They worked with the Electric Time Company of Medfield, Massachusetts, the original maker of the clock, to source missing parts
Showing posts with label restoration. Show all posts
Showing posts with label restoration. Show all posts
Saturday, August 16, 2025
an electric oak clock from the 1950s that was a fixture of the Pennsylvania Railroad’s Union Station in Pittsburgh, was retired in the 70s, and finally restored in 2022
They worked with the Electric Time Company of Medfield, Massachusetts, the original maker of the clock, to source missing parts
Sunday, June 15, 2025
Sunday, June 08, 2025
Volkswagen of America plans to restore the white-over-blue Type 2 Bus that appeared in the famous photo of the lone surviving vehicle in the Palisades fire in the Malibu area
among the countless images of charred destruction, one stood out: a white-over-blue 1977 Volkswagen Type 2 Microbus, surrounded by burnt and broken buildings but seemingly untouched.
Tuesday, June 03, 2025
Ken has spent the last seven years restoring the only remaining 1924 Bay State sedan known to exist
Saturday, April 19, 2025
getting a well preserved Massey Ferguson back in running order
this is such a pleasant video to watch, and I LOVE that thermostat
Saturday, March 08, 2025
Sunday, January 12, 2025
Sunday, September 29, 2024
Sunday, August 18, 2024
Saturday, May 18, 2024
Saturday, April 27, 2024
using a big hydraulic press, and a pie of railroad rail... to straighten a bent frame. Skip the first two minutes of the video, they are just a quick preview of the whole thing. Watch at 1.5 speed or faster
this video shows the hydraulic press used to straighten out the frame, unlike the previous videos I've posted where it was all hammer work
Wednesday, April 17, 2024
the Movie Memphis Belle has completed two years of restoration work and the engines were fired off for some test runs... (thank you George!)
During this initial ground run, three of the aircraft’s four engines (#1, #2, and #4) were run at different power settings but the aircraft’s right-inboard engine (#3) required more work before it could be test run.
In the leadup to the engine run other work was being done to get the Belle airworthy again after its time on loan to the National Warplane Museum at Geneseo, NY from replacing a section of the wing spars to adjusting tail control cables and restoring the floorboards in the waist section.
Friday, July 07, 2023
It's been a long time since I've watched a restoration video... these are best at 2 times regular play back speed, you can select that in the video settings
I found another I wanted to show you, but the people that made it won't let it be seen unless you watch it on You Tube: https://youtu.be/h0ww4rRjivA
it's satisfying to see these, but let them run at 2x speed so it's not so time consuming, bead blasting is dull to watch
This last video channel, The Fabrik, has a LOT of these tin toys getting restored,
Saturday, March 25, 2023
Thursday, December 01, 2022
restoration of a Sally Saw... no, I've never heard of it before, but it's a nice long restoration video of a machine and the Briggs and Stratton type small engine.
Cummings Machine Works was a Boston, Massachusetts based business. It was founded by Henry Havelock Cummings in 1881, when Cummings was 23 years old.
The company was among the firms which contributed to the building of the Boston Opera House, completed in 1909, supplying steelworks used in the construction of the stage.
Cummings Machine Works has been credited with the development of the sally saw. A patent filed in 1945, and assigned to the company, describes a saw with a circular blade. The blade could be rotated between horizontal and vertical, thus allowing a tree to be felled, limbed, and bucked with one saw. Other inventions included a hydraulic hospital bed, automatic doughnut machine, teardrop vehicle and Hookups.
Last owners were Robert M. Mustard, Sr., Pres., and Lewis W. Mustard, Treas. Last known address was 10 Melcher Street in Boston, MA. Went out of business in 1958.
Cummings Machine Works has been credited with the development of the sally saw. A patent filed in 1945, and assigned to the company, describes a saw with a circular blade. The blade could be rotated between horizontal and vertical, thus allowing a tree to be felled, limbed, and bucked with one saw. Other inventions included a hydraulic hospital bed, automatic doughnut machine, teardrop vehicle and Hookups.
Last owners were Robert M. Mustard, Sr., Pres., and Lewis W. Mustard, Treas. Last known address was 10 Melcher Street in Boston, MA. Went out of business in 1958.
Sunday, October 02, 2022
1956 Little Gem camper trailer is getting rebuilt, and will be sold at Barrett Jackson next January
the video does use time lapse, but still, change your video speed setting to 2x speed
skip the first minute
https://www.facebook.com/groups/3446039128768332
https://www.facebook.com/groups/3446039128768332/user/100026685125977/
https://mrvrestoration.com/
https://www.youtube.com/c/MrVintageRestoration/videos
Sunday, September 18, 2022
Sunday, April 10, 2022
Sunday, March 20, 2022
go kart restoration, I recommend watching at 2x speed
I'm curious if that's JUST a hot air gun? THAT"S what makes tires look good again?
Monday, March 07, 2022
Subscribe to:
Comments (Atom)