From GregB - Challenge XVI Wrap-Up

The pile

Well, that's a wrap for AHPC XVI! Like so many have said, the time does fly by. Did I manage to make my points target? No! Did I manage to focus on a few core projects? Sort of! But I did make some great progress on some fun projects, and that is, as they say, the most important part! Let's take a quick trip through some highlights of this latest Challenge...

Assorted Bits

An Onmioji ready to confront evil Oni...

Mercenary artillery in 10mm.

Imperialist pike block for "Epic" Pike & Shotte.

100 Years War - Joan of Arc leads the way...

30K Stuff

Some Sons of Horus - XVI Legion for the XVIth Challenge!

Axehole 2.0 and the gang!

Raven Guard Assault Optae.

Contemptor Osiron Dreadnought.

Smaller 30k Stuff

XV Legion Detachment.

XVI Legion Detachment.

A few more XV Legion guys...

The Dogs of War

This is year two for my Dogs of War project, and I was really happy to get these units over the line - the Dogs of War collection is now nearly complete...

Borgio the Besieger.

Mydas the Mean, Sheikh Yadosh and bodyguards to protect the pay chest.

Ricco's Republican Guard.

Leopold's Leopard Company.

And that's that! A big thank-you to everyone who followed along, and also to all of the great members of the Thursday team. All who took the time to leave supportive comments were greatly appreciated, and helped to sustain the painting momentum. Sylvain was also a wonderful minion, and I always looked forward to his summaries at the bottom of each post. Last but no least, many thanks to Curt and Sarah! Hope to see everyone again next year!

From GregB - Finishing AHPC XVI With The XVIth (20 points)

Siege Breaker Consul and assault marines from the Sons of Horus. Resin figures from GW/Forge World.

The time flies by, and like so many Challengers I'm just under the wire with this one. I wanted to conclude my run in the XVIth edition of the Analogue Hobbies Painting Challenge with something fitting, and I figured some Space Marines from the XVIth Legion Astartes would do the trick. Here we have a Siege Breaker Consul and three assault marines in the fine colours of The Warmaster's own, the Sons of Horus.

Siege Breaker Consul

"So...anyone have anything that needs breaking?"

What does a "Siege Breaker Consul" do? Sounds like a bit of a made-up job...one has the impression he conducts sieges...but job title implies he "breaks" sieges so maybe his job is instead to bust up sieges attempted by opponents...who knows? But he clearly is out to break things. I mean, look at that hammer. Like they say, when you walk around with a hammer, everything looks like a nail. Woe betide the foes of The Warmaster when this chap shows up. 

In addition to the giant hammer, he obviously has a really amazing wireless plan, with unlimited 5G data, great roaming options and no hidden fees...

Love that 5G intergalactic roaming in the year 30k...

I like the little portable data terminal attached to his power armour, with a little projected 3d map, presumably of some target he is about to annihilate via an orbital strike or some other manner of Age of Darkness doom. 

Bright yellow "safety grenades" on the rear of the power pack. This chap has all sorts of grenades.

This is a resin figure from GW's "Age of Darkness" range. I'm not the biggest fan of GW's resin, but thankfully things were not too bendy. Besides, he is wearing the Mark VI "beakie" power armour and, well, I'm a sucker any models wearing that kit! 

Assault Marines

Ready to jump into the action...

These are old, old resin figures - the marines are wearing Mark IV armour. They are resin models from Forge World, circa 2012. I have re-painted them to ensure their green armour matches that of the other Sons of Horus in my collection, part of my ongoing long-term program to placate the OCD hobby monkey in brain. 

Will re-painted figures suffer the same fate as newly-painted figures?

The officer has a comb on his helmet (hilarious) and an extra-large chainsword, for those jobs that need serious chopping. The other marines are kitted out in the more traditional bolt-pistol-and-chainsword combo common to the Astartes assault troops. With these three finished, I have completed the necessary repainting to put my old squad of 15 of these fellows back into the battle line - with a tone of green armour that will match that of their colleagues and thereby sooth the rampaging OCD hobby monkey in my head.

Love the double-handed chainsword. A silly weapon made even sillier. Brilliant.

So for points, we have a total of four 28mm foot figures in this submission- that should be good for 20 points. And that's that for me with AHPC XVI!

Big Thank You

I want to thank Curt and Sarah for hosting another edition of the Painting Challenge, and to thank all of the Challengers for sharing their work and their comments. I also want to thank everyone on the Thursday crew for their patience and their tremendous brushwork. Take care everyone...see you all again in December!

________________________________

A wonderful parting shot from you, dude, and made even better as they are from your favourite Legion of the Horus Heresy. The 'vintage' (is 2012 old enough for vintage - I think so) assault marines look excellent and suitably ferocious with their chainswords and heretical thoughts. But the star of the show is obviously the impressive 'Siege Breaker Consul'. Like you Greg, I'm somewhat mystified by his title, but like many thinks in the GrimDark Future I think its best not to ask silly questions. With his iPlate Pro and 'Task Hammer' he's obviously an important guy with important things to... blow up. Best to leave him to it. Fabulous figure though! I love the tablet detail that you've done and all his attendant kit is wonderfully painted. Fantastic stuff, my friend and four more fine additions to your heresy, er, liberator force. 

Finally, thank you for being our Thursday minion and for providing such great comments to so many of the entries this year. It really makes a difference. 

Same time next year? I think so!

- Curt 

From GregB: Onward to Orleans! (20 points)

"Forward! God has shown me the way..."

As the Challenge clock ticks down I continue to make best efforts at clearing the painting desk at home. While I do not quite match the fervour of the "squirrel duel" participants here in the Challenge, I usually have multiple projects in multiple scales "on the go" at the same time, some of which lurk around the painting table for long periods. The Hundred Years War in 28mm is one such project, and as the conclusion of this edition of the AHPC looms, I thought it would be nice to get a few figures from this period finished.

Jean de Dunois directs the defence of Orleans - while his half-brother sits in England as a captive.

This was inspired mostly by the "Resistance" theme round, for which I painted the wonderful 28mm sculpt of "Joan of Arc" from the Perry Miniatures range. That particular pack includes two other figures: Jean de Dunois, the "Bastard of Orleans", and Étienne de Vignolles, a.k.a. "La Hire". With Joan painted, I thought it would only make sense to paint the two companion figures. Both of The Bastard and La Hire were prominent in French efforts to defend the city of Orleans, which began in late 1428 and was miraculously lifted in 1429 via a series of battles where Joan of Arc played an inspiring role. It was the famous turning point of a famous conflict. 

Sculpted heraldry right on the figure - very, very helpful when it comes to painting!!

I understand that Jean du Dunois was certainly a tough character, but his nickname arose from his semi-legitimate origins as much as from his disposition. When the time came to defend Orleans, the other male family leaders were either dead or captives of the English following the disastrous defeat at Agincourt. He was the only left, so he had to step up. Dunois led the defence of the city and, following the lifting of the siege, helped see the Dauphin crowned in Reims and take the fight to the English and their Burgundian allies. 

Soldiers of the King of England, you will face the wrath of God!

La Hire (pronounced "La EEeer") was another hard man - in fact, I believe this nickname has some kind of alignment with "the ire" or "the wrath" of God. Sounds like a guy you would not want to confront lightly, especially if he has armour and a sword. La Hire was a prominent figure in Joan of Arc's miraculous run through the historic turning point of the Hundred Years War at Orleans and on to Reims - although he could not save her from the matyrdom which awaited her...

"For the Dauphin!"

The heraldry on these two characters is sculpted right on to the figure - that is something that I really like! I hoped I found the right set of colours for the heraldry for each one but...oh well...he at least they looks like they are in charge. 

Finally, I need to add more mounted knights and men-at-arms for my French, so I thought I would do a couple to accompany these commanders. I...really don't have a lot of confidence that I am taking the right approach to painting these kinds of guys. I'm trying to figure out the right way to represent the full-on knights versus guys who are "only" men-at-arms. On the plus side the multi-part plastic kits for the period from Perry Miniatures give you a LOT of options to work with. So I have tried to represent Knights with more complete armour, lowered visors, chain-mail on the horses etc. while the men-at-arms have less armour, or maybe only a bascinet...

A mounted man-at-arms from the Bastard's retinue.

I thought one of the men-at-arms should come from the Bastard's own retinue, so I tried to hand-paint the coat of arms for Orleans on his small shield.

The Maid of Orleans leads the French to glory! God wills it!

I wanted to crowd all of the Knights I have completed to date into a big group shot, so I have done that here! There are all sorts of mounted figures in the group photo, but only six mounted 28mm figures count for this post. I reckon I will need at least another 12 or so mounted knights/men-at-arms for my French collection (or, at least, the initial part), something I intend to work away at over the spring and into the summer - and I expect this project will surely be in my project pile by the time of AHPC XVII...

 

==========================

Sylvain: I see 2x 28mm mounted figures in this post, so I adjusted the points to "20". Please correct me if I'm wrong.

 

You are a gentleman and a scholar. Your post deserves to be called "educational" for its historical information. And the models are just sumptuous with their ornate armour. Bravissimo!

 

 

 

From GregB: Saturnine Terminator Squad (45 points)

It's Saturnine time!

We have reached the final week of another Analogue Hobbies Painting Challenge. Time to cram a few more submissions over the line in a desperate rush for points! Probably the best place to start are some things I had told myself that I would "definitely finish some time during the Painting Challenge", but have been procrastinating about for one reason or another. It is in this spirit that I present to you this Saturnine Terminator squad. These are "28mm" multi-part plastic figures from GW's "Age of Darkness" setting (a.k.a. the Horus Heresy) painted in the fine colours of the XV Legion Astartes, the Thousand Sons. Because space wizards want to wreck sh*t too. 

"Let's blast something! Or smash it! I'm good either way!"

"Saturnine" kit is the "new big thing" for the 3.0 edition of GW's Age of Darkness rules. There is surely some lore for this armour variant and...well, I would share but for the fact that I haven't bothered to give it even a cursory scan, as it amounts to a farcically clumsy ret-con into the Horus Heresy story and I sort of don't care about the story. Suffice to say these are really, really big suits of powered armour, with impressive battlefield capabilities, big guns etc. etc. 

Note the blaster mounted on the power fist - so he can either punch someone OR shoot them even more!

These specific models are equipped with...I think that is some manner of "disintegrator" weapon on the one arm, while the oversized fist also sports a shorter-ranged blaster or flame-weapon of some kind. I would get the names, but that would involve encountering the Age of Darkness 3.0 rulebooks and...I can't be bothered. Rest assured the kit is all suitably super-duper-kill-things oriented.

I did not pose the legs very well on this one...looks like he is trying to step quietly or something, which is pretty silly, but whatever, he'll still fight on the table!

These models have a lot of components, and the instructions are not exactly clear in terms of the best ways to assemble them. To the credit of the designers, they want to offers hobbyists different options in terms of posing the feet and hands/weapons...but this goodwill is undone by the sheer "chonk factor" of these brutes. They crowd their bases, so there is not all that much to do with the legs, and the huge oversized, turtle-style upper shoulder sections crowd out any effort to meaningfully pose the arms. 

Close up on the ranged weapon. Cool looking gun - I'm sure it is super safe to use and poses no risks at all to its own side...

I recall GW came out very quickly with a "hey, here are a few tips from the studio" type article for assembling these models not very long after they hit the shelves. Naturally enough the studio guys offered an approach quite different from the one in the instructions....sigh...

Sub-assemblies - the "collars".

More sub-assemblies - the helmets. Took the opportunity to stick transfers on them too, before sticking them in the model.

A mid-point WIP photo. 

In terms of assembly and painting, these models are best thought of as small dreadnoughts, and there are so many overlapping sections that I recommend painting them in sub-assemblies. The "turtle shell" tops do not assemble easily, and you should probably put them on last AFTER you have painted the rest of the model, because they are so dominant that they make significant parts of the figure unreachable with a paintbrush - and yet they do not cover the ENTIRE top area, and so will leave any unreachable sections visible if they are not painted...that is the sort of combo that makes the OCD hobby monkey in my brain MENTAL.  

Close up on one of the helmets.

The head is a real challenge too - once more, a sort of "collar" goes over the head, but small parts of the internal area around the helmet will be visible even though the fit it very tight...so once more, sub-assemblies were called for. 

Maybe this is why these things sat around my painting table for so long. I had primed all of the bits prior to the start of AHPC XVI, convinced I would get them finished as part of my Challenge plan. But as my enthusiasm for Age of Darkness 3.0 really faded, I found other fun stuff to paint, telling myself that I would "do those Saturnine guys at the end." Well, here we are, so better get them done, right??? 

"Let's hit the town fellas!"

Good to have them over the line. If I ever do get them into a game, I'm sure they will cause a fair bit of havoc - even given the doom all newly-painted models seem to face, the rules for these Saturnine guys are pretty silly so they'll have a fun old time. I think you can even give them a psychic power? Which seems...bonkers...but then, to be sure, I would need to crack open the rule book and...I'll just figure it out some other time. 

For points, I am hoping to count Axehole 2.0 as a precedent, and mark them at 15 points each given their large size, which would bring this to 45 points. 

________________________________________________

Fabulous work on these oversized walking scarabs, er, Dreadnoughts, er, Terminators, Greg! You did a terrific job on picking out the models' details while maintaining the restraint to give them a cohesive look (i.e If you know the 30K lore, you know these are from the Thousand Sons). I cringe at your description of various sub assemblies and build strategies, as that seems like, well, too much work! Nonetheless, your efforts paid off handsomely, and they look ready to curb-stomp all library late-returners and Space Wolves (after they've diddled with their minds and shot them, of course).

I will follow the 'Axehold Precedent' and award 45 points for the herd. 

Well done in getting these over the finish line, dude!

- Curt

From GregB: Leopold's Leopard Company (122 points)

"Leopold's Leopard Company" is ready to meet an opponent's charge...

I am super pleased to present another Regiment of Renown from GW's old "Dogs of War" collection - here is Leopold's Leopard Company, and they are ready to stand in your battle line - so long as the deposit is paid up front and on time. These battle-hardened pikemen are long-OOP metal castings from Games Workshop and the glorious before-times.

One of the front-rankers, pike set, ready for the clash.

A back ranker.

Leopold and his men started out as guards of the Temple of Lucan and Luccina in the Tilean city of Luccini. It was fancy, well-paid duty. The unit is resplendent in fine armour adorned with the symbols of the temple - in particular the visage of the leopard who had guarded the divine twins! They are further adorned with the pelts of leopards. As military units go, the Leopard Company dressed the part!

These chaps are ready for a fight too!

How did the Leopard Company end up as mercenaries? Well, let's just say "local Luccini politics" intervened. In the midst of some civil strife there may, or may not, have been a siege of the temple in which it may, or may not, have become necessary for Leopold and his men to, er, "borrow" the gold offerings stored within which in turn may, or may not, have brought down some kind of divine curse which can only be held at bay by traveling the Old World, fighting as mercenaries and sending a portion of the gold they earned back to the temple to, um, "repay" their "debt."

Leopold and the command group. He is carrying healthy-sized "sword" (more of a cleaver), and I love the pistol tucked into the belt.

Naturally the command group has the nicest collection of pelts!

It is a real thrill to get this unit over the line for a couple of reasons. First, this is a Dogs of War unit which I had not previously painted back when I owned my original collection. I had wanted to take a crack at them, but a) already had assembled a decent-size force and b) was kind of intimidated by all of the leopard-style pelts. Nearly every figure in the unit is wearing a pelt. The studio models in the army book looked amazing (of course), but painting those spotted pelts looked really tricky and beyond my brush skills at the time.

Another ranker.

25 years later wariness of painting the pelts was still holding me back, but I was determined to try...there was a lot of trial and error on the first couple of test figures, but I managed to work out an approach that seemed OK, and in particular looked pretty good when the troops were massed together. Even if the spot pattern is not exactly that of a leopard, I can always push the fantasy-escape-button. "Oh, you see, those are the pelts of the, er, 'Tilean Mountain Leopard', and the spots look...just like that..."

From this aspect you can see some of the assorted small details that add character. Like the chap at the rear with a portion of rope, the different types of packs etc. 

Each time I have completed one of these units, I have commented on how wonderful these old sculpts are. This time will be no exception - let it be said, again, that these old sculpts are just wonderful! So much character, brilliant metal sculpts from the Perry brothers. While there is, of course, broad similarity to the figures, there are a number of small little variants among the sculpts that add just enough difference, and a little touch of character, to let each figure be slightly unique while preserving the overall uniform look to the unit. It has been such a treat to paint these figures, with their crisp, proper metal lines and details. 

I love these big pike blocks!

So that is now three large, chonky pike blocks completed to serve as a solid backbone for my "Dogs of War" army, but this project is still not yet complete. The army will require some artillery support and a bit of cavalry to round things out. Time in this edition of the Analogue Hobbies Painting Challenge is running short, so those elements are likely to have to wait until the next one, but who knows what might be possible before things conclude? 

"Ready lads!"

Points-wise we have 24 figures, 28mm in size, which should be good for 120 points. That's all for now, but I hope to be back with more as the mad-dash to the AHPC finish line looms. 

=====================

Sylvain: Another convincing demonstration of your talent both with the pigment and with the verb. As you said, despite their individuality and their personal details, the figurines, as a whole, contribute to the overall sumptuousness of their company. Your projects always come with a story that I always enjoy reading. I will add 2 points for the large flag. It has been an honor to be your minion; "à la prochaine".