Second World War Canadians

With many of the Conscripts involved in the Analogue Hobbies Painting Challenge, there have not been many posts on our blog page lately, so here is another one of my ‘Armies in Review’ posts. When I started doing Bolt Action my first army of choice was a Canadian force, and as I had been a member of the Queen’s Own Cameron Highlanders of Canada in my younger days, I wanted to paint up my infantry units marked for the 2^nd Canadian Division, and all the supporting units marked for those that actually supported the Camerons in Northwest Europe in 1944-45. At the moment I can currently field two 38 man infantry platoons, a company headquarters, a 6pdr anti-tank gun, 3 Vickers medium machine guns, 2 medium mortars, a carrier platoon of four Universal carriers, a few 25pdr field guns, a forward observation officer, a reconnaissance troop of scout and armoured cars, a troop of Sherman tanks, and a pair of Ram Kangaroo armoured personnel carriers.

The full force on parade.

Vickers machine gun teams, mortar teams, and 6pdr anti-tank gun

The machine gun teams are a mix of manufacturers being (from left to right) old school Bolt Action, Crusader Miniatures, and Westwind Miniatures. The team 'on the move' is also by Westwind. The 6pdr anti-tank gun and the mortar teams are by Battle Honors.

Carrier platoon to rapidly move the support weapons

The two carriers on the left are metal models by Battle Honors, with crews and extra stowage by Bolt Action. The two carriers on the right are resin casting by Bolt Action, as are the crews. The dimensions for the Battle Honors carriers are a bit off, primarily in that the part of the vehicle in front of the driver is too short. They end up being wider than the Bolt Action castings, but the same length.

Ram Kangaroo armoured personnel carriers

The Ram Kangaroos are conversions using the chassis from a 1/50 scale Solido Grant tank and a resin kit from Quarter Kit. I had purchased the Grants as something to use with my Soviets, but once I had enough T34/76 tanks, they got repurposed. The conversion kit went together very nicely, but I think they are no longer available.

Company headquarters, with supporting artillery in behind

All the figures are from the Westwind range, with the jeep being a repainted 1/50 scale Corgi diecast model with a crew from Bolt Action that was specifically marketed to go with the Corgi jeeps. At some point I have to do a conversion on the officer to replace his forage cap with a proper Highland Balmoral.

First platoon of the Queen's Own Cameron Highlanders of Canada

The platoon consists of a headquarters, a PIAT team, a light mortar team, and three 10 man sections, all wearing the blue divisional patch of the 2nd Canadian Division. The infantry sections are a mix of Westwind Miniatures and Crusader Miniatures. The Westwind figures are closer to true 25mm size, and I really love the animation in the sculpts. Each section consists of a section commander with a Sten gun, a Bren gun team and seven riflemen. The officer, NCO, and radio team of the platoon headquarters are Westwind castings, and the PIAT and Mortar teams are from Crusader.

Second platoon with the same composition as the first

A reconnaissance troop of two scout cars and two armoured cars

The reconnaissance regiment of the 2nd Canadian Division was the 8th Reconnaissance Regiment (14th Canadian Hussars). The Daimler 'Dingo' scout cars and the Daimler armoured cars are repainted Dinky Toy diecast models that I picked up cheaply from eBay. All had seen a lot of wear and tear, and much of the original paint had worn off, which was the main reason why I got them for the minimum bid. I didn't mind about the paint as I planned to repaint them anyway.

A troop of Sherman tanks 

The 2nd Canadiain Division regularly received armoured support from the 2nd Canadian Armoured Brigade. Since this gave me another opportunity to represent a home town unit on the gaming table, these Shermans are marked as 'C' Squadron Fort Garry Horse. They are all Solido 1/50 diecast models. Two were originally the version of the Sherman with the 105mm howitzer. On one of these I replaced the howitzer barrel with an appropriate 76mm barrel, while the other was converted to a Sherman 'Firefly' with a 17pdr anti-tank gun using a resin kit from Quarter Kit. All have extra track sections welded to their hulls to beef up their armour, as well as plenty of gear stowed on the rear deck. The extra track and stowage are resin casting.

25pdr field gun, transport, and a forward observation officer

One of the artillery units that was part of the 2nd Canadian Division was the 4th Field Regiment Royal Canadian Artillery. All the vehicles sport the proper tactical signs for that unit. The field gun, limbers, and crew are Battle Honors casting, while the Quad Field Artillery Tractors are again Dinky Toy diecast models acquired off of eBay and repainted. 

Me (on the right) in a Universal carrier

The above photo was taken in front of the Manitoba Legislative Building during the 100th Anniversary parade of the formation of the Queen's Own Cameron Highlanders of Canada in 2010. The vehicle bears the correct tactical signs for the Camerons. Thanks for reading. I wish everyone all the best in 2022, and good luck to all the Conscripts who are involved in the Analogue Hobbies Painting Challenge.

 

Second World War Soviets

 The Analogue Painting Challenge is about to kick off next week, and this year I am looking at expanding my Bolt Action Second World War collection starting with my Soviet horde. Here is the current array on parade. The infantry are primarily from Black Tree Design, with a few riflemen and the majority of the heavy weapons from Battle Honors. The platoon of T34/76 tanks consists of a 1/50 Corgi, two 1/50 Solido, and 1/48 Bandai. The Bandai T34 and the 'captured' Kubelwagen are recent additions, but most of the figures and tanks were painted over a decade ago and saw much action on the table top with the after school wargames club I organized.

 

A group photo of my Soviets: four rifle squads of nine men each, one SMG squad of eight men, two medium mortars, one heavy machine gun, one medium machine gun, one 76mm divisional gun, a headquarters, a captured Kubelwagen, and four T34-76 tanks, ready to repel the Fascist invaders.

A close up of one of the rifle squads, the 76mm divisional gun M1942 (ZiS-3), and two 82mm 82-BM-37 battalion mortars. The Battle Honors mortar teams came with figures to either be 'on the go' or 'deployed'.

Another two rifle squads each consisting of a section leader with a submachine gun, six riflemen, and a DP-28 light machine gun. Behind them are a DShK 1938 heavy machine gun team, and a PM M1910 medium machine gun team. The machine teams again came with enough figures to be either 'on the go' or 'deployed'.

A fourth rifle squad in front, a squad armed with PPSh-41 submachine guns behind them, and a platoon of T34-76s at the back.

A stern commander with his captured Kubelwagen staff car, and a small escort of riflemen.

A group of 'character figures' from Black Tree Design. You can just smell the bacon frying. 

A close up of the two medium mortar teams from Battle Honors.

A close up of the two machine gun teams, heavy machine gun on the left, medium machine gun on the right.

A close up of two 1/50 diecast T34s from Solido (closest to the camera) and Corgi. The Corgi is a later model with two hatches in the turret.

The last two T34s, a plastic 1/48 Bandai kit, and a 1/50 Solido diecast model. Both are the early version with the single turret hatch.

 

So what's on the workbench for the next few months? Soviet infantry in summer uniforms, Soviet infantry in winter uniforms, Siberian veterans, a variety of support weapons, more tanks, and an armoured car or two. Below are just a few of the projects I hope to have rolling off the assembly line soon.

Soviet Infantry (Winter) and Siberian Veterans from Warlord Games, and another T34/76, this time from Tamiya. I plan to do this one in Winter camouflage.

 

Russian Infantry in Summer Uniforms, Russian Infantry Heavy Weapons, and a pair of Russian 45mm Anti-Tank Guns, all from Plastic Soldier Company, and a KV-1 from Hobby Boss.

Thanks for reading. I hope you have enjoyed this little trip down memory lane. As projects are completed I will post them on the blog to keep you up to date on my painting challenge progress.

Tamiya 1/48 M8 Greyhound and Winter GIs

Well, it's Thanksgiving weekend here in Canada and last year at this time, we had a foot of snow on the ground... thankfully it's pretty nice here still this year (I cleaned the leaves out of my house gutters today) but we know that winter is just a matter of time. 

When I posted about the Solido M20 Command Car and winter Sherman I threatened to post again with the entire army, and it's only taken seven months :-)  Most of the infantry are from Artizan Designs.

These are supplemented by a command squad from Bolt Action, that I've posted about before.

I also augmented the Artizan troops with a veteran Bolt Action squad. All of the models in the army are metal.

Lots of .50 cal. "Ma Deuces" in the force... along with one tripod-mounted HMG, there's also one on the Sherman, one on the M20 armoured car, and one on the Greyhound.  

A couple of Artizan .30 cal. MMG crews in the force as well.

The latest addition prompting this post is the completion of this Tamiya M8 Greyhound.

Turned out pretty good. I also added resin wheels and tirechains from Black Dog (blackdog.cz), a manufacturer based in the Czech Republic. The fit was absolutely flawless and a really easy conversion to make.  

I left off securing the front and rear fenders to the model until after I'd painted the wheels. The paintwork was done the same as on the M20 and Sherman - Catachan Green basecoat, Rakarth Flesh stipple followed by White Scar. Done! 

The crewman required a bit more thought. The crew model was supplied in the Tamiya kit but the pose was kinda boring - just holding a pair of binoculars in front of his chest. So I pinched a pointing arm from a handy Bolt Action plastic US Infantry set and added that.

Now, how to secure him in the turret? Magnets to the rescue of course... I superglued a 5mm rare earth magnet to the crewman's feet...

...and stuck a corresponding magnet on the top of the seat in the bottom of the turret (see next pic)

You can just see the magnet on top of the seat in this pic. It actually worked really well; the crewman stands up nice and straight and is quite secure.

A couple other models added to the army... first a .50 calibre machinegun team. This one is from Warlord's Bolt Action range and is actually a weird little set. You get these very useful crewmen for the .50, but the pack also contains two other oddballs, one of which is warming himself over a fire (!)

I haven't painted the other two models from the pack yet.

I also got a couple of .30 cal. MMG teams from Artizan. They should come in handy in a game, if these guys ever get to see the tabletop.

Hope you enjoy the post and stay healthy, friends.

28mm Great War Germans from Foundry

As I wrote in my recent post on my Foundry Great War British project, I've developed an obsession with the early part of the First World War to match my enthusiasm for the late war. So having finished the early-war British, it was straight into the early-war Germans to fight them.

What are early-war Germans without UHLANS??? Nothing, that's what! So I had to make sure my army had a contingent of these amazing lancers, led by a purposeful looking chap wielding a C96 Mauser pistol.

Sorry about the focus... but these models are too cool not to have a close-up. I love the musician particularly. The lances were included with the models and I painted the pennons to suit a Prussian unit. I was going to do Bavarians with their white-over-blue pennons for a pop of colour, but once I did the white it had to be Prussians.
 

The castings were fantastic, and so detailed that I had to buck my usual style and paint eyes on them.

Can just see these guys riding down some BEF infantry/getting slaughtered by machinegun fire...
 

Quite a lot of models here. The contingent started off with twenty-odd models from the collection of our late friend Glenn Shott, which I augmented with about forty-five more infantry figures. The totality represents a three-company battalion under the Great War rules.

The Germans took quite a while longer to finish than the British did, just because of all the detail on the models. While the Brits' P08 webbing was all one colour and a snap to paint, the Germans' equipment was multi-coloured and took many steps. Even so, I did paint all 45 or so infantry in one batch, one colour at a time!

These are some of Glenn's models, I just touched them up a bit and based them.

I really rate the Foundry models highly. It's just too bad that no modern figure ranges mix well with them. Modern figures are all too big and chunky.

Three MG08 machineguns, one painted by Glenn.

Here are some I painted. You can really get an idea of the detail in this shot. I painted the troddeln (bayonet knots) the proper colours for 1st, 2nd, and 3rd companies.

Infantry all together. These should be an adequate force for some early-war fighting where the Germans were on the attack. Of course, there needs to be lots of Germans to be targets for the famous "mad minute"... looking forward to getting these chaps out for a game soon.