A Dandedaisy card

 

Hi There! I thought I would show you how I made this card today.

I began by blending some Mustard Seed Distress Ink onto a 14cm square piece of smooth white card.  

Next I stamped the script background stamp over the whole panel also with Mustard Seed Distress Ink. 

I inked up a section of the Bakewell Big One Inkable using Uncharted Mariner Distress Oxide ink. I then spritzed it with water and laid it onto the background. I dried it using a heat tool then repeated this step to add ink to the lower section of the card panel. 

On a separate piece of card I stamped the largest Dandedaisy and painted it using the same distress and distress oxide inks and a little water. Once dry I cut it out.

After sponging more Charted Mariner ink around the edge, I added the panel to the front of a 15cm square card. I stamped the sentiment in the yellow section of the card using Memento clair ink. 

Finally I added the dandedaisy on 3d foam pads  onto the card. 

I used:

Script Background stamp

Bakewell Big one Inkable

Doodle Art Dandedaisy Stamp set

Doodle Art Dancing Daisy stamp set

Mustard Seed Distress ink

Uncharted Mariner Distress Oxide ink

Versafine Clair Nocturne Ink

15cm square white base card

14cm square of white smooth card

I will be live this evening at 8pm over on the bee Craft Facebook page. I hope you can join me! 

Don't forget, if you find yourself on the Bee Crafty Website from my blog post, you can get yourself an extra 10% off by using my discount code! Just pop BEESALLY10 in at the checkout x

Go For It!

 

Hi there! Thought I would show you how I made this card for my blog post today. 

I began by covering a tag inkable in distress oxide ink, giving it a spritz of water then laying it ink side down on a piece of mixed media or watercolour card. I did this three times with the three different colours then dried with a heat tool. 

Once this was dry I added some more colour using the same inks and blending brushes. 

Next I took the innie from the 4" star easy frame and blended black soot distress oxide over it. I did this 3 times too. I also sponged a little black ink around the edges

using the Background Script stamp I added some patches of script randomly around the card using the black soot Distress Oxide ink

Next I added a few patches of Distress Spritz over the panel.

I cut the 3 words from the transparency sheet and added them to the stars using matte medium. 

Finally I attached the whole panel to a DL sized card. I did contemplate adding more to it, like white pen or butterflies but decided it was fine as it was. 

I used:

Mixed media card 9.5 x 20.5cm

DL card

Tag inkables - I used set 2 - Check out the offer on these at the moment

4" star easy frame 

Background Script stamp

Distress oxide inks - I used Black Soot, Abandoned Coral, Mustard Seed and Lucky Clover

Mister bottle

Distress Spritz - I used Worn Lipstick

Transparency Prints - I used Spontaneous words black on clear

Matte Medium

There is just over a week left to get your entries into the Vivid challenge over on the Bee Crafty Stamps facebook group. I hope you can join in and also take advantage of the tag inkables offer! Also, If you find your way to the Bee Crafty Website through me, you can claim yourself 10% off by entering  this code at the Checkout:  BEESALLY10

Thanks for looking!