To those with "eagle eyes" a 'Moria Cave Troll with spear' is to the top right. The Balrog beastie took a good hour fiddling away with before the flash and lead channels were snipped, shaved and filed away. It had to be said there is a vicious 'lead bend' in the model affecting the tail and head, so Milliput or green stuff" will be required and copious addition filing to get it right. This is not a snap-and-fit model for sure and probably one of the reasons GW abortively experimented with resin FineCast.
Showing posts with label Moria. Show all posts
Showing posts with label Moria. Show all posts
Tuesday, 26 November 2019
Games Workshop LOTR Balrog Project
In tandem with my sons Duke of Edinburgh "model making" activity (he is doing a GW LOTR Dragon, no not Smaug, it is the smaller GW Dragon model) I have finally decided to go "Balrog" and attempt the iconic monster from the first movie (see below, the disassembled pieces "lying in state" but cleaned):
To those with "eagle eyes" a 'Moria Cave Troll with spear' is to the top right. The Balrog beastie took a good hour fiddling away with before the flash and lead channels were snipped, shaved and filed away. It had to be said there is a vicious 'lead bend' in the model affecting the tail and head, so Milliput or green stuff" will be required and copious addition filing to get it right. This is not a snap-and-fit model for sure and probably one of the reasons GW abortively experimented with resin FineCast.
To those with "eagle eyes" a 'Moria Cave Troll with spear' is to the top right. The Balrog beastie took a good hour fiddling away with before the flash and lead channels were snipped, shaved and filed away. It had to be said there is a vicious 'lead bend' in the model affecting the tail and head, so Milliput or green stuff" will be required and copious addition filing to get it right. This is not a snap-and-fit model for sure and probably one of the reasons GW abortively experimented with resin FineCast.
Thursday, 10 September 2009
Metal problem in Moria solved
Gotcha Mr Metal Goblin!
Stop Press: Factory batch process abandoned on the Metal Goblins. Each figure is now treated as an individual in a 'holistic' arty manner before going onto the next one, sounds almost like therapy to me. I probably needed a well earned break from painting endless batches of GW "Camo Green" and GW "Bolt Gun Metal" body parts anyway.
The individual process is far slower but with only ten metals to paint some form of forward progress can be maintained, one down, nine to go!
:)
Wednesday, 9 September 2009
Troublemakers: The Goblins of Moria
Now the painting tray stands almost empty, quite forlorn .
Gone are the tanks and aircraft.
What is left is the evil Goblin hoard that has all but broken my will to paint them, but that is what Goblins are good at, being evil and sneaky.
The background to this madness:
It all started when I joined in a HOTT (Hoards Of The Things) Campaign down at my local wargames club. Despite my not having a 15mm army I became an Orc Chieftain (of Bogland) through a generous donation/loan by the campaign referee. The game was a blast (and is still ongoing) so I came away enthused and charged to do some HOTT fantasy figures of my own. The trouble was that I had a stack of unpainted 20mm LOTR (Lord of the Rings) figures from GW (Games Workshop) and couldn't really justify in my own mind doubling up with an equivalent army of smaller 15mm goblins! Rather than base the LOTR figures individually I would HOTT them in stands, a perfect solution, or was it?
The planned HOTT Moria Goblin Army:
9 x 7Hd (Hoard) = 9 AP
1 x 3Wb (Warband General) = 2 AP
1 x 3Wb (Warband) = 2 AP
1 x Shaman (Cleric) = 3 AP
2 x Troll (Behemoth) = 8 AP
Total 24 AP (Army Points)
Variations:
1 x 4Bw (Shooters) = 2 AP
1 x Balrog (God) = 4 AP
2 x Warg Riders (Riders) = 4 AP (2 AP each)
1 x Gollum (Sneaker/Lurker) = 3 AP or 1 AP
It all started well, I batched my "plastics" up in groups of tens and started off in factory production mode. It became an organised ritual part of the day and the figures stacked up nicely. I even decided to upgrade my hoard numbers from five on a base to seven as I was using the 25mm basing sizes. Five on a base looked like a skirmish formation rather than a seething, dangerous hoard. So far so good and I raced through forty eight plastics in about three to four weeks. Here are the "good" plastic Moria Goblins [Work In Progress = basing + 15 plastics to paint for my Army List]
:)
Then I hit the GW metals and promptly got "metal fatigue". The "bad" Moria Goblins [Work In Progress = highlighting and basing]
:(
They just broke my rhythm and concentration, instead of a set of familiar poses they were all oddly unique. I fought the urge to open up my last packet of plastics as I deemed that would be a severe loss of face in front of the metal Goblins. I stood at an impasse.
By way of distraction I started to tidy up, or not in the case of the Jaguarundi and the late war German stuff took my eye. I started searching on the Internet for an appropriate painting scheme, I fell into some blogs and thought I fancy a go at that. So its time to be "up and at those Goblins" (any inspirational comments appreciated) , watch this space ;)
Note: On the upside, after reading a friends recent post on their wargame blog: http://thewargameshed.blogspot.com/2009/08/jws-reunion.html, l liked what I saw on the creative use of a chessboard for Balin's Tomb. Hence I shall leave a good dozen of the plastics individually based after all for those inevitable AD&D adventure nights with old friends from school.
:)
Gone are the tanks and aircraft.
What is left is the evil Goblin hoard that has all but broken my will to paint them, but that is what Goblins are good at, being evil and sneaky.
The background to this madness:
It all started when I joined in a HOTT (Hoards Of The Things) Campaign down at my local wargames club. Despite my not having a 15mm army I became an Orc Chieftain (of Bogland) through a generous donation/loan by the campaign referee. The game was a blast (and is still ongoing) so I came away enthused and charged to do some HOTT fantasy figures of my own. The trouble was that I had a stack of unpainted 20mm LOTR (Lord of the Rings) figures from GW (Games Workshop) and couldn't really justify in my own mind doubling up with an equivalent army of smaller 15mm goblins! Rather than base the LOTR figures individually I would HOTT them in stands, a perfect solution, or was it?
The planned HOTT Moria Goblin Army:
9 x 7Hd (Hoard) = 9 AP
1 x 3Wb (Warband General) = 2 AP
1 x 3Wb (Warband) = 2 AP
1 x Shaman (Cleric) = 3 AP
2 x Troll (Behemoth) = 8 AP
Total 24 AP (Army Points)
Variations:
1 x 4Bw (Shooters) = 2 AP
1 x Balrog (God) = 4 AP
2 x Warg Riders (Riders) = 4 AP (2 AP each)
1 x Gollum (Sneaker/Lurker) = 3 AP or 1 AP
It all started well, I batched my "plastics" up in groups of tens and started off in factory production mode. It became an organised ritual part of the day and the figures stacked up nicely. I even decided to upgrade my hoard numbers from five on a base to seven as I was using the 25mm basing sizes. Five on a base looked like a skirmish formation rather than a seething, dangerous hoard. So far so good and I raced through forty eight plastics in about three to four weeks. Here are the "good" plastic Moria Goblins [Work In Progress = basing + 15 plastics to paint for my Army List]
:)
Then I hit the GW metals and promptly got "metal fatigue". The "bad" Moria Goblins [Work In Progress = highlighting and basing]
:(
They just broke my rhythm and concentration, instead of a set of familiar poses they were all oddly unique. I fought the urge to open up my last packet of plastics as I deemed that would be a severe loss of face in front of the metal Goblins. I stood at an impasse.
By way of distraction I started to tidy up, or not in the case of the Jaguarundi and the late war German stuff took my eye. I started searching on the Internet for an appropriate painting scheme, I fell into some blogs and thought I fancy a go at that. So its time to be "up and at those Goblins" (any inspirational comments appreciated) , watch this space ;)
Note: On the upside, after reading a friends recent post on their wargame blog: http://thewargameshed.blogspot.com/2009/08/jws-reunion.html, l liked what I saw on the creative use of a chessboard for Balin's Tomb. Hence I shall leave a good dozen of the plastics individually based after all for those inevitable AD&D adventure nights with old friends from school.
:)
Subscribe to:
Posts (Atom)