On the other side of the "transport track" is the redoutable M3 Allied half-track from Plastic Soldier Company (PSC), not as sexy as a Hanomag perhaps but functional (see below, three M3 half-tracks full of Tommies):
PSC also provide the US with a crew version to complement the British (see below, full of GIs):
This fills out a platoon or company worth of armoured infantry (depending if you play Chain of Command or Command Decision) In addition to PSC, Academy do a M3 half track which gives nice variation in models (see below, side mounted 30 cals being of interest, so points it to the US forces):
A couple of extra shots of the German Hanomags mentioned in the previous post (see below):
Another close up of the Hanomag 251/2 81mm mortar (see below):
That's a few plastic boxes of models shifted from the loft to the "to be painted" boxes in the cupboard ;)
A final note for 2016:
I seemed to "struggle" with the blog this year, barely making 100 posts. Lots happening, mostly good, moving jobs and a growing (as in kids getting older) family makes inroads into hobby time. HAd fun and used some games to keep in touch with some old friends which was good
Best wishes to one and all in advance of 2017 ;)
The ongoing adventures of a boy who never grew out of making and playing with plastic model kits (and even some metal ones too). Also a wargamer in search of the perfect set of wargaming rules for WWII Land and 20th Century Naval campaigns.
Showing posts with label M3 Half Track. Show all posts
Showing posts with label M3 Half Track. Show all posts
Saturday, 31 December 2016
Wednesday, 23 September 2009
US Armoured Infantry
Here's one I've done previously, to use the infamous 'Blue Peter' presenter catch-all phrase. A mixed manufacturer picture of an Esci White Scott Car (OK so there are no decals, what's new there then), part of a Hasagawa M3 Half Track and some (squad of) my Revell WW2 American Ardennes infantry. These were done as a trial batch a couple of years ago.
The plan was/is to set a factory production system and "go through the lot" (and there is an awful lot of bare green plastic) in a week. They were my first attempt at the PVA pre-coat system, but suffer methinks from too much PVA covering too much detail.
The paint scheme is taken from the back of the Revell box and is now in question. These are slightly later figures than the Valiant Miniatures 1942-44 GI but I do so like Valiant's painting guide. Also, although not a fan (or rather I am ignorant of the Flames of War system) their 'all the colours you need' US painting pack looks quite an attractive option too.
The above however will remain painted as is for posterity and more importantly are wargame ready :)
The plan was/is to set a factory production system and "go through the lot" (and there is an awful lot of bare green plastic) in a week. They were my first attempt at the PVA pre-coat system, but suffer methinks from too much PVA covering too much detail.
The paint scheme is taken from the back of the Revell box and is now in question. These are slightly later figures than the Valiant Miniatures 1942-44 GI but I do so like Valiant's painting guide. Also, although not a fan (or rather I am ignorant of the Flames of War system) their 'all the colours you need' US painting pack looks quite an attractive option too.
The above however will remain painted as is for posterity and more importantly are wargame ready :)
Labels:
1/72,
1/76,
20mm,
American,
American Infantry,
Esci,
GI,
Hasagawa,
Infantry,
Italeri,
M3 Half Track,
M3 White Scout Car,
Revell WW2 American Infantry,
US,
WW2,
WWII
Subscribe to:
Posts (Atom)