Challenge Submission #18 - Another Mixed Bag of WW2 Vehicles

 

Last November fellow Conscript Dallas and I were discussing the idea of a France 1940 scenario for Bolt Action. We had played 'The Battle of Stonne' scenario from the Bolt Action campaign book 'Germany Strikes' in October 2021, and were looking at another chance to pit French and German armour against each other. We settled on 'The Battle of Orp' where the 3rd Panzer Division met the 3^e DLM (3rd Light Mechanized Division). A few of the vehicles needed were not in either of our collections, plus I had been looking at ordering some German and Soviet trucks to transport troops on the battlefield, as well as some more early Soviet armour. In the end  I ordered 3 GAZ AAA trucks, 3 T-26 tanks, 3 Krupp Protze trucks, 2 Panzer III Ausf E tanks, and a Hotchkiss H39 tank from Rubicon Models. They arrived just before last Christmas.

 

A group shot of all twelve vehicles

A size comparison of three tanks in the same scale

The GAZ-AAA was a truck produced at the Gorkovsky Avtomobilny Zavod (Gorky Automobile Plant) from 1936 to 1943 as the company's first 6-wheeled vehicle. During that time, over 37,000 trucks of various patterns were built. The Rubicon kits were easy to assemble, and  could be completed with or without a driver in the cab. (I went with the driver option.) It comes with a one-piece tarp that can be snapped into place, so I can field them with the tarp on or off. They will provide some necessary transport for all my Soviet infantry.

 

GAZ-AAA truck with tarps

GAZ-AAA truck without tarps

 

The T-26 tank kit comes with all the necessary parts to build one of ten different variants of the tank, which was based on Vickers E Six Ton. The T-26 entered active service for the Red Army in 1932, and it was used in many conflicts of the 1930s as well as during the Second World War. When production ceased in 1941, over 10,000 tanks of all variants had been produced. Of all the options available, I went with the M1933 turret, and assembled one with a radio aerial along with a commander that came with the Warlord Games BT-7 tanks I had painted in January. 

 

The German Krupp Protze was a truck used by the Wehrmacht to transport troops and tow the 37mm anti-tank gun. While I have a number of German 251/1 half-tracks, the reality is that most Panzergrenadiers rode in trucks. Using Bolt Action rules, the cost of a truck is less than half the cost of a half-track. The Rubicon kits can be built as the troop transport variant, with the tarp either up or down, or to tow the PAK. I built all of mine as transports, so I may end up ordering another as a towing vehicle.

 

The German Panzer III Ausf. E was an early model of that tank armed with a 37mm gun in the turret. It saw service in Poland and France before being replaced by upgraded versions. The Rubicon kits supply enough parts to build one of the E, F, or G variants of the tank. I added a commander that came with the Bolt Action Panzer I tanks I built in December as I liked it better than the one that came with the models. I painted up my Panzer IIIs as part of the 3rd Panzer Division with the Berlin bear symbol on the side of the turret.

 

 The French Hotchkiss H39 was an improved version of the H35. Some models were further upgraded to a longer-barrelled SA38 37mm anti-tank gun. The Rubicon kit is a resin model with enough extra parts to build the French tank with either the SA38 or the earlier Puteaux SA18 low velocity gun, as well as a different cupola if you want to build a version of the tank in German service. 

 

 

Thanks for reading. We are planning on playing the 'Battle of Orp' scenario soon, so stay tuned for the After Action Report.
 

Challenge Submission #16 - Soviet Infantry in Winter Uniforms

 

 

Here is another contingent of defenders of Mother Russia that was completed for the Painting Challenge, specifically 42 Soviet Winter Infantry from the Warlord Games boxed set of the same name. The set consists of five identical sprues of eight figures, plus three weapons sprues, enough to build 40 miniatures. I transferred two additional figures from the Siberian Veterans I did last week to beef up the numbers a bit. They are dressed in either greatcoats or quilted jackets, many wearing mitts, or having them dangle from 'idiot strings'. The selection of heads provided a lot of choice from a variety of fur hats, pilotkas, or helmets, with many of the faces wrapped in scarves. The only criticism I have with the set is that the weapons sprues don't provide enough basic Moisin-Nagant rifles. but I was able to make up the shortfall by carving away telescopic sights, or grabbing rifles from the sprues that came with the box of Siberian Veterans.

These were all painted in my usual style, starting with a dark brown primer. All the basic colours were painted using Vallejo acrylics, followed by a coat of Army Painter Strong Tone Quickshade. At times it was a little tricky getting the brush into the deep recesses. I might try a method I saw on YouTube where all the parts were painted while still on the sprue and then assembled. I used AK Diorama products 'Snow' and 'Snow Sprinkles' on the bases to give them that frosty look. The dead grass is Vallejo Scenery 'Wild Tuft - Beige'. The end result is a platoon of three identical 10 man sections, each with a submachine gun, a mix of Moisin-Nagant rifles and carbines,  a DP-28 light machine gun team, plus some hand grenades and Molotov cocktails, and a section of 9 conscripts armed with rifles, all led by a senior officer with a pistol. Add to that a PTRS-41 or Simonov anti-tank rifle team, ready to engage the Fascist invaders. 

The Bolt Action rules for Soviets allow a free section of conscripts as one of the force selection options, or I can use them to increase the strength of the other three sections up to 12 men, so this group will provide me with some options on the wargames table of either bigger sections, or a free group of 'Grot'. They will be teamed up with my Soviet Winter Support Group and my whitewashed T-34 for a battle in the snows of Russia.

 

A platoon of Soviet infantry in Winter uniforms

Veteran Officer and Anti-tank Rifle Team

Squad No. 1

Squad No.2

Squad No.3

Призывники Фосетт-авеню

 This was the last of my Soviet infantry. The last of the Soviets? Stay tuned for the next submission.

Challenge Submission #14 - Siberian Veterans and Soviet BA-10 Armoured Car

 

More Soviet infantry were completed for the Challenge, specifically 32 Siberian Veterans from the Warlord Games boxed set of the same name. The set consists of four identical sprues of multipose miniatures, enough to build 32 soldiers, plus two metal figures. (I diverted two of the plastic figures, and some of the Mosin-Nagant rifles to my Winter Soviets to beef up the numbers.) You also get a selection of metal heads and arms to add further variety to the figures, such as captured weapons, bandaged heads or hands, Eastern facial features, etc. 

These were all painted in my usual style, starting with a black primer. All the basic colours were painted using Vallejo acrylics, followed by a coat of Army Painter Strong Tone Quickshade. The end result is a platoon of three 9 man sections each with two submachine guns, a mix of Mosin-Nagant rifles and carbines,  a DP-28 light machine gun team, one Tokarev semi-automatic rifle, plus some hand grenades, Molotov cocktails, and a captured Panzerfaust, all led by an officer with a pistol. Add to that a sniper team, a soldier dragging a Maxim machine gun, and a Commissar with a speaking trumpet. 

 

Siberian Veterans defending the approaches to Moscow

Bandaged heads and hands

Bandaged hands and captured Panzerfaust

Captured MP40, Molotov cocktail, and bandaged heads

Sniper team with scoped Moisin-Nagant rifle

Machine-gunner pulling a Maxim and an officer with a pistol

"The man with the rifle shoots, the man without the rifle follows...."

Next we have a Soviet BA-10 heavy armoured car which is a 1/48 model by Uni-Model, another Ukrainian company stocked by my local hobby store. Like the Ace Model kits that I built earlier, these are very detailed and contain a lot of parts that I probably could have left out given that I am building something for the wargames table. The parts lack locating pins and holes to correctly align them, and the diagrams didn't always give a good representation of exactly where things were to be positioned. (One diagram actually had all the part numbers printed backwards. 😱) I also found the plastic to be a bit fragile, and a few pieces broke when trying to carefully cut them from the sprue. In the end I left off the optional tracks from the rear wheels and some of the tiny etched brass parts, and replaced the headlights and the steps outside the side doors with something more robust than provided by the model kit. 

Despite all the trials and tribulations, I eventually got it all together. It was primed black using an airbrush and then painted Russian green using acrylic paint. Highlights and decals were applied, and then the entire vehicle was given a wash of AK Interactive Dust. (In case anyone is wondering what 'А. Невский' means, it is for Alexander Nevsky, a medieval military leader who defeated the Teutonic Knights in 1242.)

 

The headlights were made from round push pins filed flat on one side

А. Невский on the side, just above the rear wheels

The plastic piece to support the step on the side was replaced with florist wire

 There is still another batch of Soviet Infantry in Winter uniforms coming down the pipe. Stay tuned. Thanks for reading.

Challenge Submission #12 - Soviet Army (Winter) Support Group and T34/76

 

Having completed all my PSC Soviet troops in Summer uniform, it was time to move to those dressed for colder weather in front of the gates to Moscow. I didn't get a huge number of miniatures completed this week as I have been experimenting with different materials to get a 'Winter look' to not only the bases, but the tank as well.

First up is a boxed set of Soviet Army (Winter) Support Group sold by Warlord Games. It consists of a Soviet HQ of two officers, a radioman, and a medic tending a wounded soldier, a Soviet Maxim MMG team, and a Soviet 82mm medium mortar team, all dressed for the cold in a variety of greatcoats, fur hats, felt  winter boots, etc. Each of these groups can be purchased separately, but you save $5 by getting the 'package deal'.

All of the minis were painted using Vallejo acrylics followed by the application of the Army Painter Strong Tone Quick Shade. This is pretty much what I have done up to this point with the Summer Soviets. I used AK Diorama products 'Snow' and 'Snow Sprinkles' on the bases to give them that frosty look.

 

Soviet Army (Winter) Support Group

Soviet HQ (Winter)

Soviet Maxim MMG and 82mm Medium Mortar teams (Winter)

 The second item is a 1/48 scale Tamiya T34/76 in Winter camouflage. The kit was very easy to assemble, even though a lot of the track comes as individual links. The chassis is made of metal, so it actually has some weight to it. 

Once assembled, the tank was primed dark brown, and then painted olive green using Tamiya acrylic paint. Since I already have four T34/76s in various shades of green, I wanted to put this one in Winter colours to go along with my Winter Soviet infantry. I first applied AK Chipping Medium to all the areas that I thought would get a lot of wear and allowed it to dry thoroughly. I then applied a heavily diluted coat of white acrylic paint to give it the appearance of whitewash that was starting to wear off. Once that was completely dry, I used water and a brush to remove the chipping medium to reveal the olive paint underneath. Finally I applied AK Interactive Splattereffects 'Wet Mud' to the tracks and underside to make it look like it had been driven during the Rasputitsa. I may decide to add more 'Wet Mud' to the road wheels, but I am calling it done for now.

 

 This is my first foray into Winter figures, and I am happy with the results. Now that I have the method worked out, I will be ramping up production to meet the quotas of Stalin's latest five-year plan.

Challenge Submission #9 - Soviet WW2 Infantry in Summer Uniform

 

This is the last batch of my Plastic Soldier Company World War 2 Soviets, a box of Russian Infantry in Summer Uniform. The box consists of three identical sprues, each consisting of 19 miniatures. Most are one piece moldings, but others have separate heads and/or arms. There is very limited scope to do any variation, but not even close to the multi-part sets from other manufacturers. As with the previous set I have posted, the sculpting lacks a bit in the third dimension, but you can't argue with the price. One can also see where some sculpts were reused with a change of head or switching from a standing to a kneeling position. Also the light machine gun figures were repurposed to become the anti-tank rifle team in the heavy weapons box.

With the exception of the prone figures, I mounted all the miniatures on slotted bases from Games Workshop that I had in my hobby supplies. In a few cases, I had to trim the molded base on the figure a bit smaller so that it would fit the dimensions of the GW bases. (The prone figures were mounted on bases cut from plastic card, but only after they had been painted.) Everything was then primed black with a rattle can. They were painted using Vallejo acrylics from the Army Painter Soviet Paint Set followed by a coat of Army Painter Strong Tone Quick Shade. When it comes to mass armies, this really works for me, as it quickly brings the figures up a notch in terms of appearance.

In each sprue you get 1 senior officer, 1 junior officer, 1 female medic, 7 soldiers armed with rifles, 5 soldiers armed with sub-machine guns, 1 prone light machine gun team, and 1 light machine gun team on the move. The total count is 57 Soviet infantry ready to repel the Fascist invaders

Смерть немецко-фашистским захватчикам (Death to the Fascist-German Invaders)

The four figures below show the limited 'mix and match' ability of the box of figures. You get three minis wearing a pilotka, and three wearing a helmet, along with three pairs of arms holding a rifle, and three pairs holding a sub-machine gun.

 

 

Thanks for reading. More Soviets coming soon.

Challenge Submission #7 - WW2 Soviet Anti-Tank Guns and Heavy Weapons

In my post from last week, we saw a major buildup of my Bolt Action Soviet tank forces. This week we are looking at giving the Soviet infantry some much needed firepower. All of the figures and weapons in this post are from the Plastic Soldier Company's 28mm range, specifically their boxes of 'Russian 45mm Anti-Tank Gun' and 'Russian Heavy Weapons'. 

The Plastic Soldier Company's range are an inexpensive alternative to metal, or even multi-pose plastic figures, although I do find some of the poses remind me of the cheap toy soldiers I owned as a young boy, especially those cast as a single piece. They are fine in length and width, but a bit lacking in depth. All of the figures were assembled, mounted on bases (with the exception of the anti-tank gun crews) and primed black using a rattle can. I painted them using acrylics from the Vallejo Soviet Paint Set. Finally everything was hit with Army Painter Strong Tone Quick Shade. The Quick Shade leaves everything with a glossy finish, so when the weather is warmer I will be taking these outside to give them a coat of matte spray to dull them down a bit.

 

The Russian 45mm Anti-Tank Gun box contains 2 guns and 8 crew figures. Each gun sprue has different barrel options to allow you to build any of the following: 45mm M1937 anti tank gun, 45mm M1942 anti tank gun or 76mm M1943 infantry gun. Since I am current working on an early Operation Barbarossa theme, I built my guns as the M1937 version. The set also contains ammo boxes, both live shells and spent casings, as well as a rifle and sub-machine gun to add to the ambience. Since the bases I used for my guns were getting a bit crowded, I shifted some of the ammo boxes to the medium mortar bases, and the rifles to the machine gun bases.

 

 

The Russian Heavy Weapons box provides you enough sprues to build 26 miniatures and 8 models depicting WW2 Russian infantry heavy weapons as follows: 2 x 3 man Pulemyot Maxima PM1910 machine gun teams firing, 2 x 2 man machine gun teams moving, 2 x 2 man RM-38 50mm light mortar teams, 2 x 3 man M-37 82mm medium mortar teams, 2 x 2 man firing PTRS-41 anti -tank rifles, and 2 moving PTRS anti-tank rifles.

Pulemyot Maxima PM1910 machine gun teams

M-37 82mm medium mortar and RM-38 50mm light mortar teams

PTRS-41 anti -tank rifle teams

 За Родину (For the Homeland) Thanks for reading.

 

Team Yankee 15mm Leopard 2s and BTR-60s + Vallejo Vehicle Paint

One of the things that the pandemic has been good for is ordering stuff over the Internet. What can be hit-and-miss though is the fulfillment of those orders. Back in April I thought to take advantage of some free shipping from Battlefront and ordered some GF9 terrain. I figured I'd add a couple Team Yankee tank sprues just for fun, so I threw in these two Leopard 2s. Well... suffice to say that my order finally arrived in July after having to cancel the first order and re-order the stuff... I guess I should also add that the complete order hasn't even yet arrived, since the two aircraft flight stands I added on were on backorder. I guess it doesn't matter much because there's no sign yet of the two 1/144 SU-25 Frogfoot model kits I ordered off eBay at the start of July... typical.

 

Anyway, the models finally arrived and have duly been built and painted in the same fashion as my other Bundeswehr Leo 2s.

The TY sprues don't come with decals, of course, but I had plenty of Iron Crosses and tactical numbers left over from prior projects. I just had to freehand a license plate for each of the vehicles.

The BTR-60 company came from a local brick and mortar store, so no worries at all about shipping or postage. Super-fast to paint these using the magic spraypaint (Krylon Camouflage Olive) - supposedly it's still in production but I haven't been able to find it anywhere. This lot of five vehicles emptied my last can :-(

 

Anyway, another thing I really like about the Battlefront Team Yankee vehicles is that they come with crew figures as well (are you listening, 1/72 aircraft makers???) I just love the cool character that a crew figure adds to the vehicle.

Cool looking crew eh!

Of course, one good use for these BTR-60s will be to transport the heavy weapons platoon of the Motor Rifle Regiment!

Just such cool little models. All injection-molded plastic and a snap to assemble, while retaining good detail.

I also have to give a shout-out to Vallejo for this paint set, which was a very generous gift from Conscript Perry (thanks Perry!)

I used the Panzer Colours "Dark Rubber" on the tires of the BTR-60s and it really worked a treat - I love the effect. It'll certyainly be my go-to paint for vehicle tires and likely also for Bundeswehr "teerschwartz" (tar black) as used in their three-colour camo pattern.

Anyway, that's it for now... until we can (finally) get gaming together again, stay healthy everyone!