AHPC XV Submission #5 - Soviet Casualties, Star Wars Characters, and some Special Themed Minis

 This submission is a bit of a mixed bag consisting of wide variety of different miniatures. 

First up is a group of eight 28mm Soviet casualties in Summer uniforms by May '40 Miniatures that I picked up at Historicon last July. Having done a set of German casualties as pin markers last year for AHPC XIV, I thought I would expand my collection with additional markers for some of my other Bolt Action armies. Alas, I could only find the Soviet casualties among all the dealers there. 

The bases were cut from old dining gift cards, and a small box was made to accommodate a die at one end. I then built up the base with Spackle and pushed a figure into it while still wet. Once the Spackle was dry, the figures were then removed and the base covered with sand and painted with craft paints. The figures were primed black with a rattle can and then painted using Vallejo acrylics and Citadel washes before being glued back onto the bases. As a final touch, I added some grass flocking and a few tufts of vegetation. 

All eight pin markers

A close up of two of the poses

A close up of the other two poses

Next we have some Star Wars characters by West End Games that were done for some specials themes as part of Dante's Divine Comedy. The figures of miniatures of Darth Vader, Luke Skywalker as he appeared in 'Return of the Jedi', and an Imperial officer have been languishing a box with other Star Wars minis, glued on 1 inch washers and with sand added to the base. They were primed black with a rattle can, and then painted with Vallejo acrylics and Citadel washes. Lots of black, dark grey, and grey, followed by Nuln Oil.

The last of the Star Wars figures is one of Obi Wan Kenobi on Tatooine. He was painted with Vallejo acrylics (Flat Flesh, Dark Sand, Chocolate Brown, Stone Grey, White) followed by Citadel Reikland Fleshshade on the face and hands, Army Painter Mid Brown Wash on the robes and cloak, and Army Painter Blue Tone on a white base for the light saber. 

The last two figures are ones associated with some special themes drawn from Dante's Divine Comedy, specifically those of Lust and Gluttony. I didn't have anything in my existing inventory to fit the bill of Lust, but was able to find an inexpensive stl file on MyMiniFactory of a Succubus with Chain Whip, that was also described as a Lust Demon. A friend printed the figure for 28mm scale, although it actually stands 32mm tall. The detail is very fine, and the wings and chain whip are quite fragile. I can't see this lasting very long on the tabletop before something gets broken. It was primed black with an airbrush, and then painted (very carefully) with Vallejo acrylics. I kept the palette simple with shades of red and black/dark grey. Here's the final result.

 

The next Circle of Hell was Gluttony. Again I didn't have anything in my stash of 'great unpainted', but was able to find another stl on MyMiniFactory of a fat lord on his throne stuffing his guts. This is a 40mm figure that comes in three pieces - the base, the throne, and the fat lord, which definitely made it easier to paint on the detail. The pieces were primed black with an airbrush and then painted with Vallejo acrylics with a few Citadel washes. Once completed, the separate parts were glued together. Here is our fat town lord with a drumstick on one hand and a goblet in the other, while a broken wine bottle lies at his feet.

 Thanks for stopping by.

Analogue Hobbies Painting Challenge XIV #6 - Star Wars & Science Fiction

 As part of last year's painting challenge I completed an assortment of retro Star Wars miniatures that were sculpted by Nevile Stocken of Archive Miniatures within weeks of the first Star Wars movie hitting the theatres. Alas, Stocken couldn't get a licensing agreement, and the line was modified to become 'Star Rovers' with enough changes made to circumvent copyright. These were a gift from a friend who got them from the estate of a mutual friend who had passed away. A total of sixteen figures consisting of Obi-wan Kenobi, Greedo, R2-D2, a Tusken raider, four Jawas, and eight Stormtroopers. With the exception of the Jawas, the figures stand 32-34mm tall. Obi-wan's light saber, and the gaffi stick of the Tusken raider  had broken off at some point. I rebuilt them using lengths of florist wire.

I was initially going to build the structure in the background as a Gondorian tower for Minas Tirith, but the materials I had weren't giving off the right vibe. I decided to add another building to my Tatooine collection instead. It stands 8" tall and the base is 8" on a side.

Somewhere in Mos Eisley

 

Stormtroopers

Tusken, Kenobi, Jawas, Greedo, and R2-D2

More Stormtroopers

 

 The last of the Stocken figures is a Bunny Stormtrooper, one of a variety of modifications to the original sculpts made to avoid copyright infringement. It could easily be converted back to a normal Stormtrooper by snipping off the ears, tail, rabbit teeth and toes. Unfortunately there was only one of these in the bag of minis my friend gave me.

In addition to the Archive miniatures, I also painted up two old-school 25mm Star Wars miniatures of Han Solo and Leia Organa from West End Games. They were painted with Vallejo acrylics, with a wash of Citadel Reikland Fleshshade on the skin areas. In the background is a plastic model kit released by MPC for 'The Return of the Jedi' which is approximately 1/78 scale. A bit small for the figures, but it works well on the game table.

 

Keeping with the Science Fiction genre are two female troopers from the Eurasian Solar Union by Ground Zero Games. I picked these up off eBay years ago with plans to add them to the mix of various manufactures that I painted up as my planetary militia. I had done a few of these for a previous challenge, and I used the same colour scheme using Vallejo acrylics and Citadel washes.

Lastly I painted up five resin cast vehicles from Scotia Grendel, consisting of two of their tracked Sci-Fi APCs and three of their wheeled A.T.A.C. APCs. I had purchased these at least fifteen years ago when I was still running an after-school wargames club, and I needed more vehicles for the large number of students who attended. In the end, I never found time to paint them and, after I retired, there was little incentive until now. Once again, the Painting Challenge has provided the necessary motivation to paint up items that have resided in a storage box for over a decade. 

The wolf's head on the back of the tracked APC is actually detail that is cast on the model in slight relief. I painted them white on both vehicles. 

A group shot of all five vehicles

6-wheeled APC, right side and front

6-wheeled APC, back and left side

Tracked APC, front and left side

Tracked APC, right side and back

 All of the figures and vehicles in this post were done for various themed challenges associated with the Challenge Library - Children's Books, Manga and Graphic Novels, Romance,  Science-Fiction, and Lady Sarah's Library Cart. It will be interesting to see what themed tasks will be presented in this year's 'Divine Comedy'.

Analogue Hobbies Painting Challenge XIII Submission #7 - A Short Trip Around the Challenge Studios

 Having completed 'Under Construction' and 'Black and White', I decided to hit the Sci Fi studio next for 'Destination Moon'. I found two highly appropriate miniatures in my retro collection that were wearing spacesuits that looked a lot like the ones worn in the movie. I have no idea who the manufacturer is, so if anyone out there recognizes them, let me know. Like a lot of my minis, I glued these to 25mm fender washers, and added some sand as groundwork. They were then painted using Vallejo acrylics, with the exception of the Partha True Blue. Once again the special challenges are getting me to paint figures that have been sitting in the pending box for a long time.

 

My two astronauts with their rocketship in the background

 

Front View

Rear View

  The next figure is a vintage West End Games Rebel Commando figure that I have painted up in the colours of my planetary militia using Vallejo Gunship Green and a wash of Biel-Tan Green.

Front View

 

Front View

 

 The last stop is the High Adventure studio where we are going to film an adaptation of H. Rider Haggard's novel 'King Solomon's Mines'. Our figure is the Big Game Hunter with Shotgun from Grenadier Models 'Call of Cthulu' range. This miniature dates from 1983. It was glued to a fender washer, sand was applied to the base, and it was primed black with an airbrush. The main colours used are Vallejo Flat Flesh, Khaki Grey, and Leather Brown. Iraqi Sand was used for the pugaree, Beige Brown for the gunstock, and Gun Metal for the shotgun barrels. Citadel Reikland Fleshshade was used on the skin areas, and Agrax Earthshade for the rest of the model.

 

The mighty hunter facing a 'charging' elephant

 

Front View

Rear View

 As I wrote at the beginning of this post, the Special Challenges within the AHPC provided some incentive to paint up a few more of the oddball minis that have been sitting in my storage boxes for a while. I am not sure if I will ever have a need to place these on the tabletop, but they were fun to paint. Thanks for reading.

Challenge Submission #13 - A Handful of Special Challenge Targets

 One of the features of this year's Analogue Hobbies Painting Challenge is the Challenge Quadrant, consisting of three rings of planets surrounding a central star, each planet representing a special theme for the figures to be painted. Here are some of those special figures that I completed in late January and early February.

 The figures of Gandalf the White on foot and mounted on Shadowfax are the older Games Workshop Lord of the Rings castings. I have included Gandalf the Grey in the photos for the 'Before' and 'After' comparison.

A Canadian Churchill tank at Dieppe -Churchill Mk III T68696 'CAT' is a repainted 1/50 Solido diecast model I acquired from a friend. It was originally painted in a desert yellow/olive green striped camouflage pattern for service in Tunisia, but I wanted it to match another Solido Churchill that I had that depicted 'Cheetah' (shown in the background). So the 'tank from Tunisia' was repainted using Vallejo Dark Earth, and then the vehicle name, numbers, etc. painted on freehand.

 A legionary of early Imperial Rome, equipped with lorica segmentata, gladius, and scutum. This is a 28mm plastic figure that came as a sample years ago with an issue of Wargames Illustrated. I was never sure what to do with it, and thought I might use it as a gladiator in our 'local arena'. I'm glad I had it on hand for one of the stops on the Challenge Quadrant.

 A Eurasian Solar Union SAW gunner from Ground Zero Games and a Rebel Commando from West End Games. Both date from the mid to late 1990's. I have painted them up in the colour scheme for the Ral Partha Galactic Grenadiers figures I use as 'Planetary Militia'. In the past I have used both GZG and WEG minis to augment the variety of poses and weapons in my squads.

 

 A 54mm miniature from the Scale Link Ltd. WW1 Grand Guerre range, which depicts a British or Canadian infantryman advancing at the 'Trail Arms' position with fixed bayonet, and his Small Box Respirator worn at the 'Alert' position. He is identified as a member of the 27th Battalion CEF by the blue circle over a blue rectangle on his shoulder. The figure was painted using Vallejo acrylics, followed by some Games Workshop washes. Finally some AK Interactive Spattereffects 'Wet Mud' was applied to areas like knees and elbows. 

  Two 'old school' 25mm Star Wars figures from West End Games depicting Princess Leia Organa as she appeared in 'A New Hope' and 'Return of the Jedi'. Again, these are painted using Vallejo acrylics with GW washes on the faces and hands, and to produce the camouflage pattern on the poncho.

 These special challenges have been very useful in clearing out some of the miniatures that have been lingering in the 'PENDING' box for some time.

Thanks for reading.