Tornado Warning!

Something completely different done on a whim... it's back to Team Yankee and the Bundesluftwaffe. Long version: Conscript Greg was planning a visit to the Meeplemart and I noted that they had the "new" Team Yankee Tornado flight in plastic, in stock, for the very reasonable price of $35CAD (as opposed to the old resin aircraft that were an extortionate $53 for two). I thought I might ask Greg to get these for me, but I already have one painted Tornado... and there's no need to have three. However I'd had a Revell plastic Tornado kit on my eBay watchlist for some time and this was the prompt to finally buy it, for well under $20 shipped. 

So last week the kit arrived and was quickly assembled. I left off some of the bits specific to the "ECR" version and built it identical to its squadron mate already in my collection.

Painting was pretty simple - it's a three colour scheme - I just copied it from the plane I'd painted before. However I just tried to look up "Wings Palette" where I'd sourced the scheme in the first place... and nothing - the site seems to be defunct. Too bad as it was an amazing resource for aircraft color schemes :-(

Anyway the Luftwaffe Tornados are in a three-colour scheme - I painted this in black highlighted Dark Rubber; Castellan Green; and Castellan Green highlighted Death World Forest; the whole thing then washed with Nuln Oil. 

Here it is with its squadron-mate, not a bad match despite the fact I had failed to record the colours used on it. Happy to finish the second Tornado to join the first, and that'll complete the Bundeswehr's air support for Team Yankee.

15mm "Gvozdika" (Carnation) 122mm SP Gun Battery from Zvezda for Team Yankee

I got a real surprise in the mail a couple days ago. Back in early July I'd ordered some Zvezda models from Evgeniy, a Russian eBay vendor. By late September it seemed clear that the models were lost and weren't going to arrive, so I sought and received a refund from eBay - at the same time promising Evgeniy that if the models ever did show up, I'd pay him again for them.

And can you believe it - they finally did show up - three 15mm (1:100) 2S1 "Carnation" 122mm SP howitzers. They're push-fit models that go up very quickly, but of course have the standard drawbacks of push-fit models - they can be a bit fragile in assembly. (Yes I did send money to Evgeniy for which he expressed deep gratitude)

The models themselves are reasonably detailed and paint up quickly. The surface detail takes well to the standard Magic Russian Spraycan + Agrax Earthshade + Ushabti Bone drybrush. 

I added some weathering with Doombull Brown rust marks and Leadbelcher chips, plus some spare Team Yankee Russian decals of course.

In terms of cost, the three vehicle kits cost me $21.70 USD including shipping from Russia. This compares favorably with the Battlefront box, which tallies at $41.50 USD (before shipping) but includes unit cards. The battlefront models are resin and metal multimedia kits which you may prefer, or not, to injection-molded plastic kits. The barrels on the Zvezda models can be elevated though, unlike the Battlefront resin. Delivery from Battlefront may or may not be speedier and more reliable than Russian post...

The Zvezda kits will be perfectly useable when if we can ever have games again. Game stats for the models are included in the current Red Thunder book and the forthcoming Soviet army book, of course. Let me just say that an artillery template combined with direct fire anti-tank capability (a very respectable AT21 at up to 24") can come in quite handy.

So that's another Soviet unit for the shelf. Hope everyone is staying healthy and sane.

T-80s and BMP-3s for Team Yankee

As Team Yankee fans are probably well aware, Battlefront has re-jigged and re-branded the game - it's now "World War III Team Yankee". No big deal really, but the exciting thing is the new value-priced "Starter" box set with two new types of Soviet armoured vehicle - the T-80 tank (four models) and BMP-3 infantry fighting vehicle (two models) - plus T-64, M60 and Abrams tanks and Bradley IFVs. Sixteen vehicles come in the box for $60 CAD - that's a steal.

Anyway, I've now assembled and painted the T-80s and BMP-3s as part of continuing Soviet escalation. Both models are simple and straightforward to assemble, as usual from Battlefront. I basecoated the T-80s with Krylon camo spray (a can bought on eBay arrived last last week) and applied a camo pattern with stippled Zandri Dust. As usual the vehicle was washed with Agrax Earthshade and lenses picked out after that. Decals were applied to the turret and some Ushabti Bone applied - done. As these vehicles are the Soviets' latest and greatest I didn't do any significant weathering. They're fresh to the front.

And wow - the game stats for these beasts are staggering. Not only are they equipped with an excellent 125mm main gun with an Anti-Tank rating of 22 and Firepower 2+, they can also deploy an optional AT-11 "Sniper" ATGM, also with AT of 22. The Sniper also incorporates an ERA-defeating tandem warhead. Both weapon systems can be fired on the move.

The T-80's armour package also represents a significant upgrade over the T-64, with front armour of 20 and explosive reactive components that upgrade side armour to 16 versus HEAT munitions.

They're certainly not cheap though, at around 8 points each.

I'm no expert on Soviet armour, but from what I've read a consensus appears to be that the T-80's game stats may be somewhat optimistic when compared to reality. However, I can certainly see Battlefront's point in doing this - presumably not all Soviet players want to always field hordes of T-72s or T-64s, and upgrading the T-80 gives them a viable option to field against Leopard IIs and Chieftains/Challengers in a non-horde list. This is OK by me, as after all, it's just a game.

The other new vehicle model included in the box is the BMP-3. This recon vehicle brings some neat capability to the table as well.

Armed with a 100mm gun (meh) and even better, an AT-10 Stabber ATGM (AT of 21!) the BMP-3 can ambush NATO tanks with the best of them. However one cool carryover on the BMP-3 is the 30mm 2A42 gun with ROF 3/2, AT10 and anti-helicopter capability.

The two BMP-3s in the box were also basecoated with Magic Spray and weathered with some watered-down Doombull Brown rust streaks and Leadbelcher chips.

Generous amounts of crew were provided in the box as well - but no decals. However if you're a regular purchaser of Soviet Team Yankee models you'll no doubt have plenty of spares on hand.

The BMP-3s have some very clever antenna mounts cast into the turret (I think they would just fit broom straws perfectly) but I haven't decided yet whether to employ them.

Great detail on the BMP-3 as with all Team Yankee plastics! Like the T-80, it seems that Battlefront has prioritized bringing out some new toys for the Soviets despite thin historical evidence for their use...  while it supposedly entered service in 1987, the BMP-3 only broke cover in deployment with the Soviets in 1990. I guess that's close enough to our time period.  

Anyway I hope you enjoyed the post. Get out there and grab the new Team Yankee starter box if you want to be the first on your block to get the new Soviet goodies... I got mine from Tista Minis in Hamilton, Ontario.

Sukhoi SU-25 Frogfoot Attack Aircraft for Team Yankee

Team Yankee escalation continues with some Soviet aviation - a pair of Sukhoi SU-25 Frogfoot ground-attack aircraft from Battlefront (TSBX20). Greg painted a couple of really nice Frogfoots (Frogfeet?) a few years ago, and since Battlefront's come out with an updated (and cheaper!) iteration of the models that I've just finished, a bit of a compare-and-contrast might be in order.

 

First of all, these are the latest and greatest SU-25s from Battlefront. While Greg's planes were resin, these are injection-molded plastic model kits. Like the Harriers I posted a short while ago, I believe that the sprues themselves were procured by Battlefront from a third-party manufacturer, Ace Corporation. However, while the plastic injection sprue includes drop tanks, rocket pods, and bombs, the Battlefront box also contains a sprue of resin KH-25 (NATO: "Karen") air-to-ground missiles. 

I elected to assemble the models as they would appear at the start of a sortie, with all 10 hardpoints filled with weapons. From inboard to outboard (fuselage to wingtip) they are: drop tank, KH-25, rocket pod, rocket pod, bomb. The canopy that's included is molded in the same grey plastic as the rest of the parts so I've painted it to match the rest of my aircraft. Speaking of paint, for the record I used Zandri Dust, Rhinox Hide, Castellan Green, and Vallejo German Uniform for the camouflage, washed Agrax Earthshade and re-highlighted Zandri Dust with some panel lines put in with Nuln Oil. The underside was painted with Mechanicus Standard Grey highlighted with The Fang (ugh) and Thunderhawk Blue. The canopy was done with Kantor Blue and Temple Guard Blue. Wingtips are Warpstone Glow. Rocket Pods are Leadbelcher washed with Nuln Oil.

The box comes with a full decal sheet as well, including these funky little flashes for the tailplane.

While the box instructions advise modelers to affix a provided clear socket to the underside of the fuselage, I elected to use magnets. The one advantage of the resin planes was that there is a recessed slot molded in to accommodate a magnetized stand, whereas the injection kits have no such feature.

 

All in all a pretty nice box set and should come in handy in games of Team Yankee. Can't argue with the price point either - $39 CAD compared to over $60 CAD for the old resin box set. The only downside of the injection kits is a slightly more fiddly way to mount them to the flying stands - but I'll take that tradeoff for $20 per box. Plus most of the weapons are injection molded and perfect - no worries about the crappy resin ordnance that plagued Greg in his build.

Onward to the West!

Team Yankee 15mm British Challenger Tanks and Harrier Jets

Fresh off the painting desk I've got a squadron of beastly British Challenger tanks from Battlefront's Team Yankee range.

I painted these in the same style as my Chieftains. Basecoated Catachan Green, highlighted extensively with Vallejo German Uniform. Camo painted with a mix of craft black and Mechanicus Standard Grey. The tank was washed with thinned Nuln Oil, then the green was re-done with German Uniform. Drybrushed all over with Ushabti Bone, then dusted up with the same. Tool handles painted Skrag Brown, machineguns and shovel blades done with Leadbelcher, fire extinguishers in Mephiston Red.

Each of the five Challengers in the box can be assembled as standard or with the upgraded ROMOR armour pack shown above. 

You also get enough alternate fuel drums to outfit the unit with those as well.

Three crew figures are included in the box as well.

As well as the alternate track skirts, you also get the ROMOR front hull armour add-on. No decals included with the box though. The Union flags were from my spares box.

Here's the standard armour configuration. Note track skirts and lack of reinforcement on the front hull.

Here's a closer look at the skirts.

Rear end sans fuel drums...

...and plain front end. I'm thinking that the Challys will be a useful addition to my British force. They're certainly worth a bucketload of points but they should be, with a front armour rating of 20 (standard) and 21 (ROMOR) and an anti-tank factor of 22 for the main gun! 

The Challengers are BIG... from left to right I've lined up a T-64, Leopard 2, Chieftain, and Challenger.

Crazy how much bigger this thing is than a Soviet T-64. Length of the Soviet tank hull is 6.54m vs. 8.33m for the Chally... looks about right I guess.

As if the Challengers weren't enough of a force multiplier, I also painted a pair of Harrier ground attack aircraft.

These are also from Battlefront... sort of. These are the new plastic kit Harriers that have replaced the previously offered resin kits. Good on Battlefront for offering plastic kits at a lower price than the old resin box, but that's not really the end of the story. The fact is that the new Battlefront Harriers are just repackaged sprues from "Ace Corporation". It's kind of funny actually... the sprues include landing gear and other parts that aren't even referred to in the Battlefront assembly instructions.

The box comes with a nice decal sheet though, including extra serials, tail flashes, and even roundels.

These two chaps should come in handy... being jump jets they can shoot at helicopters (!) and arrive on a 3+ each turn (!!)

Heh... another funny thing about the "Ace Corporation" sprues is that the canopy was obviously meant to be clear in the original (it was on a separate sprue from everything else) but in the Battlefront version it's cast in the same grey plastic.

I was thinking about getting some SU-25 Frogfoots for my Soviets and note that there are new "plastic kit" versions of those available from Battlefront now too... guess who makes a 1:144 Frogfoot kit? You got it, Ace Corporation.

Team Yankee 15mm Leopard 2s and BTR-60s + Vallejo Vehicle Paint

One of the things that the pandemic has been good for is ordering stuff over the Internet. What can be hit-and-miss though is the fulfillment of those orders. Back in April I thought to take advantage of some free shipping from Battlefront and ordered some GF9 terrain. I figured I'd add a couple Team Yankee tank sprues just for fun, so I threw in these two Leopard 2s. Well... suffice to say that my order finally arrived in July after having to cancel the first order and re-order the stuff... I guess I should also add that the complete order hasn't even yet arrived, since the two aircraft flight stands I added on were on backorder. I guess it doesn't matter much because there's no sign yet of the two 1/144 SU-25 Frogfoot model kits I ordered off eBay at the start of July... typical.

 

Anyway, the models finally arrived and have duly been built and painted in the same fashion as my other Bundeswehr Leo 2s.

The TY sprues don't come with decals, of course, but I had plenty of Iron Crosses and tactical numbers left over from prior projects. I just had to freehand a license plate for each of the vehicles.

The BTR-60 company came from a local brick and mortar store, so no worries at all about shipping or postage. Super-fast to paint these using the magic spraypaint (Krylon Camouflage Olive) - supposedly it's still in production but I haven't been able to find it anywhere. This lot of five vehicles emptied my last can :-(

 

Anyway, another thing I really like about the Battlefront Team Yankee vehicles is that they come with crew figures as well (are you listening, 1/72 aircraft makers???) I just love the cool character that a crew figure adds to the vehicle.

Cool looking crew eh!

Of course, one good use for these BTR-60s will be to transport the heavy weapons platoon of the Motor Rifle Regiment!

Just such cool little models. All injection-molded plastic and a snap to assemble, while retaining good detail.

I also have to give a shout-out to Vallejo for this paint set, which was a very generous gift from Conscript Perry (thanks Perry!)

I used the Panzer Colours "Dark Rubber" on the tires of the BTR-60s and it really worked a treat - I love the effect. It'll certyainly be my go-to paint for vehicle tires and likely also for Bundeswehr "teerschwartz" (tar black) as used in their three-colour camo pattern.

Anyway, that's it for now... until we can (finally) get gaming together again, stay healthy everyone!