From MartinN: Fallschirmjäger and Firefly (65 pts.)

Another challenge is drawing to an untimely close and once again I come up short a few points. While I had a good start I rapidly lost steam and only were able to pick up speed again those last few days. I'm pretty certain that a lot of you know the feeling only too well. But the ride was a lot of fun and once again I enjoyed myself immensely. I wasn't as active on here as I'd have liked, but I enjoyed watching the daily stream of gorgeously painted miniatures.

First off for my last entry this year is a 20mm 3D printed Sherman Firefly by Arvernes Miniatures. Having painted two regular 75mm Shermans for my Canadians previously I felt the urgent need to add a Firefly for that little bit of extra punch. The stowage is mostly from AB Figures as is the tank commander.

This is then followed by a Squad of 20mm Fallschirmjäger, also from AB Figures. They're a mix of regular Heer figures, mainly with Zeltbahn, and Fallschirmjäger with head swaps as I was aiming for a very late war feel. So these should be more suitable for those battles following the German defeat in Normandy. A time when the Fallschirmjäger were a mere shadow of their former strength. I don't like the hype that surrounds some of the supposedly 'elite' German units and having this hodge podge of grizzled veterans and raw recruits is just my thing.

For points we have one 20mm tank clocking in at 15 points, a half figure tank commander for 2 points and 12 Fallschirmjäger of which two are prone figures for another 44 points. All this should give me 71 65 points.

A huge thank you for goes out to my good friends Sarah, Curt and Greg as well as all the other minions. 

***

Nick I am confident I speak for all Challenge participants when I tell you it has been an absolute treat to have you along for the ride once again. Your brushwork sets the bar, as ever, and combined with top-shelf photography, your entries are a real treat for all of us. I think many Challengers will relates to the ebbs and flows of interest and momentum when it comes to painting all of these miniatures - and many of us will come up short in the face of our targets (certainly I will!). 

But what a treat is has been! And you close out with some absolutely stunning brushwork. Nothing makes me bonkers like camouflage patterns of late WW2 German units, and you have made it look stupendous here, and the blend of the zeltbahns and sky-blue uniforms, of the veterans the rookies, it is all just spot-on and makes we want to get back to painting some WW2 myself!

But my favourite here is the Firefly! When it comes to WW2 tanks, I'm always struck by how dreary so many of the western allied designs were. Even the ones with cool names were disappointing to see. But NOT the Firefly! One of the best silhouettes of the war (and only improved once the IDF started cracking out I-Shermans later on) and you've done it absolute justice here. Even the weird colour pattern at the bottom of the barrel - excellent!

As for your points, the magical spreadsheet tells me this is all worth 65 points - so I'm going to listen to the spreadsheet. Great Challenge Nick, it has been a treat to "minion" your work!

GregB

From MartinN: Hairy arsed Barbarians (70 pts.)

For my penultimate post for this year I've got a bunch of hairy arsed Barbarians for you to enjoy. The figures are a mix of Victrix and Footsore Miniatures and were a lot of fun to paint. They're based on my usual 10x5 cm bases for use with Midgard Heroic Battles by James Morris. As I couldn't be arsed to hand paint all the different shield patterns I decided to use LBM (nowadays available through Victrix) decals instead. Backdrop is by Handiwork Games as ever

Points wise we have 14 miniatures for a total of 70 points

Lovely looking barbarians Nick, although I’m a tad disappointed that they are fully clothed given the title of your post.  I envy painters who can achieve those rugby shirt stripes on tunics.  Your transfers work well, and mark these guys as veterans of Roman units.  Love the basing and backdrop.

Peterd

From MartinN: 20mm StuG III and Opel Blitz (62 points)

This submission has been simmering for a while, but I had a hard time getting started on the weathering.  I quite like the look of the vehicles once finished, but getting there is always a little tedious in my opinion. I'd rather paint some foot sloggers instead. Anyway, here's the latest reinforcements for my German motor pool.

First of a 3D printed StuG III Ausf. F/8 from Night Sky Miniatures with an AB Figures commander. While I was a bit of an early adopter when it comes to resin printing, I never got comfortable with the process. It's smelly, dirty and needs a lot of effort to get right. In short I can stand it even less than weathering the final product. And probably that's the only reason I'm not drowning in unpainted prints and I'd call that a clear bonus. I turn on the bloody machine once or twice a year and that has to suffice.

Anyway, there are certainly upsides to the technology. For one there's lots of niche stuff out there that'd be hard to get commercially and I can scale to any scale I like. So while the file was scaled to fit 28mm originally it was quickly converted to go with my 20mm collection. Especially helpful as I feel that there's less 1/72 stuff available than it used to and if it's available it's just as expensive as 28mm.

Next is a trio of 20mm PSC German trucks. The vehicles are a little too basic for my liking, but went together easily. For a little more variety I printed a box body to go with one of them. Can't remember the sculptor though, I'm afraid.

So, 4 vehicles in 20mm as well as a half figure should give me another 62 points towards my total.

Still quite some way to go to 300pts, so we'll see how much I can squeeze in over those last few weeks.

***

Always such incredible work Nick! I am out of superlatives on the painting, beyond just noting that it meets your usual incredible standard of brushwork and weathering. I love the foliage on the vehicles, speaking very much to the whole "let's hope they think it's just some bushes moving along" amid skies full of Allied fighter-bombers. 

I also love the off-colour look of the barrel on the StuG's 75mm gun. I often don't think of how often barrels on guns like that need to be replaced, and the presence of a barrel which doesn't match the rest of the paint speaks to the under-pressure nature of the German forces late in the war. 

62 brilliant points for you!

GregB

From MartinN: Detroit Tank Arsenal (50 points)

I've to apologize for my lack of interaction here, but I've been busy with job interviews and what not those last few weeks. Also I haven't really felt like hobbying at all. But at long last I've finished something worth posting about. 

First off a 20mm PSC Lend-Lease M3 Stuart for my Soviets. The PSC kit is a sturdy enough kit, able to withstand the rigors of the wargames table well enough I imagine. Personally I'm not a huge fan of those kits as they're by necessity very basic with overblown details. Looks nice enough when painted though.

On the other end of the scale we have a 1/72 M4A4 Sherman from Dragon Models. The kit was fun to build and came with etched brass (which I didn't use) and even 3D printed (some of which I used) upgrade parts. Only let down were the vinyl tracks. First of all I managed to put on one the wrong way round and then they're just a smidgen too short, meaning that when you put them on you might snap the delicate plastic connecting the rear idler wheel to the hull... Of course I also managed to break off some of the more delicate parts during painting, but that's a whole other story full of fat fingers and too little patience. The tank commander is from the ever excellent AB Figures range.

Occupying the middle ground in model complexity is a venerable 1972 vintage ESCI M4A1 Sherman nowadays sold by Italeri. I got this one from a friend, so I can't say anything about how it went together, but looking at it I'd be highly surprised if it was any challenge at all, but as with the PSC Stuart the detail is a little basic. I really love the rounded shape of the cast M4A1 hull and hope to add a few more to my collection at some point. 

So that's about it for the moment. I do have some more half finished stuff waiting in the wings I hope to have finished before the clock runs out in about a month time. 

3x 20mm vehicles plus 1x 20mm figure (yes, it's a full figure, just lacking the boots) should net me 49 points.

***

We have missed your work Nick! I'm sure we can all relate when the elusive "hobby mojo" is just not there, owing to real life events. That said, I'm glad you have found a way to power through it, and I know I speak for all Challengers when I say it is always a real treat to enjoy your work!

And, as ever, it looks just...amazing! Incredible stuff. The green is just-right. The shading is incredible, and all of the extra bits and gear give the armour that "live, lived in" look the radiates from the photos of these vehicles on campaign in that era. They look like they have been through weather and rain and dust etc. It's just excellent. 

Plastic kits are a challenge for me too - and I suspect, a bit of a mixed bag for all of us. No doubt many can relate to details or bits being lost in the hobby process. Some of us even straight up drop them - multiple times...anyway, rest assured they have come through the process to look incredible. That is probably why I am prone to preferring a "PSC-style" kit (assuming they are ever in stock, but that is another issue) to others. 

Vinyl tracks? Screw that! You get an extra bonus point for fiddling with that nonsense. 50 points for you!

GregB

From MartinN: Kev Adams Orcs (10 points)

For various reasons I've not found much time for painting lately, so you've got to contend with these two fellows down here for the time being.

These two fine specimens of the Orc race were gifted to me by a friend during one of our semi-regular painting meet ups. I've never had much track with Fantasy, but still I've always had a soft spot for the older, more cartoony Orcs of the late 80's, early 90's. So I had a blast painting up these two fine fellows. I might even have a little look-see if I can acquire some more, who knows?

Figures are sculpted by Kev Adams and available through Ral Partha. The backdrop is available from Handiwork Games and I can only recommend you giving them a try. 

Points wise I'm pretty sure we're looking squarely at a grand total of 10 points.

***

Once more Nick you grace us with a combo of hobby nostalgia and stunning brush work! The posture and proportions of these figures just shout "1990s!" to me, and these renditions look truly stunning here. While they are proper "green", the variations on the skin tone near the eblows, knuckles etc. are amazing! And the "piece de resistance" has to be the checkerboard patterns on the red shields - it just sets the whole thing off! Brilliant work Nick! I'm sure I am not the only Challenger who hopes you will find your way to acquiring a few more of these and painting them up!

GregB

From MartinN: Orc and Orcling (10 points.)

A couple of friends and I spent the last few days together painting miniatures and talking rubbish. A great time was had and as a result of this I came home with something a little unusual for me: An Orc. I'm not quite sure if it's an official GW miniature or not, but it was great fun to paint anyway. 

Roman Lanciarii in for a nasty surprise

For these I claim 5 points for a single 28mm miniature while I'd rate the Orcling as a 15mm miniature for an additional 2 points.

***

Well, that is one crazy-looking Orc you have here Nick! As ever, your brushwork really sets the standard. Quite right...those Lanciarii are in for a rather terrible day at the office, I expect. 

I like to consider myself an old grognard and afficianado of older GW castings, but I cannot say I recognize the provenance of this chap. He certainly has the LOOK of a big scary GW orc...perhaps a Challenger will recognize the casting and its origins.

Just incredible painting as usual Nick. I'm adding three bonus points for the checker pattern on the weapons. Because that is extra awesome and you get to do that kind of thing when you are the minion. 

GregB

From MartinN: Sigurd - Fáfnir's Bane (17 Points)

Continuing on from last years theme I'm back, or better still painting away on my Middle Imperial Roman project for Midgard. My Romans are more or less done, so I've to do the opposition now it seems.

Last year I painted Brynhild, so I thought it only sensible to now paint Sigurd (Siegfried for us Germans). While the whole epic cycle around Sigurd probably refers to a later period than what I'm going for with my 3rd Century Romans, we don't really know and that's excuse enough for me.

The figures used are from Footsore Miniatures, Victrix and Armorum & Aquila Miniatures and go together quite well. Converting the chap mockingly holding up the severed head, was fun and indeed the reason to paint this whole little vignette. Sigurd and his banner bearer were collecting dust in my stash for over a decade already, but I couldn't think of a way to tell an interesting story with any of the figures I found. I love the defiant pose of the sculpt, so it had to be something special. And when I happened upon the Dark Age Archers set from Victrix I instantly knew I was on to something. Good thing I'll need archers anyway for this project, eh?

Points wise this will see me enter the roster with 17 points for 3 standing and a prone figure in addition to whatever points our Maximo Lider sees fit to throw in for the hand painted shields.

Cost of Entry

Since the beginning of the full scale invasion of Ukraine, I'm donating monthly to Ukrainian charity Come Back Alive Foundation who provide both lethal and non-lethal aid to the Armed Forces of Ukraine. Also US based Renegade Relief Runners Foundation, who deliver aid to settlements as close and sometimes closer to the frontline as is safe(-ish), gets a monthly donation. Both do sterling work, so go and check them out.

_______________________________

First, welcome back to the Challenge, Nick!

I love that you've completed the book-end to your Brynhild with this fabulous Siegfried vignette. As usual your brushwork continues to amaze, only to be outdone by your subtle conversions and additions. I find your fleshtones, fabrics and painted shields are simply incredible - a tour de force to be admired. Well done, Nick (and another 5 points I think is warranted for the work)!

Also to be credited is your donations to the two Ukrainian charities you mentioned. Those folks need all the help they can get. Very worthwhile.

- Curt

From MartinN: Middle Imperial Roman Lanciarii & the joys of rebasing [30pts]

The challenge is drawing to a close and neither have I been as productive as I had planned -not that I was expecting much, mind- nor have I been as active on here as I had intended. While I'm sitting here at my desk I can gaze upon all the figures that I set out to paint this year and it's a bit of a sobering sight. But you're not here to see me dwell on my failures, are you?

Over the last three weeks I managed to convert and paint 5 more Middle Imperial Romans for my fledgling Midgard force. This time it wasn't the heavy infantry type Legionary, but my interpretation of the somewhat enigmatic Lanciarii. We're not really certain as to how these troops fought, or indeed how they were equipped. Rather than regurgitate arguments of men far more knowledgeable as I, I simply present you with my representation of these enigmatic troops, as I’m sure you can use google just as well as I if you’re curious. I for one settled on elite light infantry, armed with short throwing spears for harrassing enemy troops, as well as large oval shields and the Spatha, making them capapble of facing an enemy head on if need be. I was undecided if I should give them helmets, but in the end decided against for no other reason than the rule of cool.

The figures are a mix of A&A and converted Victrix and again I'm rather pleased how they work together. I also used parts of the different Victrix sets to convert some of the A&A figures as frankly I find them a little dated by now. To reinforce the elite status they were all painted wearing the same clothes, very much opposed to my usual view on uniformity in the pre-modern era, with purple ornamental stripes. Rather eye catching I think. Shields are again painted by hand.

So, why then do I just claim 5 figures when clearly there are 10 on the photos? Well, I had already painted a brace of 5 figures a while ago and having had to rebase them anyway for use with Midgard, I decided to intermix them with their newer counterparts. Seems like not much has changed in my painting approach over the last couple of years.

Anyway, 5 figures á 5 points each is 25 points in total. Hurrah!

--------

What a treat these are Martin! I would be looking at the untouched minis as a "pile of potential" if these are anything to go by!

I know all too well the 'fun' of rebasing having done it last year with my Caesarian Romans, but if it brings a new lease of life for them then its worth it. They look wonderfully dynamic like that too.

...and take a few bonus points to the crisp details and lovely hand painted shields!

- Paul

From MartinN: 3rd Century AD Roman Legionaries/ Limbo (70 points)

This week too I'm running with the Middle Imperial/ Late Roman theme from last week. This time I've brought with me a base of Legionaries, which can clearly be dated to the first half of the 3rd century by their old style semi-cylindrical shield. Also the broad leather balteus, from which the Spatha was suspended, which had by then superseded the earlier Gladius short sword. Most of the Legionaries are sporting the -in my humble opinion- rather fashionable Niederbieber type helmet, also dating to the 2nd to 3rd century. As for armour they're wearing a hodgepodge of Lorica Squamata (scales), Lorica Hamata (chainmail) and the rather famous Lorica Segmental (banded metal strips), that is featured in so many Hollywood movies.

The figures themselves are a mix of Armorum & Aquila Miniatures, which by now are rather dated but almost the only commercially available figures for the 3rd century. Then there's a single Wargames Atlantic miniature from their Late Roman Legionaries set. The set fits the 3rd century almost perfectly with the inclusion of the Niederbieber helmet, but I find the details on the plastic rather soft and the Spathae much too large. That said they paint up OK. Also included are three heavily converted figures from Victrix Limited' Late Romans. To make them suitable I gave them heads from Aventine Miniatures, sculpted on the broader Balteus and designed and 3D printed  Spathae/ appropriate scabbards and Pugiones, the famous Roman daggers. Despite being noticeably larger than the other figures I do think they work together rather well. Shields are a mix of Aventine and A&A.

Painting wise I tried to give them a somewhat uniform appearance by using broadly the same colours, without painting them all the same. Personally I find it highly doubtful that Roman Legionaries ever wore anything approaching a uniform. For the shields I went with free hands and frankly, I had a blast. While at first I found it a rather daunting undertaking, I quickly realized I quite liked the look. So much so that by now I have more of those shields already painted than Legionaries waiting in the painting queue. First world problems I guess.

As some of the figures were already started before the challenge, in fact they had lain partly painted in my cupboard for a few years already, I'm claiming the Limbo bonus for this bunch.

So what do we have here?

Eight 28mm infantry plus the Limbo Bonus should give me 60 points plus whatever our dear minion is prepared to throw in for the hand painted shields and conversions.

***

Well Nick, I have no doubt that I speak for all Challengers when I say "holy crap, this looks f**king amazing!" Your brushwork is, as ever, top shelf stuff. The conversions are amazing - and you know this because, absent you telling me/us about the conversions, we would not realize they were present, so seamless and smooth does everything look. 

In particular I am impressed that you managed to squeeze Victrix models in there. While I appreciate the quality of the Victrix sculpts, their giant size has turned me away from making purchases as they seem to loom of every other type of sculpt out there. 

Seeing your Romans always inspires me to say "one, day, I'll paint some Romans!". One day...

I award 10 bonus points for hand painting shields (!!), conversions and general amazing-ness. 

70 points for you in total!

GregB

From MartinN: Burgundians... or was it Romans? (35 points)

I welcome you to my very first scheduled post this year, and yes, I'm a little bit embarrassed myself. But what should I do? I was busy with important things. Like... procrastinating?

Anyway, enough of that inane blubbering, on to the meat of the subject: Burgundians (no, not THOSE Burgundians, but those of the Nibelungen Saga) in 28mm for Midgard! Or was it Romans? A little bit of both I'd say. Knowing I'm unlikely to finish a complete force anyway I decided on adding a few Burgundian foederati to my very fledgling Middle/ Late Imperial Romans.

Midgard makes use of individually based leaders. To easily indicate the level of said heroes I decided on the number of figures per leaders base. Thus today we have Brynhild, a level 2 leader, and her hearthguard. Brynhild is from Footsore Miniatures, while her hearthguard is a converted Late Roman miniature from Victrix. Not liking the overly foldy (that's no word, isn't it?) cloak I sculpted one myself using Green Stuff and let him hold his helmet in his hand. Rather chuffed with the results I have to admit.

Next we have a base of Funditores, staff slingers, that could be Romans but could equally well be Burgundian. Instead of using the recommended 12x6 for the basing I decided on 10x5, primarily because I like the look of the narrower frontage, but equally because it saves me painting figures. For the unlikely case I'm ever fielding these in anger against someone with the bigger bases I can always add a small 2x4 base. 

Figures are Victrix again and despite the overly busy folds in the clothing, were a joy to paint. I really love the character in the faces Victrix do.

So, that's it for today. With six 28mm figures at 5 points each we have a grand total of 30 points, not taking into account any bonus points our gracious minion might deem appropriate for the conversion.

****

Hello Nick! So great to have more of your wonderful brushwork to take in. But it is more than the tremendous painting (although, as usual, it is amazing) - I just love how this post checks so many of the "mental boxes" of the wargaming-hobby-brain. In no particular order we have:

- ode to procrastination (you have come to the right place, my friend)

- ode to a game system that you like, but you are unlikely to paint a complete force for, yet here you are painting more for it...

- ode to a figure maker even as we have our little nits, complete with fun term (i.e. "foldy" - I hereby proclaim that not only to be a proper word, but an appropriate one at that!)

- refusal of a stated basing system in order to revert to a personally preferred basing look (I totally sympathize!)

I love all of it! Plus you sculpted on some bits. That gets extra points in my books - so 40 points for you! I wish you well in your battles against procrastination, and we look forward to more of your stunning brushwork!

GregB