Anyway I think that's mostly sorted the IDF and Egyptians for now, I just have some BTR-60s to paint yet as well as some Israeli recce and TOW jeeps. But more importantly we need to get this stuff out for a game!
Shalom and Youm Sa'id!
Showing posts with label trees. Show all posts
Showing posts with label trees. Show all posts
Monday, June 16, 2025
IDF Infantry Platoons, Halftracks, and some more Egyptian Infantry for the Yom Kippur War! And Palm Trees!
Friday, May 19, 2017
How to make proper Wargame Trees - Quest for a Shrubbery Part 2
Last year I posted all about my quest for proper wargame trees in my post about "The quest for shrubbery". I got lots of positive feedback from our local group about them, and several questions about how to do them online through here and facebook messages. So, since I needed to make more anyway, I decided to create a how to article on how I did it.
A few words of warning though, while none of this is hard to do, it is time consuming. Especially the first few times you do it. I think the first tree I made took me almost 5 hours to figure everything out, that's a lot of time for 1 tree. Now that I know what I am doing and have a system its probably around an hour or two per tree (for 5-6" tall ones), but that's still not insignificant. There is a reason that trees like this commonly sell to model railroaders for between $60 and $200 US each (for 5" through 12" tall), there is a lot of time investment to make them look good. Also the materials to make them are not cheap so the base manufacturing price can stack up quickly too, my current estimate is between $15 and $20 Canadian per tree.
So let's start with a materials list:
Sagebrush makes the perfect armatures for model trees as it grows like a full size tree, but in miniature. The structure of the bark and limbs mimics full size trees almost exactly. You can create trees using any twigs you want, but look closely at the pictures of sagebrush then at the twigs you generally find, if your going to spend your time making something, do it right and start with something that will look real.
Sagebrush is extremely common across the USA, however does not grow near me in Canada so I had to get a hold of some. I came across a website that supplies Sagebrush for model railroaders called Modeltreestore.com. The operator Mike is extremely easy to deal with and will even find branches that look similar to specific real life trees if you send photos! I have dealt with him several times already and he is awesome to deal with. This however is the biggest part of the expense, due in most part to shipping and exchange. It ends up costing about $65 CND to get 10 armatures here, so almost $7 a tree.
Anyway, onto prep. The armatures come from Mike in a large bag in a box as shown above, and should be baked to sterilize them before use. Just through them on a cookie sheet and onto the BBQ on low for a few hours and you should be good to go. You could use the stove but Sagebrush has a strong aroma and most of our wives wouldn't appreciate baking trees in the oven (or at least mine wouldn't, so I didn't even try).
Once baked and dried, you start to work the armatures to clean them up. Just pull all the leaves off and slide your fingers down each branch and pull off all the tiny branches that are loose. You want them all off now, rather than later after everything is together and then starts to fall apart when bumped!
Step 2 - Basing
Now that the branches are prepped it's time to base them. Cut the branch to have a flat surface at the angle and location you want (if not happy with how it came cut) and then drill a small hole in the bottom. Super glue a short length of brass rod into the tree leaving about 2.5 - 3mm sticking out (longer if you are going to use thicker bases or if you are inserting into a foam table).
Next drill a hole in a wooden base (I used 60mm round 3mm thick MDF bases) wherever works best for the tree placement on the base. At this point for any tree over about 4" tall I also glue a heavy and thick washer around the hole on the base (but one that the tree will still fit through the inner diameter of so that it sits flat on the base) to provide weight so it doesn't tip easily when done.
Super glue the tree to the base and let it dry. Then use liquitex to build up the base around the tree and washer and to blend everything together while adding texture all at once.
Step 3 - Poly Fiber
Once everything is dried you can move onto stretching poly fiber over the trees. This is the most time consuming part and needs to be done right to look correct in the end. It will take you a few hours a tree at the start but get significantly faster once you get the hang of it. Take small pieces of poly fiber (I mean really small, like the size of a marble) and start pulling it apart and stretching it. Take a few threads from this clump and twist them around a branch several times. Most of the time if you do this with tension the bark with grab the fiber and hold it tight, if not apply a drop of super glue to secure it. Take another few threads and to it again on another area of the same branch. Once done stretch and pull the poly fiber around that branch until you can barely see it. It should look like a spider web and like it is way to thinned out. Don't worry it will fill in once you flock it, it will amaze you.
I played with the contrast on the pictures so that you can see the poly easily, but its really not that dense. A marble sized clump gets expanded to about 2" cubed.
Continue this process on each little branch or tight cluster of branch ends. You may be tempted to use one big piece and stretch it all over the whole tree at once.... DON'T! It will not look right, it will look like exactly that, one big clump. Doing it one branch at a time takes longer, but looks significantly better. If your in this to do it, do it right.
I also chose to paint the base a basic brown at this point.
Step 4 - Super Leaf
The Super Leaf product is the other big part of what makes these trees look real. Rather than the typical clump foliage or powdery flock this stuff looks like leaf bits. No one around here carries it though so again I had to order. To do it right I got a large container of medium green and a small container of light and dark green. That is enough to do about 20 trees.
Setup an area to spray the trees with the spray adhesive (not watered down glue and a sprayer, this is aerosol based glue and can be found at any fabric shop, Canadian tire, Walmart, etc). and an area to flock the trees (using several sheets of paper to collect the excess flock to return to the container. Start by spraying from the underside of the tree trying to only hit the poly fiber then rotate the tree to get the sides and top of the poly fiber. The poly will turn white once enough glue is on it.
Next flock the poly fiber with the medium green Super Leaf to build the basic bulk of leaf structure for the tree. Simple use the Super Leaf shaker to sprinkle it onto the poly fiber and the glue will hold most of it there. Shake the tree and tap the base to knock off the loose particles and then collect the excess from the paper and put it back in the shaker. If the tree does not look full enough you can play repeat this process a second time.
Time to do that again but this time only spray the poly (and medium green foliage) from the underside of the tree and only lightly. Use the dark green Super Leaf to flock the underside of the branches to provide a shaded look. Again shake the tree and knock of excess and collect it to use again.
One more time, this time only spray the top of the tree lightly and then apply the light green Super Leaf to provide a look of sunlight hitting the tops of the trees.
I chose to do these trees as a normal green shade, but you can just as easily do them in autumn colours or add some light sprinkles of a flower type colour to represent fruit trees in bloom. There are lots of options.
Step 5 - Finishing work
You are almost done now. It is time to paint the base (if you didn't earlier) and then dry brush it so that all the texture from the liquitex shows.
Once that is done I put white glue onto the base in various areas and flock it with normal static grass. If this is good enough for you, you can skip the next paragraph.
Once the static grass has dried I go back and add some more interest to the base with various clumps of flowers and grass from http://www.tajima1.co.uk/, which makes some amazing tufts that add a lot of realism to any project. I added a few bits of heather to each tree base and a few clumps of various sizes and colours of grass as well. Something like 8 - 12 clumps per tree looks about right to me, but you can do more or less as you choose.
Last step here is to clear coat the trees with a satin or flat clear coat spray. Apply a few thin layers allowing each to dry before applying the next. This adds some additional bonding to help keep the foliage on the tree. You can use a few thin layers of the spay adhesive before clear coating them to further strengthen it, but you need to be extremely careful as if put on to thick it will produce a haze effect on the leaves, so while I have tried it, its hard to pull off, so I just use a few thin coats of clear coat.
FINISHED!!!
See, I did warn you that it would take a while. Now you are done though, and have some of the best looking trees for wargaming out there (at least in my not so humble opinion)! While they look better than almost everything else out there, they are NOT super durable. You will need to be careful with them and pack them gently and upright. They are not meant to be used for wargames at all but more for permanent railroad setups. After seeing them done this way though and having looked so long for realistic looking trees, I was willing to deal with that for my own personal use.
As a disclaimer, I can not take credit for coming up with this methodology. This is all based on the work of model railroaders and pulled together from various forums and posts around the internet. I just organized bits and pieces into my own workflow, there are many other smart people that came up with the method that deserve all the credit (I just never kept track of the forums I visited last year doing research so can't provide names, sorry).
The above image shows the scale of these trees, which is what really led me to doing them this way. I got tired of all the store bought model trees which end up being about 3-4 times the height of a model and not really looking like trees in a forest which are huge compared to a normal person. These I think give the right feel for a forest. What is shown are 5 of the smallest trees I did, there are some almost 2x that height and I now have almost 20 complete.
All the trees I have done now are shown here filling a 3'x3' space far denser than you are likely to game with. A lot of work, but I am really happy with the results.
A few words of warning though, while none of this is hard to do, it is time consuming. Especially the first few times you do it. I think the first tree I made took me almost 5 hours to figure everything out, that's a lot of time for 1 tree. Now that I know what I am doing and have a system its probably around an hour or two per tree (for 5-6" tall ones), but that's still not insignificant. There is a reason that trees like this commonly sell to model railroaders for between $60 and $200 US each (for 5" through 12" tall), there is a lot of time investment to make them look good. Also the materials to make them are not cheap so the base manufacturing price can stack up quickly too, my current estimate is between $15 and $20 Canadian per tree.
So let's start with a materials list:
- Sagebrush tree armatures (real sagebrush clippings from http://modeltreestore.com/)
- Super Leaf flock (realistic leaves from http://www.sceneryexpress.com/)
- Static Grass tufts (pre-made tufts from http://www.tajima1.co.uk/)
- Static Grass
- Green Poly fiber
- 50mm - 80mm wood bases
- Washers for weight
- Brass rod
- Liquitex Resin or Natural Sand medium
- Zap (super glue) and White glue
- Spray Adhesive (3m 777 spray glue or Elmer's Spray Adhesive)
Sagebrush makes the perfect armatures for model trees as it grows like a full size tree, but in miniature. The structure of the bark and limbs mimics full size trees almost exactly. You can create trees using any twigs you want, but look closely at the pictures of sagebrush then at the twigs you generally find, if your going to spend your time making something, do it right and start with something that will look real.
Anyway, onto prep. The armatures come from Mike in a large bag in a box as shown above, and should be baked to sterilize them before use. Just through them on a cookie sheet and onto the BBQ on low for a few hours and you should be good to go. You could use the stove but Sagebrush has a strong aroma and most of our wives wouldn't appreciate baking trees in the oven (or at least mine wouldn't, so I didn't even try).
Once baked and dried, you start to work the armatures to clean them up. Just pull all the leaves off and slide your fingers down each branch and pull off all the tiny branches that are loose. You want them all off now, rather than later after everything is together and then starts to fall apart when bumped!
Step 2 - Basing
Now that the branches are prepped it's time to base them. Cut the branch to have a flat surface at the angle and location you want (if not happy with how it came cut) and then drill a small hole in the bottom. Super glue a short length of brass rod into the tree leaving about 2.5 - 3mm sticking out (longer if you are going to use thicker bases or if you are inserting into a foam table).
Super glue the tree to the base and let it dry. Then use liquitex to build up the base around the tree and washer and to blend everything together while adding texture all at once.
Step 3 - Poly Fiber
Once everything is dried you can move onto stretching poly fiber over the trees. This is the most time consuming part and needs to be done right to look correct in the end. It will take you a few hours a tree at the start but get significantly faster once you get the hang of it. Take small pieces of poly fiber (I mean really small, like the size of a marble) and start pulling it apart and stretching it. Take a few threads from this clump and twist them around a branch several times. Most of the time if you do this with tension the bark with grab the fiber and hold it tight, if not apply a drop of super glue to secure it. Take another few threads and to it again on another area of the same branch. Once done stretch and pull the poly fiber around that branch until you can barely see it. It should look like a spider web and like it is way to thinned out. Don't worry it will fill in once you flock it, it will amaze you.
I played with the contrast on the pictures so that you can see the poly easily, but its really not that dense. A marble sized clump gets expanded to about 2" cubed.
I also chose to paint the base a basic brown at this point.
Step 4 - Super Leaf
The Super Leaf product is the other big part of what makes these trees look real. Rather than the typical clump foliage or powdery flock this stuff looks like leaf bits. No one around here carries it though so again I had to order. To do it right I got a large container of medium green and a small container of light and dark green. That is enough to do about 20 trees.
Setup an area to spray the trees with the spray adhesive (not watered down glue and a sprayer, this is aerosol based glue and can be found at any fabric shop, Canadian tire, Walmart, etc). and an area to flock the trees (using several sheets of paper to collect the excess flock to return to the container. Start by spraying from the underside of the tree trying to only hit the poly fiber then rotate the tree to get the sides and top of the poly fiber. The poly will turn white once enough glue is on it.
Next flock the poly fiber with the medium green Super Leaf to build the basic bulk of leaf structure for the tree. Simple use the Super Leaf shaker to sprinkle it onto the poly fiber and the glue will hold most of it there. Shake the tree and tap the base to knock off the loose particles and then collect the excess from the paper and put it back in the shaker. If the tree does not look full enough you can play repeat this process a second time.
Time to do that again but this time only spray the poly (and medium green foliage) from the underside of the tree and only lightly. Use the dark green Super Leaf to flock the underside of the branches to provide a shaded look. Again shake the tree and knock of excess and collect it to use again.
One more time, this time only spray the top of the tree lightly and then apply the light green Super Leaf to provide a look of sunlight hitting the tops of the trees.
I chose to do these trees as a normal green shade, but you can just as easily do them in autumn colours or add some light sprinkles of a flower type colour to represent fruit trees in bloom. There are lots of options.
Step 5 - Finishing work
You are almost done now. It is time to paint the base (if you didn't earlier) and then dry brush it so that all the texture from the liquitex shows.
Once that is done I put white glue onto the base in various areas and flock it with normal static grass. If this is good enough for you, you can skip the next paragraph.
Once the static grass has dried I go back and add some more interest to the base with various clumps of flowers and grass from http://www.tajima1.co.uk/, which makes some amazing tufts that add a lot of realism to any project. I added a few bits of heather to each tree base and a few clumps of various sizes and colours of grass as well. Something like 8 - 12 clumps per tree looks about right to me, but you can do more or less as you choose.
Last step here is to clear coat the trees with a satin or flat clear coat spray. Apply a few thin layers allowing each to dry before applying the next. This adds some additional bonding to help keep the foliage on the tree. You can use a few thin layers of the spay adhesive before clear coating them to further strengthen it, but you need to be extremely careful as if put on to thick it will produce a haze effect on the leaves, so while I have tried it, its hard to pull off, so I just use a few thin coats of clear coat.
FINISHED!!!
The above image shows the scale of these trees, which is what really led me to doing them this way. I got tired of all the store bought model trees which end up being about 3-4 times the height of a model and not really looking like trees in a forest which are huge compared to a normal person. These I think give the right feel for a forest. What is shown are 5 of the smallest trees I did, there are some almost 2x that height and I now have almost 20 complete.
All the trees I have done now are shown here filling a 3'x3' space far denser than you are likely to game with. A lot of work, but I am really happy with the results.
Monday, November 14, 2016
The Quest for Shrubbery...
... Ok, maybe not a real shrubbery, but Trees are close, right?
As most of the local gamers around here know, I have had an obsession with finding some decent trees for the last few years. When I started my World War 1 collection I had the very clear idea of doing the Battle of Kitchener's Wood, which is an early war battle where there were still actual trees standing in the battle field. These were old growth European Oak and Beech and were 30-60 feet tall.
All I had in my collection was a bunch of Woodland Scenic trees that were 3-6" tall and while passable as wargame terrain, they never really looked that great on the table. At 3-6" tall they also didn't look like actual trees next to a 28mm scale figure as in scale they would be 15 to 30 feet tall. What I wanted was something 9-12" tall. I have spent years looking for something that was both realistic looking and cheap (or at least affordable for this cheap @$$ Ukrainian).
Well I finally gave up on buying something pre-made as anything I liked the look of that was used for model train setups cost upwards of $100 per tree! I needed roughly 8-12 for my table so that kind of killed that idea, as while I was tempted my lovely wife would probably kill me if I spent a $1000 on little trees! She is understanding and patient with my hobby spending but not that understanding!
Anyway, I found a method to create my own trees that I believe looks very realistic and is semi-affordable. So, here is what I finally created...
This is obviously just the start of my collection as there are only 4 trees done so far, but I believe it shows what I am going for. They are fairly large ranging from 8" to 11" tall and cover large areas of the table.
In this picture you can see that the tree covers huge real estate both horizontally and vertically. This one is almost 11" tall and is roughly 10" wide at the top, compare that to the building which is 6" wide and 5" tall. Now, this looks like correct scale in my view, unlike the normal woodland scenic trees I have been using.
The trees themselves are made up of real wood that has been baked to dry them out and sterilize them. They are then cut and trimmed to shape and based. Once based I applied a poly fiber mesh to them and then pulled and stretched it out until it was as thin and transparent as a spider web. I then applied spray glue and flocked them several times. I then clear coated them and finished off the basing.
While they are not super sturdy (constant travel and packing may be an issue) they are a lot sturdier than I thought they would be and should hold up well to the occasional packing and travel, and have already been dropped a few times and have held up very well.
Best of all, they work out to be "fairly" inexpensive. Even with all the poly, flock, basing material, spray glue, and clear coating, my estimate is roughly $15-$20 per tree in materials. Time wise it took me about 4-6 hours for the first one, but am now averaging about 2-4 per tree depending on the size. I don't think it will get much faster as you have to be methodical with the poly or it just wont look right.
I may be biased, since they are mine, but.... I think these are some of the best looking model trees I have seen (short of some of the large $200+ model train trees from expert custom builders). Like I said though, I am probably a bit biased, so what are your thoughts?
As most of the local gamers around here know, I have had an obsession with finding some decent trees for the last few years. When I started my World War 1 collection I had the very clear idea of doing the Battle of Kitchener's Wood, which is an early war battle where there were still actual trees standing in the battle field. These were old growth European Oak and Beech and were 30-60 feet tall.
All I had in my collection was a bunch of Woodland Scenic trees that were 3-6" tall and while passable as wargame terrain, they never really looked that great on the table. At 3-6" tall they also didn't look like actual trees next to a 28mm scale figure as in scale they would be 15 to 30 feet tall. What I wanted was something 9-12" tall. I have spent years looking for something that was both realistic looking and cheap (or at least affordable for this cheap @$$ Ukrainian).
Well I finally gave up on buying something pre-made as anything I liked the look of that was used for model train setups cost upwards of $100 per tree! I needed roughly 8-12 for my table so that kind of killed that idea, as while I was tempted my lovely wife would probably kill me if I spent a $1000 on little trees! She is understanding and patient with my hobby spending but not that understanding!
Anyway, I found a method to create my own trees that I believe looks very realistic and is semi-affordable. So, here is what I finally created...
This is obviously just the start of my collection as there are only 4 trees done so far, but I believe it shows what I am going for. They are fairly large ranging from 8" to 11" tall and cover large areas of the table.
In this picture you can see that the tree covers huge real estate both horizontally and vertically. This one is almost 11" tall and is roughly 10" wide at the top, compare that to the building which is 6" wide and 5" tall. Now, this looks like correct scale in my view, unlike the normal woodland scenic trees I have been using.
While they are not super sturdy (constant travel and packing may be an issue) they are a lot sturdier than I thought they would be and should hold up well to the occasional packing and travel, and have already been dropped a few times and have held up very well.
Best of all, they work out to be "fairly" inexpensive. Even with all the poly, flock, basing material, spray glue, and clear coating, my estimate is roughly $15-$20 per tree in materials. Time wise it took me about 4-6 hours for the first one, but am now averaging about 2-4 per tree depending on the size. I don't think it will get much faster as you have to be methodical with the poly or it just wont look right.
I may be biased, since they are mine, but.... I think these are some of the best looking model trees I have seen (short of some of the large $200+ model train trees from expert custom builders). Like I said though, I am probably a bit biased, so what are your thoughts?
Subscribe to:
Comments (Atom)