Driver) P.W. Period
VGS= 10V
IFM, Body Diode Forward Current
ISD
(D.U.T.)
di/dt
IRM
Body Diode Reverse Current
Body Diode Recovery dv/dt
VDS
(D.U.T.) VDD
Body Diode Forward Voltage Drop
Fig. 1B Peak Diode Recovery dv/dt Waveforms
UNISONIC TECHNOLOGIES CO., LTD 4 of 6
www.unisonic.com.tw QW-R502-261.a
19N10 Preliminary Power MOSFET
TEST CIRCUITS AND WAVEFORMS (Cont.)
Fig. 2A Switching Test Circuit Fig. 2B Switching Waveforms
Fig. 3A Gate Charge Test Circuit Fig. 3B Gate Charge Waveform
Fig. 4A Unclamped Inductive Switching Test Circuit Fig. 4B Unclamped Inductive Switching Waveforms
UNISONIC TECHNOLOGIES CO., LTD 5 of 6
www.unisonic.com.tw QW-R502-261.a
19N10 Preliminary Power MOSFET
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD 6 of 6
www.unisonic.com.tw QW-R502-261.a
