(Remember: click on the pictures
for a bigger version)
Unit very nearly finished on the
workbench.
There he is, the standard bearer
himself.
I use standard quarter inch
ruled graph paper from a pad. I use the pad stuff (ass opposed to stuff from a
graph notebook or loose pages) because on the pads the lines are only printed
on one side! The lines are dark enough to bee seen through to the other side –
to easily use as guidelines – but not dark enough that they will be seen
through paint when the painting is done on the back (non-lined) side.
First I measure or just set the
figure down on the page to see approximately how big of a flag I’m going to be
able to make. Looks like I can do an 1 ¼ inch flage here.
Outline on reverse
Leave a quarter inch gap between
the two flag field faces for wrapping around the pole – probably more than is
necessary for most things you’d use as a pole – but better to have too much
than not enough.
Here is where I would mark out
geometric shapes – but this is a very simple flag I’m working on today – one
colour with a devise in the top corner or maybe center. I hadn’t really decided
as I was starting. Perhaps it would have been better to do this when I was
making flags for some Seven years War or Napoleonic troops with more
interesting/elaborate standards… but I’m not painting those today. Perhaps I’ll
do another some day when I get back to those periods…?
Using the lines I can see
through as a guideline I paint some brown rectangles down the center – this it
to make it look like there are bands of fabric wrapped around the pole
Dark red as background to the
main field. The red I use is Decoart Americana Napa Red – it’s fairly
translucent – which is okay when painting over a black primed figure, but
painting on white paper it’s going to need two coats.
Second coat. probably could have done with a third... but I am lazy...
Yes I paint way outside the lines on the outer edges that will be cut – it doesn’t matter – it’s going to be cut off and better to overshoot those lines than be a shade short and have white bits showing on the coloured field when you’ve cut it out!
Yes I paint way outside the lines on the outer edges that will be cut – it doesn’t matter – it’s going to be cut off and better to overshoot those lines than be a shade short and have white bits showing on the coloured field when you’ve cut it out!
Next I did the outline of the
device in black. I kind of just
eyeball it and paint it freehand – other than RIGHT NOW, no one is ever going
to see both sides of the flag at once and so won’t be able to tell if it
doesn’t line up just perfectly. Also if it does look a little wonky it doesn’t
really matter as when I bend it to make it look like it’s flapping in the wind
- everything will get visually distorted anyway. I’m going for a “general
effect” – so that when someone looks at it on the tabletop they will be able to
recognize that it is a flag and be able to tell which side it is on and maybe
be able to quickly make out a few details to tell which unit it is (especially
if in an army with uniforms that are otherwise not easy to tell apart)
Then on top of that the base
colour for the device.
Then highlight colours for field
and device. I have just painted sections one colour - but I prefer to do it with a deeper background colour and a highlight colour as I find it gives the finished flag a bit more movement and dynamism.
This is, more or less, the same process I use for painting shields - only on a slightly grander scale.
This is, more or less, the same process I use for painting shields - only on a slightly grander scale.
Once it’s all dry I cut it out –
usually using the lines on the other side to determine where to cut (as I
coloured outside the lines on the other side!). Usually I'm holding it up to let some light shine through so I can see where I painted on the other side.
This was exceptionally hard to
take a picture of as normally I am using two hands to do this – one to hold the
paper, the other holding the scissors… I ended up having to prop it on the edge
of the table and take the picture holding the camera in my left hand – and
trying to hold is super steady as the lighting in the basement was not exactly
ideal and the shutter speed was about 1/25 or 1/30!? I had a similar problem a
few of the next few shots as well – normally I’d be holding the miniature with
one hand, painting (or whatever) with the other… but hopefully you get the idea
of what is going on here.
All cut out and ready to be
mounted on the figure!
Slather one side with white glue
or acrylic gel. I prefer the gel, but I've used both.
Carefully wrap around making
sure all corners match up - and wiping off any excess glue or gel that squishes out the sides (this is where a matte acrylic gel makes things easier - you can just use a brush and spread it over the flag). I also kind of pinch the flag together at the pole
so it wraps tightly around at the pole.
Once that is done, shape the
flag to look like it’s flapping in the wind!
Once it’s dry I have a good look
at it and if there’s areas where the two sides of the paper didn’t match up
quite right I carefully trim it with some smallish scissors – this one happened
to turn out pretty good so I didn’t have to try and take any pictures of that
maneuver which surely would have exploded my brain!?
NO matter how tightly you press
the two sides together there is always going to be a bit of white showing at
the edges…
…so I just touch up the edges
with whichever field colour is appropriate – luckily here the entire banner is
one colour so there was no delicate fiddling involved. I don’t leave a huge
bead of paint on the flag – like the one you can see in the picture above –
that was subsequently spread smooth on the flag. I also, at this point, touch
up any of the highlight colours to make them brighter in parts that are on th outer
sides of the folds – if necessary.
Once it’s good an thoroughly dry
I give it a coat of the same brush on varnish I paint on the figures.
And we have a finished standard
bearer.
Well I hope this has inspiring for
at least some of you out there. Do please let me know if you find this sort of
post useful – they’re fun to do – but time consuming (and time isn’t something
I often find myself having a surplus of!). If you have any questions - fire away in the comment section below!
I will try to do this again sometime when I have a more complex or elaborate flag to do.
I will try to do this again sometime when I have a more complex or elaborate flag to do.
Coming soon on Tim’s Miniature Wargaming Blog:
I’ll do a quick post of the finished unit shortly….