1/144 WWII German Panzerjäger/StuG Crew - CGD

1/144 WWII German Panzerjäger/StuG Crew(s) - CGD
This set contains 8 "Thigh Height" and 3 "Full Height" German Panzerjäger/StuG Commanders and crews in various poses, fully painted in Heer Feldgrau uniforms.

These "Thigh Height" figures are for fitting into the commander's cupola and other hatches.

The three "Full Height" figures are specifically for manning open topped tank hunters like Nashorns or Marders.

The set also come with UNPAINTED circular and rectangular hatches for conversion.

Figures thigh measures roughly 2.5mm in diameter. Using a 3mm diameter drill bit, customer can bore through existing tank hatches and replace it with open hatches.

**Figures are PAINTED. Hatches are NOT, Vehicles NOT included.**

Modelled according to average Caucasian of height 5' 8" to 5' 10" (1.73m to 1.78m). Figure measures approximately 12mm when standing upright (for full figures). Highly detailed, highly realistic and in real human proportion. NOT big headed cartoon-ish wargame figures!

Digitally mastered, the soldiers are fabricated with state of the art "3D Printing" technology in ACRYLIC RESIN.

The resin material is like regular resin and should be handled as such.

CGD web shop:
http://www.combatgroupdynamix.com/eShop/eShopNew.html

CGD eBay:
http://stores.ebay.com/Combat-Group-Dynamix/Hot-New/

1/144 WWII German Tank Crew in Combat Set - CGD

1/144  WWII German Tank Crew in Combat Set - CGD

This set contains 10 "Thigh Height" German Tank Commanders in various poses, fully painted in their well known black uniforms.

These figures are for fitting into the commander's cupola and other hatches.

The set also come with UNPAINTED circular and rectangular hatches for conversion.

Figures thigh measures roughly 2.5mm in diameter. Using a 3mm diameter drill bit, customer can bore through existing tank hatches and replace it with open hatches.

**Figures are PAINTED. Hatches are NOT, Vehicles NOT included.**

Modelled according to average Caucasian of height 5' 8" to 5' 10" (1.73m to 1.78m). Figure measures approximately 12mm when standing upright (for full figures). Highly detailed, highly realistic and in real human proportion. NOT big headed cartoon-ish wargame figures!

Digitally mastered, the soldiers are fabricated with state of the art "3D Printing" technology in ACRYLIC RESIN.

The resin material is like regular resin and should be handled as such.

CGD web shop:
http://www.combatgroupdynamix.com/eShop/eShopNew.html

CGD eBay:
http://stores.ebay.com/Combat-Group-Dynamix/Hot-New/

1/144 SdKfz 164 Nashorn - Hornisse

Czes881 in Poland has produced a great looking micro diorama with the 1/144 Nashorn from Dragons Panzer Corps Series.

I think you will agree the end result is a very pleasing, the kit has been nicely produced and works well with the diorama pieces. The kit used some mix of photo etched parts from the original it, and some additional brass/copper wire. The diorama is also well presented and includes what looks like an effective and made tree? The weathering has been applied well, especially around the tracks. The crewman sat on the barrel is also a nice touch.

The build gallery shows how a simple cheap kit can be taken through to a good show standard display.

I'd recommend looking at the links below for more information.
Picture Gallery: http://modelwork.pl/viewtopic.php?t=25408

Build Gallery: https://picasaweb.google.com/czes881/1144SdKfz164NashornHornisse?feat=directlink#