The commissioning of HMS Canopus (80 Guns)

I have been putting this off for a while now but I faced my fears as in "Napoleonic Ship Rigging". HMS Canopus is put through her rigging paces, firstly with her bow-spit (see below):

Then her fore and mizzen masts, see the innocuous spidery threads appearing (see below):

Tip: It was so much easier having pre-drilled (some but sadly not all) 'thread holes' on the ship before I started attaching the masts and sails (see below):  

Tricky business but thankfully I have a cup of char to hand as HMS Thunderer and HMS Canopus share a berth together (see below):

The aft mast and sail is stuck firmly into its place (see below). Sadly I had forgotten to drill the wholes associated with rearmost mast ropes so there was a 'tense moment' as I had to add another couple of holes.With all three masts in place she is coming together rather nicely (see below):

Half of the RN squadron is now constructed, with another (74) and (100 aka HMS Victory) still to do. Both completed ships (HMS Canopus [left] and HMS Thunderer) really need a 'flag' and I need to figure how to put on some "ratlines" running up from the base of each mast to add a touch of class to the model (see below):  

A little closer look at HMS Canopus. The central rigging does add a bit of much needed internal strength to hold the masts together (see below):

Apologies for any incorrect or misuse of nautical terminology. That is two down and just another "six" (Napoleonic battleships) to go, but I am short of "frigates" so I may have to invest in another Navwar "Fleet Pack" nearer my birthday

Note: As this is way off in the autumn it gives me a fighting chance to complete the "six that are on the stocks" first.

;)

Next RN Napoleonic ship: HMS Canopus (80 Gun)

The next ship in my RN squadron is the 80 gun HMS Canopus currently getting fitted out on my painting tray (see below):

Masts and sails are now painted with the first layer of yellow (classic RN) stripes have been applied, which should help her being distinguished as a "friend" rather than a "foe" (see below):

The hull still needs a bit of dark ink shading and a little yellow touch up before I have another stab at some tricky rigging. This time I have at least "drilled some holes in the hull ahead of super-gluing the masts on,"which is a far, far better order.  

I am looking at the possibilities of using "brush bristles" from the Pound Shop instead of the tricky cotton thread, but have not managed to find the cheap £1 brush yet espoused by my fellow Hartlepudlian wargamers, the quest continues (watch this space).  

Napoleonic Shipbuilding (cont) : Navwar 1/1200 Rigging "How I did it"

"Round two," and I face my nemesis the rigging (dramatic organ music). My Langton miniatures "rigging booklet" is a masterclass and delving into a level of detail beyond what is needed for the 1/1200 Navwar models, but it does provide some useful insights into basic "standard rigging".

It looks (and most definitely is) an art form. Although it frightens me, I know I have to have a go. My minimalist approach books down to the following steps (and I apologize for my own inaccurate terminology):

• A heavy thread from the tip of the bow spit (front of ship) to the top of the first two masts, winding round the mast heads as I go. This gives a certain front strength to the model, otherwise the masts would be all over the place. Dabs of super glue secure the thread into place.
• From the middle (mizen?) mast to the back one, an extra hole has to be drilled two thirds the way up the big mast to connect a thread the top of the back mast (the hard earned lesson of experience here is to drill the middle mast before you fix it in the hull otherwise you will pay dearly in contributions to the nautical "swear box" as you inadvertently bend things
• Now we can add some side-to-side strength by drilling holes in the top bit of the hull to run thread  up to the top of the masts. Six holes are required (three pairs), each pair being about a centimeter back from the mast. The ship is becoming surprisingly solid (but still fragile if dropped) at this point 

The results from this stage are shown below, my first 'heart of oak':

What is not shown is the pain associated with 'breaking a good paint-job' by drilling holes and spreading superglue (or "super finger stick" as I ended up calling it).

 Before this point the ship has definitely got to be painted a 'deck out'. Undercoat the model black, then a deep brown base coat and perhaps a mid-tone brown on the outer hull, but paint the deck much lighter "yellow-brown to a bleach-bone" and take it to a higher level of highlight because you won't get your brush back inside the frame of the ship again.

Using superglue and cotton thread is a mercurial combination. Anyway, plenty of touch-up painting followed.

Then comes a touch of necessary aesthetics, as the bow sails needed a bit of rigging, otherwise Harry Potter is required to keep the sails in place. If you look very, very carefully you will see black cotton threads leading out from the hull of the ship connecting to the sails (see below):  

Shown from another angle (see below). I have not attempted rat-lines that would straddle either side of all the masts (Pirates of the Caribbean fashion) for want of having no appropriate material. I need to move onto the "flag" section of the Langton book for a nice ensign to flutter in the breeze. It needs to be done to finish things off properly though.

The production line has started (see below). HMS Thundered [74] (top middle), HMS Canopus [80](middle), having hull and sail/mast holes drilled before undercoating and the raw lead of HMS Impeccable [74] (bottom left). I have to say for some reason HMS Thunderer is a small 74, don't know why so I might have to investigate via Google.

Note: Still in its pack is HMS Victory, I have to save the best till last to honour Nelson.

So far so good but after this sudden spurt (the first in ten years) will my enthusiasm dry up or will I catch the wooden wall bug. Satisfying but hard work ;)

Navwar Napoleonic Ships 1/1200 (Another Naval Distraction)

What I love about Wargaming is the stuff that comes out of the blue and rekindles a "stalled" project. A great example of this is an unexpected conversation with my Redcar Wargaming friends, with respect to "what to do next" (after the Thirty Years War) and the subject of Napoleonic ships unexpectedly came up.

This was a project I had dabbled with and then stopped years ago, getting as far as painting a Royal Navy 74 gun ship (HMS Thunderer), but not rigging her [for fear of the threads] (see below):

Also on the stocks, but not so far along, is another Royal Navy ship, a 80 gunner (HMS Canopus, a captured Frenchman if my memory serves me correctly) just waiting for the moment of "inspiration" to take hold (see below):

Then follows the "silver fleet" still in their packets, two more British, three French and a Spanish (see below):

What I am finding ever so daunting is the prospect of the "rigging", I am trying to work out what I can get away with in a minimalistic sense. I am working down from my Langton Miniatures "complete" rigging booklet. Just a few lines to strengthen the sails so that they do not easily "snap off".

Any tips appreciated.

PS: The rules we intend to use are: Sails of Glory .. watch this space