Dug-In Bolt Action Panther Tank

 

--- TRIGGER WARNING - Previously posted to the Analogue Painting Challenge Blog ---

 

Visitors to my house will likely recognize this model - it's been sitting on the sideboard primed for two years? Three years? Since the Earth began to cool? Who knows. But it's painted now. (In fact it had some grey drybrushing on the pavers but I re-primed over that a couple days ago). It's the "Dug-In Panther" model from Warlord Games' Bolt Action range. Can't remember where I got it (someone gave it to me as I know I'd never have bought it) but it's kinda neat all the same.

It's a resin casting, base and turret separate. The idea here of course is that the Germans have dug in a Panther tank basically as a bunker. Presumably the tank was nearly out of fuel with no chance of resupply, or suffered some nearly terminal mechanical problem, so the defenders dug a shallow ditch in the middle of the street, drove it in, and piled the paving stones back up around it.

I painted it in three-colour camo - base is GW Tallarn Sand, the green is Castellan Green/Death World Forest, brown is Vallejo Dark Brown/Steel Legion Drab. Then the model was washed with Agrax Earthshade, the dunkelgelb highlighted Tallarn again, and some sponge chips applied with AK German Camo Black-Brown.

 

The engine was done Mechanicus Standard Grey with Nuln Oil. Paving stones AK Dark Rubber/MSG/Dawnstone/Celestra Grey, and dirt started Rhinox Hide up through Dark Brown to Steel Legion Drab.

Honestly I can't see a great deal of use for the model on our gaming table as most of our WW2 games are set in countryside. But if we have a Berlin '45 game (ever) this will look pretty cool, as the Volkssturm gathered around it demonstrate.

Onwards and upwards! 

Bad Squiddo Soviet Sniper Team

Well, winter has certainly arrived on the Canadian Prairies so why not reflect that with some quick painting. Accordingly here are a couple of models to get in before the start of the Analogue Hobbies Painting Challenge (16th edition). It's a lovely pair of female Soviets from Bad Squiddo games.

These came in an order I won't be repeating... I picked up the Israeli unit cards for "Fate of a Nation" and the excellent Battlefield in a Box set of 15mm railway tracks, and saw these models on the site and popped them in the basket, as one does. Then I got to the checkout and found that the store didn't ship to Canada. I even asked them by email and they said they wouldn't. Usually I would have stuff such as this sent to a parcel business in Pembina ND and drive down, but with the current state of "relations" I'm not anxious to visit our neighbours. So I asked Pam's cousin if he would accept the package and forward it on. He said he would, so far so good.

The parcel duly arrived at its US destination and was forwarded... cost of postage to Canada, $47USD (this is for $70USD worth of stuff). To add insult to injury, CBSA relieved me of a further $22CAD in duty upon receipt. So I ended up paying nearly as much in postage and duty as the goods themselves cost. Like I said, I won't be repeating that escapade.  

Anyway... the figures are lovely and well-cast with hardly any cleanup required. I painted them in the standard Soviet scheme of Khaki/Tallarn Sand with Dark Rubber boots and Doombull leatherwork. Not much to these and I like the result. They'll be a good addition to my Soviet winter forces.

The Challenge starts in one week and I have something in mind to start it off, it's just a matter of whether I can hold off till then!

Some Military Horology!

From time to time (heh) on this blog I digress into different subjects unrelated (or only tangentially related) to wargaming. One of my many non-wargaming hobbies is horology... the study (and in my case, collecting) of watches. Combining this interest with another of my interests obsessions, military history, makes for an fascinating intersection.

This is a lovely piece isn't it! It's a Heuer "Bundeswehr" 1550 SG flyback chronograph. These were issued to the Bundeswehr (German Armed Forces) in the Cold War - particularly in the 1960s and 70s.

The case is stainless steel of course, you can see the four fixing screws right next to the lugs. The Bundeswehr item number is stamped on the caseback, note that this isn't the serial number... that is stamped on the side of the case between the lugs.

On the other side of the case is the manufacturer's model designation - 1550 SG.

The watch came from the seller on a very nice grey leather strap but I immediately ordered an NOS Bundeswehr strap from Jurgen's in Germany.

The strap design is now commonly known as "Bundeswehr" due to its association with this watch. It's a three-piece leather item - a two-piece buckled 20mm strap attaching to the watch between the lugs as usual, and the third piece being a flat oval leather pad fitting underneath the watch case. Supposedly this is due to the watch being used by pilots in the Bundesluftwaffe (air force) where the temperatures in the cockpit could vary from freezing to very hot, and the leather pad was supposed to insulate the pilot's wrist from the hot or cold stainless caseback.

  

Accession number stamped on the strap as well.

Here's a better view of the full strap.

I really like the dial design of this watch. The bezel rotates of course, to keep track of elapsed time. The subdial at the left runs the seconds, the subdial at right keeps track of chrono elapsed time up to 30 minutes, and the chronograph second hand (seen at one o'clock here) is started and stopped by the top pusher, while the bottom pusher resets the chrono second hand from being stopped. HOWEVER... if you push the bottom button while the chronograph is running, the chrono second hand flies back to 12 and restarts automatically. Hence "flyback".

The "3H" in circle is typical of the Bundeswehr issued watches, it signifies that the markers and hands are coated in tritium, which glows in the dark ("3H" is the chemical symbol for tritium, 3 is the mass number and H is for hydrogen of course). Just so there's no mistaking this there is also a tiny "T" over the 6.

Of course there's prominent "Heuer" branding here as this watch predates the 1985 acquisition of the company by the TAG Group, the watches thereafter being branded TAG Heuer.

The Bundeswehr strap makes the watch wear even larger than it is and my wrist isn't huge, so I've been wearing the watch on a one-piece nylon NATO strap.

I was really happy to pick up this watch as I've wanted a Heuer Bundeswehr flyback chrono for years, it was one of my grail watches. They're not that rare but there is a really weird variation of the piece called the "Sternzeit Reguliert" (regulated star-time) that was used by the artillery and was set to "sidereal time" (based on earth's motion relative to distant stars rather than the Sun). A sidereal day is 23 hours, 56 minutes and 4.1 seconds. Try that as your excuse next time you're a few minutes late for a meeting ;-)

I find this stuff fascinating, but if you want a deep dive into the Heuer Bundeswehr watch you can have a look at this site.

Next up is the watch I wear when doing Great War living history. It's a "Queen Anne" hand-winder from West End Watch Company. This is also a fully original piece.

The strap is great, it's from vintagewatchstraps.com and this guy is a real artisan. I sprung for the hallmarked sterling silver buckle and it is just lovely.

Some honest wear on the dial here but the watch winds well and keeps reasonable time at events. The Great War was the real origin of the men's wristwatch and the start of a fashion that survives to this day. Strangely enough, for a time after the war, some veterans resented civilian non-veterans wearing wristwatches - stolen valour! Pretty wild stuff.

Moving forward about 25 years, here's a Swiss watch issued to the German army in the Second World War. The Germans made use of a lot of Swiss watches for their armed forces, including this example by ARSA (A. Reymond SA). It's a handwinder too, as all of these watches are, and is marked "Watertight", "Shock-resistant", and "Anti-magnetic" on the face. All of these properties are important in a military watch, as magnetic fields can affect the running of the watch.

What marks this watch as military issue is the stamp on the case - "DH" stands for Deutsches Heer, the German army. The serial number is stamped between the letters.

Here's a pocket watch from the same maker. My wife got this for me as a wedding present. 

Also "DH" marked, naturally. Nice watch but not many people wear pocket watches anymore do they!
 

Lastly here's a cool RCAF (Royal Canadian Air Force) service watch by Waltham. Like the ARSA wristwatch it's pretty petit by today's standards but it's in very nice condition with what I believe is an original nylon strap.

Military accession number on this one as well (I think the /42 indicates wartime issue) but it's the paperwork that came with it that's really remarkable...

Check this out, original Air Force paperwork! "Requires overhaul"

Here's the evidence it was overhauled... in 1965! Who says the military is wasteful... this watch may have been in service for over 20 years.

Tested and accurate to within 30sec/day... it's no quartz watch or iPhone but not bad for an old hand-winder - keep in mind that the "COSC standard" for accuracy of mechanical watches established by the Controle Officielle Suisse des Chronometres is -4s/+6s per day. I only have one chronometer in my collection (a Tissot Janeiro chronograph) so I'm not super-fussed. These watches are of interest for their intricate mechanical function and aesthetic appeal, not their super-accurate timekeeping.  

Anyway I hope you enjoyed this digression and if you are worried about spending money on awesome watches, you should really stay far away from chrono24.ca!

Battlefront Afrika Korps 88mm AT Guns

Well if you're creating an Afrika Korps force for battles in the Western Desert, there's kind of one thing that you HAVE to have, and that's Flak 36 88mm anti-aircraft/anti-tank guns, full stop. The 88 is so synonymous with the DAK it would be odd to have a game without them. So as a quick couple-day project I decided to paint a couple for the game this week.

 

These are excellent plastic models from Battlefront. The crew models are that kind of soft-ish resin models you get on sprues from BF, not injection molded hard plastic.

A couple of the crew figures were standing at a crazy angle on their bases but a hot water/cold water dip and plunge straightened them out. The crew are really characterful and detailed.

 

The sprue also contained some extra bits like ammo cases and shell casings which look cool on the bases.

I painted the guns with a base of XV-88 and painted them over with a mix of Tallarn Sand blended with Deck Tan just to lighten it up a bit. I then washed with Agrax and chipped with German Camo Black Brown.

The crews were painted in my standard German way - base Khaki, wash Agrax, then tune up some random jackets and pants with lighter tones.

These should do some damage in the game on Thursday, so anyway...

Heia Safari!
 

Forged in Battle Afrika Korps Rifle Company for Flames of War

It's all very well and good painting tanks, but in my opinion, if you want a proper WW2 game, you need infantry. Such it is with Flames of War. A couple weeks ago I finished the 8th Army infantry company for my upcoming birthday game, so now it's the turn of the Afrika Korps models to go under the brushes.

The models are mostly from Forged in Battle with a few from Peter Pig in the command stands. Above are the two company command stands. The models on the right-hand stand are Piggies, I might've swapped a head on the pointing Major.

The rest of the FiB models are quite good - albeit after a complaint about the ones I initially received being terribly miscast and horrible. But to their credit FiB sent me a new pack from "new moulds" and they were pretty nice models.

Unlike the 8th Army dudes there's quite a bit of contrasting detail to paint on these models. The uniforms are Vallejo Khaki washed Agrax, the helmets are AK Light Earth likewise, webbing and straps are Light Earth, wool covers on the canteens are AK Dark Brown or New Wood, rifles are Leadbelcher, Dark Brown and New Wood, slings are Doombull Brown, shovel handles and boots are New Wood. On the officers and some of the men I randomly lightened the DAK caps, tunics or trousers just for a bit of variety.

 

In the FoW list each infantry platoon can have an MG34 machinegun base, so I painted one for each platoon (partly to compensate for the lack of the 2.8cm sPzB41 squeeze-bore antitank rifle that FiB doesn't make). As for the sPzB41... honestly I don't really understand why BF made one an organic part of each DAK infantry platoon. I didn't think they were that widely used (fewer than 2,800 were manufactured during the entire war) and one rarely comes across a mention of it in histories of the desert war... but I stand to be corrected in the comments.

ANYWAY... part of the DAK infantry company list is a platoon of 5cm PAK38 antitank guns. These are from FiB and come two in a pack with crews. The model itself is only two pieces (the barrel is separate) and the trails have the same "wide stance" as the 8th Army 6-pounders, which requires custom-made bases. But they are pretty good models nevertheless, although I think I had to replace the head on one of the crewmen as the original model came wearing a pith helmet (!). The Peter Pig pack of German heads has come in very handy in this project.

 

All in all a very nice set of DAK infantry from FiB. Anyway with the DAK infantry from Battlefront being AWOL these are recommended. The other great thing about this project is using up the spare Flames of War medium bases I've had in a box for well over 10 years!

Here's the entire German contingent I've painted so far. There's still some to paint - more Pzkpfw IVs and some 88mm Flak 36 AT/AA guns - but the impetus for those is reduced somewhat now that I've gotten the infantry painted. Looking forward to the game next week, on which I will duly report!

Heia Safari!

Forged in Battle 15mm 8th Army Infantry

I've now (mostly) finished the infantry company for my 8th Army in the Western Desert project. I do have some Vickers MMG teams and 3" mortars, as well as a couple stands of Boys AT rifles and 2" mortars, yet to complete but I wanted to post these models up.

 

The great majority of the models are from Forged in Battle, a UK manufacturer you might know better as West Wind - why the name change I'm not sure. I say "the great majority" because a couple Peter Pig models have snuck into the company (the pistol-armed platoon commanders). More on this later.

 

You'll notice that the models are based for Flames of War... so you might well wonder why I didn't just use Battlefront infantry. I sure would have liked to do that - but they are unavailable. From anywhere. I even emailed BF directly to ask when they would be back, and I was told that there were no plans but my request would be "passed on to the production team." Take that for what you will, but my experience with BF is that they're a hot mess.

 

There are a couple other options for 15mm 8th Army infantry - Peter Pig, Command Decision - but I chose FiB because the painted models on their website looked absolutely gorgeous. I was happy to paint these models, I think they look pretty great, but while it came good in the end, getting this order from FiB wasn't exactly straightforward.

I put in a large order of both British and Germans - a large infantry "platoon pack", a pack of MMGs, a pack of mortars, and a pack of two AT guns, for each side. The FiB shipping caluclator led me to a workaround as adding one more pack doubled the shipping... so I ordered one pack of AT guns as a separate order. That's additional hassle for the retailer for sure but a poor customer experience when the shipping doubles by adding one pack of models. Anyway...

  

The models arrived in "reasonable time" (I followed up with them once IIRC) and while many of the castings looked quite nice (including these 8th Army infantry) some of the castings were absolutely appalling (the German infantry and MMGs). I did communicate this back to FiB and their representative was very apologetic (apparently the molds were worn out and due for replacement). She offered to replace the bad castings and I heartily accepted that offer.

I also requested some missing poses from the British MMG packs (I only received one gunner figure for the four MGs) and the reply was somewhat puzzling... basically I was told that packs contained a random assortment of models. I get that in an infantry pack you might not get identical numbers of every pose (I didn't), but surely you need to include four actual gunner models in a four-machinegun pack!

In due course the replacement Germans arrived but FiB had forgotten to send the machinegunners. They eventually did send them but from start to finish the order took several months.

ANYWAY... I really like the British infantry (with a couple exceptions - the Thompson sub-machinegun carried by the NCO (photo below) is terrible-looking, and the Christ-like officer (all he's missing is a cross) is just strange and was left unpainted - hence the Piggie replacements. However the rest of the infantry models are all quite good, the equipment looks great, and the poses are all really useful. There are three prone Bren-gunners and number twos included, plus a prone Boys AT team and 2" mortar team. All really good stuff. 

Painting: helmet and uniforms AK Light Earth, washed Agrax and re-highlighted. Flesh Doombull Brown highlighted Cadian Flesh, socks Steel Legion Drab, rifles Leadbelcher, AK brown, highlighted New Wood. The webbing was left LE with the Agrax wash and the contrast obtained by highlighting the uniform around it, if that makes sense. Rifle slings are Deck Tan which I may tone down a bit as it's pretty light. For the groundwork I mixed Medium Brown into the basing gel and wet-brushed it up with AK Khaki and finished with a Deck Tan drybrush.

So my goal now is to get the rest of the infantry painted in the next month, with a target of having a game on Thanksgiving weekend. I'll keep you posted on progress. As for Forged in Battle... well it was an experience. The models I got were pretty nice but it took a lot of effort to get them - something I'm not really used to as a customer of an established business. The FiB representative was very friendly, responsive and accommodating of requests but honestly, most of the requests shouldn't have had to have been made in the first place. Worn out molds should be identified and replaced before miscast figures are sent to customers, and packs of special weapons should contain all the figures needed to crew them. Thankfully it all worked out in the end.

Toodles!